All Products

SKU: AF-1821 · MPN: 1821

This 1.2″ 8×8 LED Matrix features 64 bright white LEDs arranged in a square grid, perfect for building scrolling signs, simple animations, or small pixel displays. The compact package plugs directly into a breadboard with 0.1″ pin spacing — eight pins on each side. The matrix requires 1:8 multip...

SKU: AF-1820 · MPN: 1820

This 1.2″ 8×8 LED Matrix features 64 pure green LEDs arranged in a square grid, perfect for building scrolling signs, simple animations, or small pixel displays. The compact package plugs directly into a breadboard with 0.1″ pin spacing — eight pins on each side. The matrix requires 1:8 multiple...

SKU: AF-1819 · MPN: 1819

This 1.2″ 8×8 LED Matrix features 64 yellow LEDs arranged in a square grid, perfect for building scrolling signs, simple animations, or small pixel displays. The compact package plugs directly into a breadboard with 0.1″ pin spacing — eight pins on each side. The matrix requires 1:8 multiplex dr...

SKU: AF-1818 · MPN: 1818

This 1.2″ 8×8 LED Matrix features 64 amber LEDs arranged in a square grid, perfect for building scrolling signs, simple animations, or small pixel displays. The compact package plugs directly into a breadboard with 0.1″ pin spacing — eight pins on each side. The matrix requires 1:8 multiplex dri...

SKU: AF-1817 · MPN: 1817

This 1.2″ 8×8 LED Matrix features 64 blue LEDs arranged in a square grid, perfect for building scrolling signs, simple animations, or small pixel displays. The compact package plugs directly into a breadboard with 0.1″ pin spacing — eight pins on each side. The matrix requires 1:8 multiplex driv...

SKU: AF-1374 · MPN: 1374

This breakout board is the simplest way to create a project with a single "momentary" capacitive touch sensor. No microcontroller is required here - just power with 1.8 to 5.5VDC and touch the pad to activate the sensor.When a capacitive load is detected (e.g. a person touches the sensor-pad area...

SKU: AF-1375 · MPN: 1375

This breakout board is the simplest way to create a project with a single "toggle" capacitive touch sensor. No microcontroller is required here - just power with 1.8 to 5.5VDC and touch the pad to activate the sensor.This sensor is a toggle output type: touch-on then touch-off. That means that...

SKU: AF-1362 · MPN: 1362

This breakout board is the simplest way to create a project with mutiple capacitive touch sensors. No microcontroller is required here - just power with 1.8 to 5.5VDC and connect up to 5 conductive pads to the 5 left-hand pins. When a capacitive load is detected (e.g. a person touches one of the ...

SKU: AF-1079 · MPN: 1079

This miniature 8×8 LED matrix packs 64 bright white LEDs into a compact 0.8″ (20 mm) square package. The 16 pins (8 per side) are on standard 0.1″ spacing, so the module plugs directly into a breadboard with room to spare for wiring. The matrix requires 1:8 multiplex driving — either use shift r...

SKU: SF-SEN-18367

A sealed, waterproof DS18B20 digital temperature probe for precise measurements in wet or harsh environments. The sensor communicates over a 1-Wire interface, requiring just one data pin (plus ground) to connect to your microcontroller. It can even be parasitically powered from the data line. Ea...

SKU: AF-5613 · MPN: 5613

The EYESPI Breakout Board brings the 18-pin EYESPI FPC connector out to standard 0.1"-spaced headers, making it easy to breadboard and prototype with EYESPI-compatible displays. Each pin is clearly labelled, and for most display projects you only need the left half of the header for power and SPI...

SKU: AF-865 · MPN: 865

A red 4-digit 7-segment clock display with 0.56″ (14.2 mm) digit height. Each digit includes a decimal point, plus a centre colon for time-based displays. Bright at 18 mcd, these displays are easy to read and can be dimmed by reducing drive current to save power. This is a raw multiplexed common...

SKU: AF-2010 · MPN: 2010

Note: The Pro Trinket's bit-bang USB technique is a legacy approach that may not work reliably with modern operating systems. For new projects, consider an ItsyBitsy or Metro Mini board with native USB support at a comparable price. The Adafruit Pro Trinket 3V is a compact ATmega328P-based mic...

SKU: AF-2000 · MPN: 2000

Note: The Pro Trinket's bit-bang USB technique is a legacy approach that may not work reliably with modern operating systems. For new projects, consider an ItsyBitsy or Metro Mini board with native USB support at a comparable price. The Adafruit Pro Trinket 5V is a compact ATmega328P-based mic...

SKU: SF-DEV-17745

The SparkFun Thing Plus - RP2040 is a low-cost, high performance board with flexible digital interfaces featuring the Raspberry Pi Foundation's RP2040 microcontroller. Besides the Thing Plus or Feather footprint (with 18 GPIO pins), the board also includes an SD card slot, 16MB (128Mbit) flash...

SKU: WS-26379

Introducing the PICO-CAM-A: RP2040 Camera Development Board Unlock the potential of image information capture with our PICO-CAM-A, a cost-effective, high-performance MCU camera board based on the Raspberry Pi RP2040. Tailored for various application scenarios, this development board boasts a...

SKU: SF-WIG-13720

Make some noise with your next project! The MP3 Trigger board is built to make MP3 sound integration easier than ever. The board has 18 external trigger pins that will directly trigger pre-selected MP3 tracks, and a full-duplex serial control port that provides full transport control, remote trig...

SKU: SF-DEV-20360

The Teensy 4.1 is the newest iteration of the astoundingly popular development platform that features an ARM Cortex-M7 processor at 600MHz, with a NXP iMXRT1062 chip, four times larger flash memory than the 4.0, and two new locations to optionally add more memory. The Teensy 4.1 is the same si...

SKU: SF-DEV-20359

The Teensy 4.1 is the newest iteration of the astoundingly popular development platform that features an ARM Cortex-M7 processor at 600MHz, with a NXP iMXRT1062 chip, four times larger flash memory than the 4.0, and two new locations to optionally add more memory. The Teensy 4.1 is the same si...

SKU: AF-420 · MPN: 420

A 16×32 RGB LED matrix panel with 512 individually controllable LEDs at 6 mm pitch. Two IDC connectors on the back (input and output) allow panels to be daisy-chained for larger displays. Driven at a 1:8 scan rate using 12 digital pins and a 5V supply. These panels are designed for high-speed pr...