All Products

SKU: AF-4339

This laser-cut acrylic enclosure kit turns your 4×4 NeoTrellis setup into a handheld device with an elegant black and white design and beautifully diffused button illumination. Designed to house any Adafruit Feather board (except FONA) alongside the NeoTrellis RGB Driver PCB. The enclosure inclu...

SKU: SF-ROB-14760

Here is a simple, low-cost, high quality servo for all your mechatronic needs. This servo is able to take in 6 volts and deliver 44.4 oz-in. of maximum torque at 0.18 sec/60° This is a small servo with a standard 3 pin power and control cable (red = power, brown = ground, and yellow = data), and...

SKU: AF-4372

This laser-cut acrylic enclosure kit turns your 8×8 NeoTrellis setup (four 4×4 NeoTrellis boards) into a handheld device with an elegant black and white design and beautifully diffused button illumination. Designed to house any Adafruit Feather board (except FONA) alongside four NeoTrellis RGB Dr...

SKU: AF-3622

Add heat-vision to any Feather board with the Adafruit AMG8833 Thermal Camera FeatherWing. This sensor from Panasonic contains an 8×8 array of infrared thermal sensors that returns 64 individual temperature readings over I2C — like a compact thermal camera in FeatherWing form factor. The AMG8833...

SKU: AF-3232

Add long-range LoRa radio to any Feather board with the Adafruit LoRa Radio FeatherWing. Built around the SX127x LoRa module, this add-on provides kilometre-range packet radio communication at 433 MHz — perfect for sensor networks, remote monitoring, and bridging to the Internet via a WiFi or cel...

SKU: AF-3231

Add long-range LoRa radio to any Feather board with the Adafruit LoRa Radio FeatherWing. Built around the SX127x LoRa module, this add-on provides kilometre-range packet radio communication at 900 MHz (tuneable to 868 MHz or 915 MHz) — perfect for sensor networks, remote monitoring, and bridging ...

SKU: AF-3173

A simple, solder-on terminal block set sized to fit Adafruit Feather boards and FeatherWings. These 0.1″ pitch terminal blocks let you make secure, screw-down wire connections without soldering wires directly to your board — making projects easier to build, maintain, and modify. Compatible with ...

SKU: EF-EF04020

Octopus Electronic Bricks, you can use them build electronics projects just as easy as piling bricks. By using Octopus electronic bricks, you may connect Arduino/Freaduino compatible boards easily with various digital, analog and I2C/Uart interfaces. These the breadboard-less firm connection a...

SKU: AF-3088

The Adafruit 4-Digit 7-Segment LED Matrix Display FeatherWing makes it easy to add a numeric display to any Feather project. The HT16K33 driver handles all LED multiplexing over I2C, so your Feather only needs two shared pins — leaving all other GPIO free for sensors, buttons, and additional disp...

SKU: SF-PRT-13268

A large prototyping PCB with v-scored lines that let you snap it to any custom size. The 50 × 25 solder point array provides up to 1250 plated through-hole (PTH) pins on a 2.54 mm (0.1″) pitch grid. Simply snap along the scored lines to create the exact board dimensions your project requires. Ke...

SKU: AF-5793

This is a screen for advanced hackers who like the look of a nice, round TFT screen with tons of pixels. This massive 4" diagonal-sized display has 720x720 16-bit full-color pixels and is an IPS display, so the color looks great up to 80 degrees off-axis in any direction. The TFT driver is ST7...

SKU: SF-DEV-23386 · MPN: DEV-23386

Say hello to the next generation of Pro Mini boards - the SparkFun ESP32 Qwiic Pro Mini houses the powerful ESP32-PICO-MINI-N8R2 from Espressif on our compact Pro Mini footprint with 2MB of PSRAM. With two individually controllable CPU cores, adjustable CPU clock frequency, a co-processor that ca...