All Products

SKU: EC-AP0500STK

AVRISP2.0 STK500 programmer help you download your codes into your controller or bootloader to your Arduino board, it communicates with PC via USB port, and it works with most of PC & notebook computers.Features It can support a wide range of ATMEL AVR microcontroller. It can works with AVR Studi...

SKU: AF-815

The Adafruit 16-Channel PWM/Servo Driver uses the PCA9685 chip to provide 16 channels of 12-bit PWM output over I2C. With a built-in clock, the driver runs independently — no need to continuously send signals from your microcontroller. Ideal for controlling servos, LEDs, or any PWM-driven device....

SKU: SF-SEN-15103

The Sensirion SPS30 is a compact, high-quality optical particle sensor that uses laser scattering and Sensirion's innovative contamination-resistance technology for superior binning and particle measurement. It measures both mass concentration and particle count across PM1.0, PM2.5, PM4.0, and PM...

SKU: AF-6198 · MPN: ADA6198

A warm-white LED filament shaped as the letter "H", made from COB (chip on board) LEDs — the same technology found in Edison-style LED bulbs. Dozens of micro LED diodes are bonded onto a thin metal backing and coated in silicone, producing a bright, uniform glow from both sides. Lightweight and ...

SKU: AF-6206 · MPN: ADA6206

A warm-white LED filament shaped as the letter "O", made from COB (chip on board) LEDs — the same technology found in Edison-style LED bulbs. Dozens of micro LED diodes are bonded onto a thin metal backing and coated in silicone, producing a bright, uniform glow from both sides. Lightweight and ...

SKU: SF-KIT-28375 · MPN: KIT-28375

Get started with Teensy development using a kit built around the official PJRC Teensyduino Tutorials, parts 1 through 4. It gathers the fundamental electronic components needed for the early lessons, so you can focus on building and learning.The kit is intended as a companion for your Teensy boar...

SKU: AF-6213 · MPN: ADA6213

A warm-white LED filament shaped as the letter "V", made from COB (chip on board) LEDs — the same technology found in Edison-style LED bulbs. Dozens of micro LED diodes are bonded onto a thin metal backing and coated in silicone, producing a bright, uniform glow from both sides. Lightweight and ...

SKU: AF-6215 · MPN: ADA6215

A warm-white LED filament shaped as the letter "X", made from COB (chip on board) LEDs — the same technology found in Edison-style LED bulbs. Dozens of micro LED diodes are bonded onto a thin metal backing and coated in silicone, producing a bright, uniform glow from both sides. Lightweight and ...

SKU: AF-6212 · MPN: ADA6212

A warm-white LED filament shaped as the letter "U", made from COB (chip on board) LEDs — the same technology found in Edison-style LED bulbs. Dozens of micro LED diodes are bonded onto a thin metal backing and coated in silicone, producing a bright, uniform glow from both sides. Lightweight and ...

SKU: AF-6204 · MPN: ADA6204

A warm-white LED filament shaped as the letter "M", made from COB (chip on board) LEDs — the same technology found in Edison-style LED bulbs. Dozens of micro LED diodes are bonded onto a thin metal backing and coated in silicone, producing a bright, uniform glow from both sides. Lightweight and ...

SKU: AF-6216 · MPN: ADA6216

A warm-white LED filament shaped as the letter "Y", made from COB (chip on board) LEDs — the same technology found in Edison-style LED bulbs. Dozens of micro LED diodes are bonded onto a thin metal backing and coated in silicone, producing a bright, uniform glow from both sides. Lightweight and ...

SKU: LB-EAGLED-LED-Y

EagLED yellow sewable LEDs designed for e-textiles and wearable electronics. These Australian-made LEDs come attached in a strip — simply snap them apart and sew into clothing, accessories, or fabric projects using conductive thread. A lower-cost alternative to LilyPad LEDs. Each LED lights up w...

SKU: SF-KIT-15073

The Particle Xenon is a low-cost mesh-enabled development board. With the Nordic nRF52840 SoC you have all the power of an ARM Cortex M4 with OpenThread mesh networking, NFC, plenty of GPIOs, LiPo charging and more. The board is designed to act as a standalone endpoint or repeater in a Particl...

SKU: AF-4565

The Adafruit LSM6DSOX + LIS3MDL FeatherWing is a precision 9 Degree of Freedom (9-DoF) IMU add-on for any Feather board. It combines the LSM6DSOX accelerometer/gyroscope — known for its exceptionally low gyro drift and noise — with the LIS3MDL magnetometer for complete orientation and heading sen...

SKU: MR-MINIMUM

The Minimum Cubelet can accept any amount of data but only outputs the smallest value that it receives. It can be handy for creating an on-off switch for a robot and also for using with a Distance Cubelet to build robots that avoid falling off the edge of a table

SKU: AF-6194 · MPN: ADA6194

A warm-white LED filament shaped as the letter "D", made from COB (chip on board) LEDs — the same technology found in Edison-style LED bulbs. Dozens of micro LED diodes are bonded onto a thin metal backing and coated in silicone, producing a bright, uniform glow from both sides. Lightweight and ...

SKU: AF-6203 · MPN: ADA6203

A warm-white LED filament shaped as the letter "L", made from COB (chip on board) LEDs — the same technology found in Edison-style LED bulbs. Dozens of micro LED diodes are bonded onto a thin metal backing and coated in silicone, producing a bright, uniform glow from both sides. Lightweight and ...