All Products

SKU: AF-5303

The Adafruit ESP32-S2 Feather with BME280 is identical to the standard ESP32-S2 Feather but with an on-board BME280 temperature, humidity, and barometric pressure sensor at I2C address 0x77. This makes it an instant IoT environmental monitor — just add Wi-Fi credentials and start logging. Built ...

SKU: AF-3574

The Feather nRF52 Pro is an advanced Bluetooth Low Energy development board built around the Nordic nRF52832, designed specifically for use with the Apache Mynewt RTOS. It features a fully open-source BLE 5.0 stack, a serial bootloader for command-line firmware flashing, and an on-board SWD debug...

SKU: AF-5400

The Adafruit ESP32 Feather V2 is a major redesign of the original HUZZAH32 ESP32 Feather, featuring 8 MB flash, 2 MB PSRAM, USB-C, a STEMMA QT port, a NeoPixel, and a user button. The dual-core ESP32 at 240 MHz provides Wi-Fi and Bluetooth Classic/LE connectivity for wireless and IoT projects. D...

SKU: AF-5438

The Adafruit ESP32 Feather V2 with w.FL Antenna is identical to the standard ESP32 Feather V2 but replaces the PCB trace antenna with a w.FL (MHF3/IPEX3) connector for attaching an external antenna. This makes it ideal for use inside enclosures or when you need improved range from a larger dipole...

SKU: AF-5477

The Adafruit ESP32-S3 Feather with 4 MB Flash and 2 MB PSRAM brings the dual-core ESP32-S3 to the Feather ecosystem with Wi-Fi, Bluetooth LE, and native USB. The 2 MB PSRAM provides extra memory for large data buffers, making it well-suited for CircuitPython or projects that need fast SRAM access...

SKU: AF-5483

The Adafruit ESP32-S3 TFT Feather features a built-in 1.14" IPS colour TFT display (240×135 pixels, ST7789) on the front of the board. Combined with the dual-core ESP32-S3's native USB, Wi-Fi, Bluetooth LE, 4 MB flash, and 2 MB PSRAM, it provides a complete visual IoT platform in the Feather form...

SKU: AF-5345

The Adafruit ESP32-S2 Reverse TFT Feather places a 1.14" IPS colour TFT display (240×135 pixels, ST7789) on the back of the board, making it ideal for panel-mounted projects where the screen faces outward through an enclosure. Three user buttons (D0, D1, D2) alongside the display provide a comple...

SKU: AF-5714

The Feather RP2040 with RFM95 LoRa Radio (915 MHz) combines the RP2040 dual-core processor with an SX1276-based LoRa radio transceiver for long-range wireless communication at 868 or 915 MHz. The frequency is software-configurable for your region's ISM band. LoRa modulation delivers over 2 km ran...

SKU: AF-5712

The Feather RP2040 RFM69 Packet Radio (868/915 MHz) combines the RP2040 dual-core processor with an SX1231-based RFM69HCW radio transceiver for wireless data communication. The exact frequency is software-configurable for 868 MHz or 915 MHz ISM bands. It includes a STEMMA QT connector and a uFL c...

SKU: AF-5724

The Adafruit RP2040 CAN Bus Feather combines the powerful RP2040 microcontroller with an MCP25625 CAN controller and transceiver, giving you a ready-to-go CAN Bus interface in the compact Feather form factor. No soldering is needed to get started — just connect your CAN Bus lines to the included ...

SKU: AF-5727

The Adafruit RP2040 Feather ThinkInk makes it easy to connect almost any common e-Paper/e-Ink display with a standard 24-pin FPC connector. E-paper displays retain their image even when power is completely disconnected, and offer high contrast with excellent daylight readability — just like print...

SKU: AF-5768

The Adafruit RP2040 Prop-Maker Feather is an all-in-one board designed for building props, cosplay pieces, lightsabers, animatronics, and interactive toys. It combines the RP2040 microcontroller with a prop-making toolkit — I2S audio amplifier, NeoPixel driver with level shifting, accelerometer, ...

SKU: AF-3406

The Feather nRF52 Bluefruit LE is an all-in-one Bluetooth Low Energy development board built around the Nordic nRF52832. Unlike earlier Bluefruit Feathers that used a separate helper chip, the nRF52832 runs your application code and handles BLE directly — resulting in lower power consumption, low...

SKU: AF-3176

The Feather M0 RFM69HCW Packet Radio (868/915 MHz) combines the ATSAMD21G18 ARM Cortex M0+ processor with an SX1231-based RFM69HCW radio transceiver for wireless data communication at 868 or 915 MHz. The exact radio frequency is software-configurable, allowing you to tune dynamically for your reg...

SKU: AF-3177

The Feather M0 RFM69HCW Packet Radio (433 MHz) combines the ATSAMD21G18 ARM Cortex M0+ processor with an SX1231-based RFM69HCW radio transceiver for wireless data communication at 433 MHz. It includes built-in USB, LiPo battery charging, and the full Feather M0 pin set in a compact, portable form...

SKU: AF-3179

The Feather M0 RFM96 LoRa Radio (433 MHz) combines the ATSAMD21G18 ARM Cortex M0+ processor with an SX1276-based LoRa radio transceiver for long-range wireless communication at 433 MHz. LoRa modulation delivers significantly greater range than conventional packet radio — over 2 km line-of-sight w...

SKU: AF-3178

The Feather M0 RFM95 LoRa Radio (900 MHz) combines the ATSAMD21G18 ARM Cortex M0+ processor with an SX1276-based LoRa radio transceiver for long-range wireless communication at 868 or 915 MHz. The exact frequency is software-configurable, allowing you to tune dynamically for your region's ISM ban...

SKU: AF-3061

The Feather M0 WiFi with uFL pairs the ATSAMD21G18 ARM Cortex M0+ processor with an ATWINC1500 Wi-Fi module, featuring a uFL connector instead of an on-board antenna. This allows you to connect an external 2.4 GHz antenna for improved range or custom antenna placement in enclosures. The ATWINC15...

SKU: AF-2796

The Feather M0 Adalogger is an all-in-one datalogger built around the ATSAMD21G18 ARM Cortex M0 processor, with a built-in MicroSD card holder, native USB, and LiPo battery charging. With 256KB of flash and 32KB of RAM — 8× and 16× more than the ATmega328 or 32u4 respectively — it provides signif...

SKU: AF-2884

The FeatherWing Proto is a prototyping add-on board compatible with all Adafruit Feather boards. It provides duplicate breakouts for every Feather pin, a grid of proto holes for custom circuitry, and connected pad strips for GND and 3.3V — everything you need to add custom components to your Feat...