All Products

SKU: WS-19297 · MPN: 19297

This 5G omni-directional antenna provides 18dBi gain across a wide 600–6000MHz frequency range, covering 5G, 4G, 3G, and GNSS bands. The omni-directional radiation pattern delivers consistent signal quality in all directions without needing to orient the antenna toward a specific tower. It conne...

SKU: SF-CAB-22037

A 25cm RP-SMA male-to-female extension cable with RG174 coaxial housing. Ideal for repositioning an antenna to the outside of an enclosure while keeping your electronics neatly inside, this cable provides a reliable RF connection for GPS, cellular, Wi-Fi, and other RF applications. The RP-SMA (R...

SKU: SF-WRL-17389

This is the Antenna Kit for the Raspberry Pi 4 Compute Module wireless variants. The “duck” style antenna adds range to the wireless radio on the wireless enabled Compute Modules. Something quite desirable if you’re working in industrial environments or other places a Compute Module would be u...

SKU: AF-746

The Adafruit Ultimate GPS Breakout (Version 3) is a high-performance GPS module built around the MTK3339 chipset. With 66 channels, -165 dBm tracking sensitivity, and up to 10 Hz position updates, it delivers accurate and responsive location data for a wide range of projects. Version 3 introduce...

SKU: AF-2460

An ultra-compact passive GPS antenna measuring just 9 × 9 × 6.5 mm, with a 50 mm uFL cable. Ideal for space-constrained projects where a full-size antenna won't fit. Key Features Tiny Form Factor – Only 9 × 9 × 6.5 mm uFL Connector – Standard uFL interface for easy connection to GPS modules ...

SKU: AF-1661

uFL connectors are very small surface-mount parts used when an external RF antena is desired but a big bulky SMA connector takes up too much space. We use this part on our GPS and WiFi boards, they're great! Chances are your antenna doesn't use uFL as the main connector, in which case you should ...

SKU: SF-CAB-21740

This is a 10 meter (33 ft) long Male TNC to Male SMA cable with injection molded stress-relief boots. This is an excellent cable for connecting one of our RTK development boards to a high quality 'UFO' style GNSS antenna. It's long enough to connect to an antenna on the roof to one of our GNSS re...

SKU: DF-FIT0957 · MPN: FIT0957

The IPEX4 to SMA Female Connector Cable is a 200 mm adapter designed for single-board computers equipped with an IPEX4 (MHF4) wireless interface, including the LattePanda 3 Delta, LattePanda 2 Alpha, and LattePanda 2 Delta. It converts the onboard IPEX4 connector to a standard SMA female port (ex...

SKU: EC-WAW24040A

A 2.4 GHz WiFi antenna with 4 dBi gain and an IPEX (MHF) connector, enclosed in a protective cover. It connects directly to boards with an IPEX/U.FL socket, providing improved wireless range over built-in PCB antennas. Key Features 4 dBi Gain – Higher gain than standard stub antennas for exten...

SKU: DF-FIT0677

An aluminium alloy heatsink enclosure for the LattePanda V1 single board computer. The all-metal construction with black anodised and sandblasted finish provides excellent durability and a professional appearance. The bottom-mounted aluminium heatsink module with 12mm fins provides passive coolin...

SKU: SF-CAB-22038

This is a basic RP-SMA (Reverse Polarity Sub-Miniature A) male to female connector cable. Each cable is 10M (393.7in.) long with RG58 housing. The RP-SMA connectors at each end are small enough for most consumer GPS, cellular, and other RF applications and they use a threaded housing to create st...

SKU: WS-21705

A 5G cellular HAT for Raspberry Pi featuring the Quectel RM500U-CN module with quad antenna support. This board brings high-speed 5G, 4G LTE-A, and 3G connectivity to your Raspberry Pi, Jetson Nano, or PC — supporting both 5G NSA and SA networking modes. The HAT connects via USB 3.1 (USB 2.0 com...

SKU: AF-3060

The Adafruit ATWINC1500 WiFi Breakout with uFL Connector adds 802.11b/g/n WiFi connectivity to your Arduino or other microcontroller project over SPI. This version features a uFL antenna connector instead of an onboard antenna, allowing you to use an external antenna for improved range or placeme...

SKU: AF-960

Give your Ultimate GPS V3 a boost with this external active antenna. This GPS antenna draws about 10mA and will give you an additional 28 dB of gain. It's got a 5 meter long cable so it will easily reach wherever you need it to. The antenna is magnetic so it will stick to the top of a car or truc...

SKU: DF-FIT0833

This gold-plated IPEX to SMA female connector has passed 48 hours salt spray test, which is durable and not easy to rust.It adopts RG1.13 wire material and high-density shielding layer, soft and firm, fold-resistant and durable, with fast and stable data transmission.These IPEX to SMA Female Cabl...

SKU: SF-WRL-09232

This is an adapter that converts an RP-SMA board to an SMA antenna. The adapter will connect to any of our 2.4GHz wireless boards (Bluetooth, Nordic, or XBee) or interface cables and will allow you to use an antenna/cable with an SMA connection. You should not need this adapter with any of ...

SKU: SF-GPS-24114 · MPN: GPS-24114

The SparkFun GNSS L1/L5 Breakout - NEO-F10N, SMA is a standard precision GNSS board with meter-level positional accuracy. The NEO-F10N uses the L1/L5 bands instead of the more commonly seen L1/L2 bands. Utilizing the L5 band, the NEO-F10N delivers improved performance under challenging urban envi...

SKU: SF-GPS-00177

This embedded GPS antenna with built-in LNA (Low Noise Amplifier) is designed for small, mobile applications. Its compact, unpackaged form factor makes it ideal for creating truly small GPS prototypes. Comes with a 5-inch cable terminated with a standard male SMA connector. Works well out of the...

SKU: SF-CEL-15054

This high-gain duck antenna is designed for LTE devices that operate in the 690-960MHz and 1710-2690 MHz bands. Combined with an SMA to U.FL Adapter, this duck antenna works perfectly with our LTE Cat M1/NB-IoT Shield.

SKU: DF-FIT0454

This is a small built-in spring GSM antenna with IPX connector. Its working frequency is 900/1800 MHz which meets most requirements of GSM applications. Its very compact size makes it easy to carry and use. Compatible With: SIM 908 GPS/GPRS/GSM Shield For Arduino SIM800H GPRS IO...