All Products

SKU: KS-KS0428

The Keyestudio Mini Tank Robot V2.0 is a tracked robotics platform for learning Arduino programming, sensor integration, and smart robot construction. It supports obstacle avoidance, line following, IR remote control, Bluetooth app control, ultrasonic following, and facial emoticon display — all ...

SKU: DF-DRI0039

INTRODUCTION The latest quad motor driver shield for Arduino, compatible with 5V/3.3V Arduino controller, can control up to four DC motors with 8 pins at the same time. The shield supports PWM speed control and polarity control. The driver shield includes two TB6612FNG ...

SKU: SF-ROB-16328

The SparkFun Auto pHAT is an all-in-one robotics add-on for the Raspberry Pi. It drives up to two DC motors (with optional encoder support) and four servo motors, all controlled over I2C — leaving your Pi's GPIO pins free for other uses. A Qwiic connector is included for easy expansion. The boar...

SKU: MB-12040

This encoder motor is capable of driving two DC motors or one encoder motor. It has 16 pins, allowing you to connect with MegaPi by simply plugging in. The motor driver IC on the board is TB6612, which is a high efficiency MOSFET driver with low heat dissipation. Overcurrent protection included t...

SKU: DF-DRI0023

INTRODUCTION Do you want to do some projects with stepper motors such as a drafting instrument, a 3D printer, an auto curtain......? As we all know, regular stepper motors are hard to drive, but with this stepper motor shield, you can easily drive 2 stepper motors vi...

SKU: SF-ROB-15451

The SparkFun Qwiic Motor Driver takes all the great features of the Serial Controlled Motor Driver (SCMD) and miniaturizes them, adding Qwiic ports for plug and play functionality. Boasting the same 4245 PSOC and 2-channel motor ports as the SCMD, the SparkFun Qwiic Motor Driver is designed to co...

SKU: SF-COM-30416 · MPN: COM-30416

Control higher-power loads from a microcontroller over I2C with this Qwiic relay board. It is built around the Omron G6K-2F-Y DC3 dual-pole/dual-throw relay, letting a low-voltage logic system switch loads up to 1A at 30VDC or 0.3A at 125VAC at 40°C.The board offers both software and hardware con...

SKU: SF-ROB-12779

The EasyDriver is a simple to use stepper motor driver, compatible with anything that can output a digital 0 to 5V pulse (or 0 to 3.3V pulse if you solder SJ2 closed on the EasyDriver). The EasyDriver requires a 6V to 30V supply to power the motor and can power any voltage of stepper motor. The E...

SKU: SF-DEV-15801

The SparkFun Power Delivery Board uses the STMicroelectronics STUSB4500 controller to negotiate USB Power Delivery (PD) contracts with compatible chargers and adapters. Instead of being limited to 5 V from a standard USB connection, this board can request higher voltages — typically 5–20 V and up...

SKU: SF-ROB-16836

The SparkFun ProDriver makes it easy to start developing with the TC78H670FTG bipolar stepper motor driver from Toshiba! Latch terminals provide instant solder-less connections to every feature offered. Use our extensive Arduino Library with 10 examples, and you can quickly explore the many featu...

SKU: SF-ROB-25167 · MPN: ROB-25167

The SparkFun Mini Stepper Motor Driver empowers you to control bipolar stepper motors with ease and precision. This compact driver, measuring just 0.6in. by 0.8in. with breadboard-friendly 0.1in. pin spacing, shines in space-constrained projects and prototyping applications. Getting started is a ...

SKU: SF-COM-09479

The LN298 is a high voltage, high current, dual full-bridge motor driver designed to accept standard TTL logic levels and drive inductive loads such as relays, solenoids, DC and stepping motors. Comes in a staggered, 15-lead Multiwatt package. Check below for a breakout board. Features: O...

SKU: PR-PIM617

A compact motor driver add-on for the Raspberry Pi Pico, based on the DRV8833 dual H-bridge. Solders directly to the back of a Pico and provides two JST-ZH connectors for micro metal gearmotors. Also includes a user button and a Qw/ST (Qwiic/STEMMA QT) connector for attaching I²C breakout boards....

SKU: PL-3753

The Pololu Dual G2 High-Power Motor Driver 24v14 is a Raspberry Pi expansion board that can independently control two brushed DC motors at up to 14A continuous per channel. It mounts directly onto the Pi's 40-pin GPIO header in the HAT form factor and includes an integrated 5V 2.5A step-down regu...

SKU: SF-COM-00315

The SN754410 is a quad half H-bridge motor driver IC capable of driving DC motors, stepper motors, and other inductive loads. It accepts TTL 5V logic inputs and can drive motors from 4.5V to 36V at up to 1A continuous output current per channel. A pin-compatible replacement for the popular L293D...

SKU: SF-DEV-14129

The Ardumoto Shield is a dual-motor controller for Arduino based on the L298 H-bridge. It can drive two DC motors at up to 2A per channel, making it an excellent platform for RC vehicles and small autonomous robots. The board draws power from the Arduino's Vin line and includes blue and yellow L...

SKU: SF-ROB-14538

The SparkFun Haptic Motor Driver breakout board features the Texas Instruments DRV2605L, providing an easy way to add tactile feedback to your projects. Connect a vibration motor, communicate over I2C from any Arduino-compatible microcontroller, and trigger a library of haptic effects. The DRV26...

SKU: DF-DFR0305

The Romeo BLE is an all-in-one Arduino-compatible robot control board from DFRobot with integrated Bluetooth 4.0. It combines an ATmega328P microcontroller, a dual-channel DC motor driver (2 A max), and a TI CC2540 BLE chip in a single board — letting you build and wirelessly control robots witho...

SKU: SF-KIT-14180

Robots are fun, and Arduinos are easy. So wouldn’t it be nice if there were a kit that included everything you need to get your Arduino device set up to control a simple two-motor-circuit buddy? The SparkFun Ardumoto Shield Kit is perfect for any robot enthusiast and includes an Ardumoto Shield, ...

SKU: DF-DRI0017

The DFRobot 2×2A Motor Shield uses the L298P dual full-bridge driver chip to control two 4.8–35 V DC motors at up to 2 A per channel. It stacks directly onto Arduino Uno and Arduino Mega boards, using PWM pins 10 and 11 for speed control and digital pins 12 and 13 for enable/disable. The shield ...