All Products

SKU: AF-420

A 16×32 RGB LED matrix panel with 512 individually controllable LEDs at 6 mm pitch. Two IDC connectors on the back (input and output) allow panels to be daisy-chained for larger displays. Driven at a 1:8 scan rate using 12 digital pins and a 5V supply. These panels are designed for high-speed pr...

SKU: SF-COM-08530

A jumbo 6.5-inch (153mm tall) single-digit 7-segment display in red. This oversized display is visible from over 30 metres away, making it ideal for large-scale scoreboards, countdown timers, and public-facing numeric displays. Key Features Extra-Large Digit – 6.5" (153mm) tall, visible at lon...

SKU: AF-3422

The Adafruit Arcade Bonnet makes it easy to build retro gaming projects with a Raspberry Pi. It's sized to match the Pi Zero for compact builds, but works with any Pi that has a 2×20 header (Pi Zero, Pi 2, Pi 3, Pi B+, etc.). The bonnet manages all buttons and switches through an I2C GPIO expand...

SKU: AF-491

A button is a button, and a switch is a switch, but this LED illuminated arcade buttons is in a class of its own. It's similar in size to an arcade button (and will fit in holes drilled for 'standard' 30mm buttons) but has a built in LED that can be controlled separately from the switch action - ...

SKU: AF-473

This 30mm translucent red arcade button features a crystal-clear glossy finish and smooth button action. A pre-installed micro-switch with gold-plated contacts provides a satisfying press with tactile feedback — no strong click, just a clean, definite feel. Shorter than standard cheap arcade but...

SKU: AF-1271

Drive large 1.2" tall 7-segment displays with ease using this HT16K33-based I2C backpack. The updated design includes a built-in 5V boost converter so you get bright, consistent LED segments even when running from 3.3V power — no separate 5V supply needed. STEMMA QT / Qwiic connectors provide plu...

SKU: AF-475

This 30mm translucent green arcade button features a crystal-clear glossy finish and smooth button action. A pre-installed micro-switch with gold-plated contacts provides a satisfying press with tactile feedback — no strong click, just a clean, definite feel. Shorter than standard cheap arcade b...

SKU: AF-5967 · MPN: ADA5967

The Adafruit Proto Tripler PiCowbell gives your Raspberry Pi Pico or Pico W three side-by-side socket slots — plug in your Pico and up to two PiCowbell accessories with no soldering or stacking headers required. It also includes LiPo battery charging, a power switch, reset button, STEMMA QT conne...

SKU: AF-3464

The Adafruit Joy Bonnet turns your Raspberry Pi Zero into a handheld gaming device. This fully assembled bonnet sits on top of any Pi Zero and provides arcade-style controls — a mini joystick and buttons — that act as keyboard inputs once you run the Adafruit installer script. No soldering requir...

SKU: AF-476

This 30mm translucent blue arcade button features a crystal-clear glossy finish and smooth button action. A pre-installed micro-switch with gold-plated contacts provides a satisfying press with tactile feedback — no strong click, just a clean, definite feel. Shorter than standard cheap arcade bu...

SKU: AF-471

This 30mm translucent clear arcade button features a crystal-clear glossy finish and smooth button action. A pre-installed micro-switch with gold-plated contacts provides a satisfying press with tactile feedback — no strong click, just a clean, definite feel. Shorter than standard cheap arcade b...

SKU: SF-COM-07844

This is the very popular RGB combo but in SMD form. These units have four pads with a common anode configuration. Use this one LED for three status indicators or pulse width modulate all three and get mixed colors! Simple breakout board available below. Iv (Typical): Red: 81mcd Green: 130mcd B...

SKU: SF-DEV-21326 · MPN: DEV-21326

This compact MicroMod processor board adds an STM32F405 to a compatible MicroMod Carrier Board, giving your project an ARM® Cortex®-M4 32-bit RISC core in a small, swappable M.2 module.The bevelled edge connector keys into the MicroMod M.2 socket and is secured with the screw supplied with MicroM...

SKU: AF-2865

Put on your sunglasses before plugging in this shield — 40 eye-blistering RGBW LEDs adorn the NeoPixel Shield for a blast of configurable colour and white. Arranged in a 5×8 matrix, each pixel is individually addressable using just one pin (Digital #6 by default, changeable by cutting a trace). ...

SKU: AF-3838

These quick-connect wire pairs make wiring arcade buttons and micro switches fast and simple. Each wire comes as a pair with two 0.25" quick-connect terminals pre-crimped, terminated together in a JST 2.5mm 2-pin connector that's breadboard compatible (fits 0.1" headers). The 0.25" size fits bot...

SKU: AF-3354

The Rainbow HAT from Pimoroni has a buffet of sensors, inputs, and displays to explore Android Things™. Use it as a weather station, a clock, a timer or stopwatch, a mood light, or endless other things.Pimoroni collaborated with the Android Things™ team at Google to create this great add-on board...

SKU: AF-2674

If you've been diggin' our monochome OLEDs but need something bigger, this display will delight you. These displays are 2.7" diagonal, and very readable due to the high contrast of an OLED display. This display is made of 128x64 individual white OLED pixels, each one is turned on or off by the co...

SKU: DF-FIT0381

A 10W high-power RGB LED module consisting of nine separate LED dies (red, green, and blue) on a single aluminium substrate. With a combined luminous output of up to 500 lumens, it delivers enough brightness for searchlights, stage lighting effects, and colour-mixing displays. Each colour channe...

SKU: AF-2719

If you've been diggin' our monochrome OLEDs but need something bigger, this display will delight you! These displays are 2.42" diagonal, and very readable due to the high contrast of an OLED display. This display is made of 128x64 individual white OLED pixels, each one turned on or off by the ...

SKU: AF-1194

BAM! This 60mm diameter arcade button is large and inviting and ready for all sorts of pressing and pushing. We've seen these on some games of skill in arcades, they're easy to mount on nearly any kind of enclosure. They're not waterproof or weatherproof, so best used indoors.This button has a fl...