All Products

SKU: AF-1580

Getting touchy performance with your screen's touch screen? Resistive touch screens are incredibly popular as overlays to TFT and LCD displays. If you want to connect one to a computer you need something to handle the analog to digital conversion. Most converters we've found are not very easy ...

SKU: DF-FIT0478

This capacitive touch panel overlay adds touch input to your LattePanda 7" IPS Display (sold separately). Simply apply the adhesive panel over the display, connect the FPC cable, and power the board for a complete touch interface. The panel features 6H surface hardness for scratch resistance, 85...

SKU: DF-FIT0477

This 7" IPS display is designed specifically for the LattePanda single board computer. Simply connect it via the MIPI FPC connector and power your LattePanda — no extra power cables required. The display border is insulated with black tape to prevent short circuits, making it safe to use even wit...

SKU: AF-3578

Pimoroni's HyperPixel features a 4.0" display with 800x480 18-bit color pixels and a capacitive touch overlay, making it more sensitive and responsive than a resistive touch display. The plate uses the high speed DPI interface on the Pi and can use the mini display as a console, X window port, di...

SKU: DF-DFR0928

A 1.8-inch IPS TFT LCD display module with 128×160 resolution and an integrated microSD card slot for reading full-colour bitmaps. Driven by the ST7735S chip over SPI (4-wire), the display offers a 120° viewing angle and low power consumption, making it suitable for sensor dashboards, status moni...

SKU: AF-2453

The Adafruit DPI TFT Kippah with Touch Support connects a 40-pin TTL TFT display directly to your Raspberry Pi's GPIO header, bypassing the need for an HDMI encoder/decoder. This version adds resistive touchscreen capability via USB, making it suitable for interactive projects and kiosks. Compat...

SKU: DF-FIT0955 · MPN: FIT0955

An 11.6-inch 1920×1080 IPS touch display that connects directly to LattePanda single-board computers via eDP (Embedded DisplayPort). The ultra-thin, narrow-bezel design and multi-touch input make it well suited for portable projects, kiosks, and human-machine interface (HMI) applications. The eD...

SKU: DF-DFR1125 · MPN: DFR1125

The DFRobot 14" 4K IPS Bar Touch Display is a uniquely shaped secondary monitor with a 3.5:1 aspect ratio and 3840×1100 resolution. Designed to sit above or below your main screen, it provides a dedicated space for stock tickers, system monitoring, chat windows, media timelines, or any content th...

SKU: DF-FIT0950

This 7" IPS touch display connects to the LattePanda Mu and LattePanda Sigma via eDP (Embedded DisplayPort) interface, delivering excellent visual quality with 1024×600 resolution and full viewing angle support. The multi-touch panel features 6H surface hardness for scratch resistance and a fully...

SKU: DF-DFR0678

This 7" TFT touchscreen connects directly to the Raspberry Pi via the DSI display interface, delivering 800×480 resolution with capacitive 5-point touch input. The display is powered entirely from the Raspberry Pi — no external power supply required. Mounting holes on the back of the screen allo...

SKU: WS-24484

The Waveshare 10.1" Wide Colour Gamut Capacitive Touch Display delivers vibrant visuals with an NTSC 82% colour gamut IPS panel at 1280×800 resolution and 178° viewing angles. The optically bonded toughened glass touch panel (6H hardness) supports up to 10-point capacitive touch, while the alumin...

SKU: WS-25269 · MPN: 25269

This 7" IPS capacitive touchscreen from Waveshare connects to the Raspberry Pi via the DSI interface for a driver-free, plug-and-play experience. Featuring 800×480 resolution, 5-point multi-touch on toughened glass, and a 170° wide viewing angle, it delivers responsive touch interaction with clea...

SKU: AF-3008

Short female headers designed for tight spaces where standard-height headers won't fit. At just 5mm tall (compared to the standard 8mm), these low-profile headers are ideal for compact builds and slim assemblies. Each header strip is 36 pins long with standard 0.1" (2.54mm) pitch, compatible wit...

SKU: WS-29318 · MPN: 29318

A 3.5" IPS display module with 320×480 resolution, 262K colours, and a 2-point capacitive touchscreen. The ST7796S display driver communicates over SPI while the FT6336U touch controller uses I2C, keeping wiring simple. An onboard voltage translator supports both 3.3 V and 5 V logic levels. Comp...

SKU: DF-FIT0551

This 7" IPS touch display connects to the LattePanda Alpha and LattePanda Delta via eDP (Embedded DisplayPort) interface. With 1024×600 resolution, 178° viewing angle, and high colour saturation, it delivers excellent visuals for HMI and portable projects. The fully laminated, dust-proof design ...

SKU: WS-25270

A 7-inch IPS capacitive touchscreen display with a DSI interface, designed for Raspberry Pi. Features 800×480 resolution, 170° wide viewing angle, and 5-point touch with a toughened glass panel (6H hardness). Available with an optional ABS case for Pi 4B. Driver-free on Raspberry Pi OS with full...

SKU: WS-30326 · MPN: 30326

The 8" DSI IPS Touch Display delivers a crisp 800×1280 resolution with 10-point capacitive touch, optical bonding, and toughened glass for a durable, responsive interface. The IPS panel provides vivid colours and wide 178° viewing angles. With the driver circuit integrated into a flexible FPC ca...

SKU: SF-BOB-10124

This is a breakout board for the SP3485 RS-485 transceiver IC, which will convert a UART serial stream to RS-485. The SP3485 is a half-duplex transceiver, so it can only communicate one way at a time, but it can reach transmission speeds of up to 10Mbps. This board requires a very low amount o...

SKU: AF-1662

Streeeeetch your resistive touch-screen's reach with a 20cm extension cord. This is a great accessory for our resistive touch screen controller breakouts. Plug your 4-pin 1mm pitch FPC into the socket end and the other end into your controller board. Pretty nice! The socket connector on the cable...

SKU: AF-6359 · MPN: ADA6359

This breakout lets you add an ideal diode to a higher-current DC power path without the usual forward voltage drop of a standard diode. It is designed for 3~23V DC supplies and up to 5A, using the LM73100's back-to-back FETs to keep current flowing in one direction while wasting far less power as...