All Products

SKU: AF-3346

The Adafruit I2S 3W Stereo Speaker Bonnet adds high-quality digital audio output to any Raspberry Pi with a 2×20 GPIO header. Using the I2S digital sound standard, audio data goes directly to the onboard Class D amplifier — delivering crisp, static-free stereo sound without relying on the Pi's he...

SKU: AF-5770

The Adafruit I2S Amplifier BFF is a compact add-on that brings high-quality 3W audio to any QT Py or Xiao development board. Featuring a MAX98357 Class D amplifier, it delivers crisp I2S digital audio using just three GPIO pins (A0, A1, A2) that don't conflict with I2C, UART, or SPI. Designed as...

SKU: AF-3006

The Adafruit MAX98357A I2S Class D Amplifier Breakout is an all-in-one digital audio solution that decodes I2S audio and amplifies it directly to a speaker — no separate DAC required. Delivering up to 3.2W into a 4Ω speaker, it's a compact and efficient way to add amplified sound to your Raspberr...

SKU: PI-COM1600

A 3-inch (77.8 mm) full-range speaker rated at 5 W with a 4 Ω impedance. Compact enough to embed in custom enclosures, arcade cabinets, internet radio builds, and other audio projects. Key Features 5 W Power – Solid output for its size 4 Ω Impedance – Compatible with most Class D amplifier bo...

SKU: AF-1752

A compact Class D stereo amplifier breakout based on the Maxim MAX9744. It drives two channels of 4–8 Ω speakers at up to 20 W each, powered from 4.5–14 V DC. With up to 93% efficiency, it runs cool without heatsinks — ideal for portable and battery-powered audio projects. Volume can be controll...

SKU: LB-LS2202

This compact Bluetooth amplifier board provides wireless audio playback with 5W per channel (10W total) output via dual PAM8403 amplifier chips. Stream music wirelessly from any Bluetooth 5.0 compatible device directly to your speakers. The small form factor and 3mm mounting holes make it easy t...

SKU: DF-DFR0720

This is a small size and cost-effective Bluetooth 4.2 Audio Receiver module with dual 5W power amplifier circuits. It supports auto-reconnect and can be powered by micro USB or 3.7V lithium battery. The module can be turned into a stereo Bluetooth speaker when connected with two speakers. Also, y...

SKU: AF-1313

Listen up! This 3" diameter speaker cone is the perfect addition to any audio project where you need an 8 ohm impedance and 1W or less of power. We particularly like this cone as it has 4 handy mounting tabs 60mm apart.Works great with our Wave shield or class D amplifier board.

SKU: AF-6421 · MPN: ADA6421

The Adafruit PCM5122 I2S DAC delivers excellent stereo line-level audio with 112dB SNR and -93dB THD. Out of the box it works in hardware mode — just pipe I2S audio in with no MCLK or configuration needed. For advanced control, switch to I2C or SPI mode to access software volume, EQ, filtering, a...

SKU: AF-1732

A high-power 4" (102mm) full-range speaker rated at 20W continuous with 4Ω impedance. The wide frequency response of 60Hz–24kHz delivers clear audio across the full spectrum, making it suitable for projects where you need room-filling sound. Originally designed for automotive use, this speaker w...

SKU: EC-ASVS1053MP

An Arduino-compatible MP3 shield based on the VS1053B audio codec from VLSI. It decodes all major audio formats — including MP3, OGG Vorbis, AAC, WMA, FLAC, WAV, and MIDI — and can record in Ogg Vorbis, IMA ADPCM, and 16-bit PCM from the onboard microphone or line-in input. With an SD card slot ...

SKU: SF-KIT-28374 · MPN: KIT-28374

Add 16-bit stereo audio output to a Teensy project with this DIY audio adapter kit built around the PT8211 digital-to-analogue converter (DAC). It is designed as a clean, high-fidelity sound source for audio-based builds using the Teensy Audio Library.The adapter provides a true stereo, line-leve...

SKU: AF-6251 · MPN: ADA6251

The Adafruit PCM5100 I2S DAC converts digital I2S audio into clean, high-quality stereo line-level output through a 3.5mm jack. With 100dB signal-to-noise ratio and no MCLK or I2C configuration required, simply pipe I2S data in and get great-sounding analogue audio out. The PCM5100 accepts 16, 2...

SKU: AF-2133

The Adafruit Audio FX Sound Board is a standalone audio trigger that plays WAV and OGG Vorbis files — no Arduino or programming required. Simply drag and drop sound files over USB, wire up buttons to the trigger pins, and you're ready to go. With 2 MB of built-in flash storage, it holds a few min...

SKU: AF-4445

A compact 2.8" × 1.2" enclosed mono speaker delivering clear audio output at 3W and 4 ohm impedance. The sealed enclosure provides improved sound quality and volume compared to bare speaker drivers of a similar size. This speaker comes with plain bare wires (no connector), making it easy to sold...

SKU: AF-5647

The Adafruit STEMMA Audio Amp is a compact mono Class D amplifier based on the PAM8302 chip, delivering up to 2.5W into 4 Ω speakers from a 2.0–5.5V DC supply. With over 90% efficiency at half a watt into 8 Ω, it's ideal for portable and battery-powered audio projects. This plug-and-play STEMMA ...

SKU: DF-FIT0404

A 1-metre Y-cable that splits a 3.5 mm stereo signal into two RCA connectors, making it easy to connect phones, tablets, laptops, or media players to home audio systems, amplifiers, and receivers. Most portable devices output audio through a 3.5 mm headphone jack, while home hi-fi equipment typi...

SKU: EC-CCB25011M

This is a bluetooth audio receiver module with usb and TF card decoding. Usually it’s can be used as a mp3 player, just a TF card and DC 5V power supply. It has five buttons for you to change mode or achieve other audio control like volume adjustment. It has two modes : music mode and bluetooth d...

SKU: AF-2911

A 1/4" (6.35 mm) stereo plug with screw terminal connections — no soldering required. Simply insert stranded or solid-core wire into the terminal block and tighten with a small screwdriver to create custom audio wiring in seconds. The terminal block design makes it easy to prototype, test, and r...

SKU: AF-2130

The Adafruit Mono 2.5W Class D Audio Amplifier delivers powerful sound from a tiny package. Based on the PAM8302 chip, it drives 4–8 ohm speakers at up to 2.5 W with over 90% efficiency — making it ideal for portable and battery-powered audio projects. A significant upgrade over basic LM386-based...