All Products

SKU: AF-1097

A simple 4-channel 315 MHz RF receiver module with toggle-type output. No programming, configuration, or microcontroller needed — just power it with ~5V DC and pair it with a matching RF keyfob remote. Each of the four buttons toggles its corresponding output pin on and off. The toggle (T4) type...

SKU: SF-PRT-21328 · MPN: PRT-21328

This 10-position right-angle terminal block header is made for secure, pluggable wire-to-board connections on a PCB. Solder it directly to your board and use it as the receptacle for a removable screw terminal block.It is well suited to I/O signals and power lines that may need to be disconnected...

SKU: DF-FIT0893 · MPN: FIT0893

This compact push-in wire connector turns one input connection into three output connections, making it a handy little power distribution tool for low-voltage DC wiring.The internal conductive spring clamp is made from nickel-coated steel for a tight, anti-corrosion grip that is designed to resis...

SKU: LB-LS4650

This flat, dense PCB holder is designed to keep your circuit board steady while you work. Its low-profile vise style lets your hands rest directly on the work table, making it easier to steady yourself during precise soldering and probing.A thick metal plate helps keep the holder from moving arou...

SKU: DF-DFR0866

The 6V 2-Position 3-Way Air Valve is a solenoid-driven pneumatic valve for controlling air flow direction in pneumatic systems. Like a relay, it features three interfaces: a common port (COM), a normally open port (NO), and a normally closed port (NC). Powering the valve on or off determines whic...

SKU: SF-TOL-18471 · MPN: TOL-18471

These metric threaded inserts are handy for creating strong, reusable fixing points in jigs, fixtures, wasteboards and other work-holding setups.Install a few in strategic locations to clamp down material, or set them out in a grid pattern to turn a wasteboard into a threaded table. Installation ...

SKU: SF-PRT-11475

A robust 6-pin GX16 aviation-style connector set including both the panel-mount jack and mating plug. The threaded locking ring screws onto the panel connector, creating a secure connection that won't pull apart — ideal for signal or power wiring in enclosures. Key Features Locking Connection ...

SKU: AF-1375

This breakout board is the simplest way to create a project with a single "toggle" capacitive touch sensor. No microcontroller is required here - just power with 1.8 to 5.5VDC and touch the pad to activate the sensor.This sensor is a toggle output type: touch-on then touch-off. That means that...

SKU: AF-5472

Why are bananas never lonely? Because they hang around in bunches!A lot of power supplies, multimeters, and other benchtop equipment use standard 4mm banana plugs to connect this-to-that. When you need more, we now stock them! These are handy stackable and retractable Banana P...

SKU: AF-2458

Doesn't this fixture clamp look like a character in a Pixar movie?  If you just drew two little eyes on it then you could just imagine it hopping around on nifty, adorable little adventures that are heartwarming and...sorry, we got carried away. This fixture clamp is a great ...

SKU: AF-4117

A flexible LED strip encased in translucent silicone rubber that produces a smooth, neon-like glow in purple. Unlike traditional neon, it requires no special transformers or glass tubing — just connect 9–12 V DC and it lights up. The silicone diffuser creates an even, continuous glow rather than ...

SKU: WS-31284 · MPN: 31282

Built around the ESP32-S3 dual-core processor, this industrial relay module brings local control, networking and edge automation into one DIN-rail friendly unit. It combines 8 relay outputs, 8 digital inputs, isolated CAN, Ethernet, Wi-Fi and Bluetooth for control panels, robotics, smart factorie...

SKU: DF-FIT0225

A comprehensive mounting kit containing a variety of M3 nylon and copper standoffs, screws, and nuts — all organised in an adjustable 24-compartment parts box. Everything you need to mount circuit boards, build robot frames, and secure components in your projects. Key Features Mixed Materials ...

SKU: AF-4168

This fibre optic light source is a high-powered white LED cluster designed to feed light into fibre optic tubes and light pipes. It produces a bright, cool white output at up to 1 watt, with the metal body acting as a built-in heat sink for reliable continuous operation. Installation is simple —...

SKU: AF-4255

Brass heat-set inserts provide strong, reusable threaded connections in 3D-printed and injection-moulded plastic parts. Each insert has a knurled outer surface that grips the surrounding plastic when pressed in with a heated soldering iron, and an M3 internal thread that accepts standard machine ...

SKU: AF-3306

Fire up your engines because these are the hot-rods of toggle switches! Equipped with an aerodynamic blue protective casing, and a diffused blue LED at the tip of the switch, this Blue LED Toggle Switch is sure to add some flair (and flare!) to your project.Often seen on control pa...

SKU: DF-SEN0288

A non-contact AC current sensor with a clamp-on transformer probe, capable of measuring 0–10 A AC. Simply clamp the probe around an AC line and connect the 3.5 mm plug to the signal conversion module — no wire cutting or circuit modification required. The Gravity analogue interface outputs a 0.2...

SKU: WS-25029

Industrial Grade CAN/CAN FD Bus Data Analyzer, USB To CAN FD Adapter, CAN/CAN FD Bus Communication Interface Card, CAN/CAN FD Protocol Data Analyzer Industrial Grade CAN FD Bus Adapter Supports high-speed CAN FD and CAN2.0A/B data communication   Features at a glance The USB-CAN-FD is a...

SKU: AF-1443

A 16mm illuminated pushbutton with a built-in green LED and latching on/off action. Press once to switch on, press again to switch off — ideal for power switches, mode selectors, and control panels. The LED is wired independently from the switch contacts, giving you full control over when the li...

SKU: AF-1477

A 16mm illuminated pushbutton with a built-in blue LED and momentary action. The switch contacts connect only while the button is held down and return to their normally-open state when released — perfect for trigger inputs, action buttons, and interactive controls. The LED is wired independently...