All Products
Showing 1-20 of 25 products · 12 unavailable products hidden
Particle Xenon IoT Development Kit
The Particle Xenon is a low-cost mesh-enabled development board. With the Nordic nRF52840 SoC you have all the power of an ARM Cortex M4 with OpenThread mesh networking, NFC, plenty of GPIOs, LiPo charging and more. The board is designed to act as a standalone endpoint or repeater in a Particl...
Particle Mesh WiFi Bundle - Full Starter Kit
Woohoo, it's time for a Particle Mesh party! So why not cater for connectivity with the Particle Mesh Wi-Fi Bundle, a veritable smörgåsbord (yum!) to begin building mesh networking for your IoT project. Particle Mesh means you can create local networks that collect data, share messages, and co...
PM2.5 Air Quality Kit (PMSA003 + SHT20)
The PM2.5 Air Quality Kit combines a PMSA003 laser particulate sensor with an SHT20 temperature and humidity sensor in a single M5Stack-compatible module. It measures ambient particulate concentration, temperature, and humidity — making it ideal for air quality monitoring deployments. The PMSA00...
PM2.5 Air Quality Sensor and Breadboard Adapter Kit - PMS5003
Breathe easy, knowing that you can track and sense the quality of the air around you with the PM2.5 Air Quality Sensor with Breadboard Adapter particulate sensor. Mad Max & Furiosa definitely should have hooked up one of these in their truck while scavenging the dusty desert wilderness...
SparkFun Photon RedBoard
The SparkFun Photon RedBoard, to put it simply, is a WiFi/Microcontroller development board in the Arduino form-factor for the Photon. It’s easy to use, it’s powerful, and it’s connected to the cloud. With the best support, potential, and performance the Photon RedBoard provides you with an IoT d...
Photon Header - 12 Pin Female
A standard 1×12 female header designed for the Particle Photon and Photon ProtoShield boards. Add reliable, stackable connectivity to your next Photon project with this 0.1" (2.54mm) pitch header. While designed for the Photon ecosystem, this header works anywhere you need a standard 12-pin fema...
Particle Photon
The Particle Photon is a compact WiFi development board for building connected Internet of Things (IoT) projects and products. Powered by a Broadcom BCM43362 WiFi chip and an STM32F205 ARM Cortex M3 microcontroller running at 120 MHz, it offers serious processing power in a breadboard-friendly fo...
Photon Stackable Header - 12 Pin
These stackable headers are made to work with the Particle Photon and Photon ProtoShield boards. Each header adds a great deal of connectivity to your next Photon project. Each order includes one 1x12 stackable header with pins spaced at 0.1". If you don’t have a Particle Photon, that’s fine! Th...
Gravity: PM2.5 Air Quality Sensor
The Gravity PM2.5 Air Quality Sensor uses laser scattering to measure suspended particulate matter in three size ranges — PM1.0, PM2.5, and PM10 — and outputs concentration data via I2C. With a minimum detectable particle size of 0.3 µm and a response time under 1 second, it provides real-time, a...
PhoBot - Robotics Shield for Photon
Get your Particle (formally known as Spark) Photon moving with a PhoBot Robotics shield. No, this is not a robot that makes you a delicious bowl of Vietnamese soup. Instead, it's a board from Simon Monk that's kind of like a Motorshield for your Spark Core or Particle Photon th...
Adafruit PMSA003I Air Quality Breakout - STEMMA QT / Qwiic
The Adafruit PMSA003I Air Quality Breakout is a compact laser-scattering particulate matter sensor with an I2C interface — a significant advantage over the UART-based sensors that dominate this category. Simply connect via STEMMA QT / Qwiic and start reading air quality data with no soldering req...
Particulate Matter Sensor - SPS30
The Sensirion SPS30 is a compact, high-quality optical particle sensor that uses laser scattering and Sensirion's innovative contamination-resistance technology for superior binning and particle measurement. It measures both mass concentration and particle count across PM1.0, PM2.5, PM4.0, and PM...
Octopus Dust Sensor Detector Module with Sharp GP2Y1010AU0F
The Octopus Dust Sensor Module features the Sharp GP2Y1010AU0F optical dust sensor, capable of detecting fine particles with a diameter as small as 0.8 μm. It uses an infrared LED and phototransistor to measure dust density via light scattering, outputting an analogue voltage proportional to dust...
PM2.5 Air Quality Sensor with I2C Interface - PMSA003I
The PMSA003I is a compact particulate matter sensor that measures PM1.0, PM2.5, and PM10.0 concentrations using laser scattering. Unlike most PM sensors that use UART, this version features an I2C interface, making it straightforward to use with Arduino, Raspberry Pi, and other microcontrollers w...
Fermion BMV080 Fanless PM1/PM2.5/PM10 Air Quality Sensor
·
This ultra-compact particulate matter sensor breakout is built around the Bosch BMV080 sensing unit, using laser-based light scattering with a fanless measurement principle. It can monitor PM1, PM2.5 and PM10 mass concentrations while avoiding the noise, dust build-up and mechanical wear associat...
Indoor Air Quality Combo Sensor - SCD41/SEN55 (Qwiic)
·
Build a detailed indoor air monitor with this Qwiic combo board, pairing Sensirion’s SCD41 CO2 sensor with the SEN55 environmental sensor node. Together they measure CO2, volatile organic compounds (VOCs), particulate matter across PM1.0, PM2.5, PM4 and PM10, temperature and relative humidity.The...
Gravity: Laser PM2.5 Air Quality Sensor For Arduino
The Gravity Laser PM2.5 Air Quality Sensor uses laser scattering to measure suspended particulate matter concentrations in the air. It detects particles from 0.3 to 10 µm in diameter and outputs digital concentration data via a serial interface — ideal for building air quality monitors, weather s...
Sharp GP2Y1010AU0F Compact optical Dust Sensor
The Sharp GP2Y1010AU0F is a compact optical dust sensor that uses an internal infrared LED and phototransistor arranged diagonally to detect fine particles in the air. The sensor outputs an analog voltage proportional to dust density, and its pulse pattern can distinguish between smoke and dust p...
Air Quality Monitor (PM 2.5, Formaldehyde, Temperature Humidity Sensor)
A multifunction air quality monitor that measures particulate matter (PM2.5), formaldehyde concentration, temperature, and humidity. It uses laser scattering to detect suspended particles in the air, an electrochemical probe for formaldehyde detection, and an integrated sensor for temperature and...
Octopus PM2.5 module
The Octopus PM2.5 module from ElecFreaks is a laser-based particulate matter sensor built around the ZH03B dust sensor. It measures PM2.5 concentration in the air with high consistency and real-time response, capable of detecting particles as small as 0.3 µm in diameter. Part of the Octopus elec...
