DFRobot
11.6 Inch 1920x1080 FHD eDP Touch Display for LattePanda Mu / Sigma / 3 Delta / 2 Alpha
· MPN: FIT0955
An 11.6-inch 1920×1080 IPS touch display that connects directly to LattePanda single-board computers via eDP (Embedded DisplayPort). The ultra-thin, narrow-b...
Get notified when back in stock
An 11.6-inch 1920×1080 IPS touch display that connects directly to LattePanda single-board computers via eDP (Embedded DisplayPort). The ultra-thin, narrow-bezel design and multi-touch input make it well suited for portable projects, kiosks, and human-machine interface (HMI) applications.
The eDP interface provides a dedicated, high-bandwidth video connection — no HDMI adapter needed. Touch input uses a separate I2C ribbon cable. The included cable pack covers LattePanda Mu, Sigma, 3 Delta, and 2 Alpha boards.
Key Features
- 1920×1080 Full HD IPS – Vivid colours and wide viewing angles
- Multi-Touch – Capacitive touch for intuitive interaction
- eDP Interface – Direct connection to LattePanda boards, no adapter required
- Ultra-Thin, Narrow Bezel – Compact form factor for embedded installations
- 350 cd/m² Brightness – Bright enough for indoor use
Specifications
- Screen Size – 11.6 inches
- Resolution – 1920×1080
- Panel Type – IPS, full-view
- Colour Gamut – 68% (CIE 1931)
- Pixel Pitch – 0.1335mm × 0.1335mm
- Display Area – 256.32mm × 144.18mm
- Backlight – LED, 350 cd/m² max
- Interface – eDP (video) + I2C (touch)
- OS Support – Windows, Linux
- Operating Temperature – −10°C to 60°C
- Storage Temperature – −20°C to 70°C
- Dimensions – 267mm × 159mm × 8.8mm
- Weight – 431g (bare screen)
Compatibility
- LattePanda Mu
- LattePanda Sigma
- LattePanda 3 Delta
- LattePanda 2 Alpha
- LattePanda 2 Delta
Package Contents
- 1× 11.6-inch eDP touch display
- 1× 30cm 40P-to-30P 0.5mm coaxial eDP cable (for Mu / Sigma)
- 2× 34cm opposite-side touch cables (for Sigma)
- 1× 34cm same-side touch cable (for Mu)
- 1× 22cm eDP FPC cable (for 3 Delta / 2 Alpha)
- 2× 21cm opposite-side touch cables (for 3 Delta / 2 Alpha)
Jargon buster
Plain-language definitions for the technical terms used above.
- DisplayPort
- A digital display interface used to connect monitors and other video displays. It matters because the supported DisplayPort version affects display resolution, refresh rate and monitor compatibility.
- eDP
- Embedded DisplayPort (eDP) is an internal display interface used to connect a computer board directly to a built-in panel rather than an external monitor. When a display uses eDP, it requires a host board with a matching eDP connector and support, and will not plug into a standard external output such as HDMI.
- FPC
- FPC stands for flexible printed circuit, a thin flat flexible cable or connector style often used where space is tight or some movement is needed, commonly for displays, cameras and other high-density connections. Connecting to an FPC connector generally needs a matching cable with the correct pin count, pitch and contact orientation.
- HDMI
- HDMI is a common digital video and audio connection used by computers, media players, and many displays. If a display kit has HDMI input, it is usually much easier to test with a single-board computer because it can act like a normal monitor.
- HMI
- HMI stands for Human-Machine Interface, meaning the screen, buttons or controls a person uses to interact with a device. Describing something as suited to HMI use suggests it is intended for user-facing applications such as control panels, dashboards or instrument displays.
- I2C
- I2C is a two-wire communication bus used by many sensors and small modules. It matters because several I2C devices can share the same two wires, but each device needs a compatible address and your controller must support I2C.
- IPS
- IPS is a type of LCD panel that keeps colours and contrast more consistent when viewed from an angle. This matters for small displays that may be mounted in a dashboard, handheld project, or enclosure where the viewer is not always looking straight on.
- LED
- A light-emitting diode (LED) is a small electronic component that emits light when current flows through it in the correct direction. Because it only conducts one way, its polarity matters, and a through-hole LED must be soldered the correct way around to light up.
- Multi-touch
- Multi-touch means the touchscreen can detect more than one finger contact at the same time. This matters for interfaces that use gestures such as pinch-to-zoom, two-finger scrolling, or on-screen controls used together.
Find this product in
Displays & Screens
Supplier page — dfrobot.com
Supplier Description · 1.6 MB · Click any page to view full size
Related Tutorials
Free guides on learn.littlebird.com.au
