All Products
Showing 381-400 of 9125 products · 2275 unavailable products hidden
2.13-inch 250x122 Quad-Colour eInk/ePaper Bare Display
·
This bare eInk/ePaper display element gives you a compact 2.13-inch electronic paper screen with quad-colour output: red, black, yellow and white. Like an e-reader display, it is high contrast, daylight readable, and can keep the last image visible even when power is completely disconnected.Pleas...
2.13inch E-Paper (G) raw display, 250x122, Red/Yellow/Black/White
A 2.13″ four-colour e-paper raw display from Waveshare, capable of rendering red, yellow, black, and white — making it ideal for eye-catching price tags, shelf labels, and status indicators. Like all e-ink panels, it retains the displayed image indefinitely with no power applied and consumes ener...
2.13inch E-Paper HAT (G), 250x122, Red/Yellow/Black/White, SPI Interface
A 2.13″ four-colour e-paper display HAT from Waveshare that plugs directly onto a Raspberry Pi via the standard 40-pin GPIO header. The panel renders red, yellow, black, and white ink for vivid, attention-grabbing content — perfect for price tags, shelf labels, and low-power status displays. Unl...
2:1 3mm Heatshrink Tubing 5m Black
A 5-metre roll of 2:1 ratio heatshrink tubing in black, with a 3 mm pre-shrink diameter. Shrinks to half its original size when heated, providing insulation, strain relief, and protection for solder joints, wire splices, and cable connections. Supplied in a neat box for workshop storage. Shrink ...
2:1 5mm Heatshrink Tubing 5m Black
Jaycar 2:1 heatshrink tubing in a convenient 5-metre roll, ideal for insulating solder joints, bundling wires, and protecting cable terminations. The 5mm diameter shrinks down to 2.5mm, providing a snug, protective sleeve over connectors and splices. Sold in a stackable box (49 × 177 × 165 mm) t...
2.1mm 5VDC Barrel Jack to USB C Adapter
·
A simple adapter that converts a standard 2.1 mm DC barrel jack into a USB-C plug, letting you power USB-C devices from common 5 V barrel-jack wall adapters. Plug it onto the end of your existing power supply and connect straight to a Raspberry Pi 4 or any USB-C device that runs on 5 V without US...
2.1mm DC Barrel Jack to 1st Generation MagSafe Adapter
·
A passive adapter with a 1st-generation MagSafe plug on one end and a 5.5 mm / 2.1 mm DC barrel jack (centre-positive) on the other. It lets you connect a 15–20 VDC barrel-jack power supply to devices that use the original MagSafe connector — useful for bench testing, custom power setups, or repl...
2.1mm DC Barrel Jack to Alligator Clips
·
Turn any 2.1 mm barrel-jack wall adapter into a handy bench power supply with this adapter cable. The moulded DC barrel jack connects to your power supply, while colour-coded alligator clips (red for centre-positive, black for ring-negative) let you quickly clip onto bare wires, terminals, or tes...
2.1mm DC Barrel Plug to Alligator Clips
·
Connect a battery pack or bare wires to any device with a 2.1 mm DC barrel jack input using this adapter cable. Colour-coded alligator clips (red for centre-positive, black for ring-negative) clip onto battery terminals or exposed wires, while the moulded 2.1 mm barrel plug feeds power straight i...
2.1mm DC Power Jack with Rocker Switch
·
A 2.1 mm DC barrel jack with a built-in rocker switch, giving you a simple on/off control for devices that lack a dedicated power switch. It shares the same PCB footprint as a standard non-switched barrel jack, so it drops straight into existing designs without layout changes. Plug in your power...
2.1mm DC Power Jack with Slide Switch
·
A 2.1 mm DC barrel jack with a built-in slide switch, giving you simple on/off control for devices that lack a dedicated power switch. It shares the same PCB footprint as a standard non-switched barrel jack, so it drops straight into existing designs without layout changes. Plug in your power su...
