All Products

SKU: SF-KIT-15073

The Particle Xenon is a low-cost mesh-enabled development board. With the Nordic nRF52840 SoC you have all the power of an ARM Cortex M4 with OpenThread mesh networking, NFC, plenty of GPIOs, LiPo charging and more. The board is designed to act as a standalone endpoint or repeater in a Particl...

SKU: WS-24386

Quectel EM060K-GL Module, LTE-A Cat 6 module with M.2 form factor, Global Multi-band GNSS Positioning Quectel EM060K-GL module LTE-A Cat 6 M.2 Module  Industrial-grade module for industrial and commercial applications  Features At A Glance LTE-A Cat 6 module with M.2 form factor Sup...

SKU: AF-5255

The Adafruit LED Glasses Starter Kit includes everything you need to build a complete pair of programmable LED glasses. Pair the 116-LED front panel with the Bluetooth-enabled nRF52840 driver board, snap them onto the included fashion frames, and you're ready to create dazzling wearable light dis...

SKU: SF-KIT-24441 · MPN: KIT-24441

Start prototyping low-power cellular IoT projects with a kit built around Digi XBee Cellular and the Qwiic Connect System. It brings together the core board, cellular module, sensor, SIM, antennas and cables needed to begin collecting data beyond normal Wi-Fi range.The included SparkFun Digi XBee...

SKU: DF-DFR0767-2 · MPN: DFR0767-2

This compact kit provides a networking carrier platform for the Raspberry Pi Compute Module 4 series, suited to embedded routing, gateway and edge networking projects. It is designed for dual-gigabit networking using the CM4 built-in Ethernet interface and a PCI Express 1000BASE-T NIC, offering a...

SKU: WS-30717 · MPN: 30717

Add 4G LTE connectivity and GNSS positioning to your Raspberry Pi with this SIM7600NA-H HAT. It supports LTE Cat-4 data rates (up to 150 Mbps down / 50 Mbps up), phone calls, SMS, and multi-constellation satellite navigation — all controlled via standard AT commands. The HAT connects via the sta...

SKU: DF-DFR1249 · MPN: DFR1249

Add mobile network connectivity to a LattePanda IOTA with this dedicated M.2 4G LTE expansion board. It provides a standard M.2 B-Key slot for installing a compatible cellular module, making it useful where Wi-Fi is unavailable or unreliable.The board connects to the LattePanda IOTA via a direct ...

SKU: DF-TEL0143

A wideband 5G antenna covering 600–6000MHz, compatible with all major cellular frequency bands (5G/4G/3G/2G) as well as Wi-Fi. Features an SMA connector with IPEX4 pigtail for easy connection to 5G modules, routers, and access points. The antenna supports 90° bending for flexible pointing and po...

SKU: SF-CEL-29622 · MPN: CEL-29622

Improve the signal performance of your cellular project by moving the antenna outside the enclosure. This LTE hinged external antenna helps reduce interference from internal electronics, giving your modem a cleaner signal path and a more stable connection.Designed for broad cellular compatibility...

SKU: DF-DFR1083 · MPN: DFR1083

##Introduction The Arduino Portenta C33 is a streamlined module that offers the high performance of the Arduino Portenta family at a lower price point, thanks to optimizations and streamlined features. Ideal to developing cost-effective, real-time applications, the Portenta C33 features the ARM® ...

SKU: SF-WRL-17841

A compact wide-band internal antenna covering 700–2700 MHz, suitable for 4G LTE, LoRa, BLE, and other RF applications. The FPC radiator element connects via a 100mm coaxial cable with an IPEX (u.FL equivalent) connector, and 3M adhesive backing makes it easy to mount inside enclosures and project...

SKU: AF-5432

The Spresense LTE Extension Board adds LTE connectivity to the Spresense main board and carries an onboard antenna and a nanoSIM cardholder. It also extends the interfaces of the Spresense main board with multiple mic inputs, a headphone jack, and a microSD card slot. The Spresense main board and...

SKU: DF-TEL0162 · MPN: TEL0162

##Introduction The SIM7600G-H is an integrated wireless communication module featuring 4G CAT4 (with anuplink speed of 50Mbps and a downlink speed of 150Mbps) and GNSS positioning (supportingGPS, BD, GLONASS). It extensively supports multiple bands, including LTE-FDD, LTE-TDD, WCDMA,and GSM, maki...

SKU: SF-WRL-17732 · MPN: WRL-17732

The Taoglas Steedan MA350 is a low-profile 5-in-1 combination antenna designed for vehicle roofs, outdoor buildings and heavy equipment where drilling through a roof or metal panel is not feasible. Its magnetic base mounts to steel surfaces using ultra-strong neodymium magnets, while a soft foam ...

SKU: SF-WRL-22527

This is an Extremely Efficient, Wide Band, Flexible LTE Antenna with a small footprint. This easy to install durable, flexible polymer antenna operates on greater than 45% efficiency on LTE bands from 698 – 3000MHz. For use in a wide array of applications which need LTE connectivity, including ho...

SKU: AF-4004

Woohoo, it's time for a Particle Mesh party! So why not cater for connectivity with the Particle Mesh Wi-Fi Bundle, a veritable smörgåsbord (yum!) to begin building mesh networking for your IoT project. Particle Mesh means you can create local networks that collect data, share messages, and co...

SKU: SF-CEL-16432 · MPN: CEL-16432

This external cellular antenna is designed for 2G, 3G, 4G and 5G modules and devices, making it a handy choice for LTE and wireless networking builds that need a compact, direct-mount antenna.The hinged design helps with positioning once installed, with rotation available on both the vertical and...

SKU: SF-CEL-15054

This high-gain duck antenna is designed for LTE devices that operate in the 690-960MHz and 1710-2690 MHz bands. Combined with an SMA to U.FL Adapter, this duck antenna works perfectly with our LTE Cat M1/NB-IoT Shield.

SKU: AF-1501

The Adafruit Trinket 5V is a tiny microcontroller board built around the Atmel ATtiny85 processor. At just 27mm × 15mm, it's small enough to fit into virtually any project and affordable enough to dedicate to a single build. Program it via the Arduino IDE over the Micro-USB connector — no separat...

SKU: DF-DFR0767

INTRODUCTIONCompute Module 4 IoT Router Carrier Board Mini is an internet expansion board based on the Raspberry Pi Compute Module 4. When connecting with a gigabit network card via PCle, it brings Raspberry Pi CM4 two full-speed gigabit network ports and offers better performance, lower CPU usag...