2.1mm DC Power Line Female Connector
A standard 2.1mm barrel plug connector for DC power applications. This female line connector features solder terminals for secure, permanent connections to your power cables. The 5.5mm outer / 2.1mm inner diameter is the most common DC power connector size, compatible with a wide range of power ...
![2.1mm female/male barrel jack extension cable [1.5m / 5 ft]](/rails/active_storage/representations/redirect/BAh7BkkiC19yYWlscwY6BkVUewdJIglkYXRhBjsAVGkCKaZJIghwdXIGOwBUSSIMYmxvYl9pZAY7AEY=--c82168fa2c30c7297fcf25297dcf84ba525a3623/BAh7BkkiC19yYWlscwY6BkVUewdJIglkYXRhBjsAVHsHOgtmb3JtYXRJIghqcGcGOwBUOhJyZXNpemVfdG9fZml0WwdpApABaQKQAUkiCHB1cgY7AFRJIg52YXJpYXRpb24GOwBG--4cc5678865497cdbcf7b02aee5242eda5f847322/image_925d0a32-8a25-4211-985d-50d61543e27c.jpg)
2.1mm female/male barrel jack extension cable [1.5m / 5 ft]
·
A 1.5-metre (5 ft) extension cable with a 5.5 / 2.1 mm barrel jack (female) on one end and a barrel plug (male) on the other. Heavy-duty 24 AWG wires handle up to 5 A, making it suitable for powering LED strips, Arduino boards, and other current-hungry projects at a distance. This cable also dou...
2.1mm to 1.7mm DC jack adapter
·
A small adapter that converts a standard 5.5 / 2.1 mm DC barrel plug into a 4.0 / 1.7 mm plug, letting you use common 2.1 mm wall adapters with devices that have a smaller 1.7 mm DC jack input. Key Features 2.1 mm Jack Input – Accepts standard 5.5 / 2.1 mm barrel plugs 1.7 mm Plug Output – Fi...
2.1mm to 2.5mm DC Barrel Plug Adapter
·
A simple adapter that sits inside a 5.5 / 2.5 mm DC barrel jack, allowing you to use a standard 5.5 / 2.1 mm barrel plug with it. Just insert the adapter into the device's 2.5 mm jack, then plug in your 2.1 mm power supply as normal. Key Features 2.5 mm to 2.1 mm Conversion – Adapts a 2.5 mm I...
2200mAh Powerbank Black
A compact 2200mAh portable powerbank for recharging smartphones, cameras, wearable devices, and other USB-powered gadgets on the go. The small form factor makes it easy to carry in a bag or attach to a keychain via the built-in loop. Key Features 2200mAh Capacity – Provides up to 80% charge to...
2208 3-Phase BLDC Motor with AS5600 Encoder - 12V 1800RPM
·
This compact 2208 three-phase brushless DC motor combines a 12V BLDC motor with an integrated AS5600 magnetic encoder, making it a practical choice for closed-loop motor control and FOC experiments. It provides 300g.cm of torque and 12-bit position feedback for smooth, low-noise motion in project...
220 Ohm 1/4W PTH Resistor
·
This 220 Ohm through-hole resistor is a handy general-purpose component for breadboards, perf boards and other prototype builds.It is a 1/4 Watt PTH axial resistor with ±5% tolerance, made with carbon film construction. The leads are a more breadboard-friendly thickness than the previous version,...
220 Ohm 1 Watt Carbon Film Resistors - Pack of 2
A pack of two 220Ω carbon film resistors rated at 1W continuous power. These through-hole axial resistors are suitable for general-purpose electronics projects requiring higher power handling than standard ¼W resistors. Specifications Resistance: 220Ω Tolerance: ±5% Power Rating: 1W Type: C...
220uF 16V Electrolytic Capacitors - Pack of 10
·
A pack of ten 220µF 16V electrolytic capacitors with long flexible leads, ideal for breadboard and perfboard projects. These capacitors can be used with any DC voltage up to 16V and feature clear labelling on the body for easy identification. Electrolytic capacitors are well suited for low-frequ...
