All Products

SKU: SF-TOL-27923 · MPN: TOL-27923

This handy tool helps remove a standard 2-pin JST-PH connector with 2mm pitch, such as the female connector commonly found on single-cell LiPo batteries. It gives you something safer and easier to grip than the connector body itself, helping avoid sore fingertips, pinched wires from needle nose p...

SKU: DF-FIT0611

This is a Li-ion Battery Holder specially designed for micro: bit educational robot Maqueen. It can be used to hold a CR123A 3.6V lithium rechargeable battery to provide more than 8 hours continuous power for Maqueen. Using this environment-friendly product, you can save about 200 batteries in on...

SKU: AF-4779

This compact battery holder connects 3× AA batteries in series, providing 3.3–4.5V output — a similar range to lithium-ion/polymer batteries. It features a built-in on/off switch and a genuine JST-PH 2-pin connector with a 6" cable, making it a convenient drop-in power source for 3.3V projects wi...

SKU: PI-COM1305

A compact 2×AAA battery holder with a built-in power switch and JST connector, compatible with micro:bit and other boards that accept JST battery inputs. This is the same battery holder included in our micro:bit accessories kit. Key Features Power Switch – On/off switch for convenient power co...

SKU: AF-1863

This switched JST connector is the best way to quickly prototype with our LiPoly batteries. We paired a genuine JST connector with a slide switch that can do up to 600mA. Both are soldered onto a breadboard-friendly breakout. There's two ground pins, one 'switched' power pin, and one pin that ...

SKU: AF-5234

An accessories kit for building a complete Adafruit LED Glasses project. Includes a chunky plastic glasses frame as a mechanical base, a STEMMA QT cable for connecting the LED panel to the driver board, a portable battery holder with belt clip, an extension cable, and mounting hardware. Key Feat...

SKU: AF-5980 · MPN: ADA5980

The Feather RP2040 Adalogger combines the RP2040 dual-core processor with a MicroSD card holder for data logging and file storage. It features 8 MB SPI flash, 264 KB SRAM, USB Type C, STEMMA QT connector, and built-in LiPo battery charging — ready for portable data recording projects with Arduino...

SKU: AF-1769

This JST PH 2-pin SMT right-angle connector is a surface-mount header designed to accept standard JST PH 2-pin plugs. It's commonly used as a battery connector on microcontroller boards, LiPo chargers, and small electronics — compatible with single-cell LiPo/Li-Ion battery leads, coin cell holder...

SKU: SF-PRT-09749

A 2-pin right-angle JST PH series connector for through-hole PCB mounting. With a 2 mm pin pitch, this is the standard connector used on most single-cell LiPo batteries, making it ideal for battery-powered projects and charging circuits. Key Features JST PH Series – Industry-standard 2 mm pitc...

SKU: AF-2769

The Circuit Playground Express Educator's Pack is a comprehensive classroom kit built around Adafruit's versatile Circuit Playground Express board. It includes everything educators need to teach electronics, coding, and wearable technology — from conductive thread and servos to battery packs and ...

SKU: AF-4029

This cable will let you turn a JST PH 4-pin cable port into 4 individual wires with grippy mini alligator clips. We're carrying these to match up with any of our boards or breakouts with 'STEMMA' connectors on them such as the HalloWing or NeoTrellis M4. Can also be used with any STEMMA ...

SKU: AF-1862

A simple 2-pin connector soldered onto a breadboard-friendly breakout. This is compatible with the "JST PH 2-pin" connector. Mates perfectly with all our 1-cell LiPoly and LiIon batteries as well as our 6V coin cell holder and 3xAAA battery pack. We also have simple JST pigtails that mate w...

SKU: AF-4030

This cable will let you turn a JST PH 3-pin cable port into 3 individual wires with grippy mini alligator clips. We're carrying these to match up with any of our boards or breakouts with 3-pin 'STEMMA' connectors on them such as the HalloWing or NeoTrellis M4. This cable has a JST PH 3-pin ...

SKU: DF-FIT0625 · MPN: FIT0625

This compact battery holder is a handy portable power pack for small electronics and maker projects. It holds two AAA batteries and connects them in series, making it suitable for projects that need a simple removable battery supply.The holder includes a cover and an integrated power switch, so y...

SKU: SF-PRT-18769

This 3xAA battery holder puts a nice finishing touch on your battery powered project. This holder features a removable, sliding cover as well as an ON/OFF switch that can be used to control power to your project. The 6" (~150mm) cable has been terminated with a JST connector. Note: Please keep in...

SKU: AF-4192

A slim, open-top 2×AAA battery holder with a genuine JST PH connector. Two AAA batteries in series provide approximately 3V — ideal for powering low-voltage electronics projects, microcontrollers, and boards with JST PH battery inputs. The JST PH connector polarity matches Adafruit's Li-Ion/LiPo...

SKU: EF-EF05043

The Nezha Breakout Board is a feature-packed expansion board for the micro:bit, designed with classroom use in mind. It integrates 4 servo drivers, 4 motor drivers, and 7 sensor ports — all using RJ11 connectors with foolproof anti-reversal design, so students can plug in confidently without dama...

SKU: AF-727

A slim 3×AAA battery holder with a built-in on/off switch and JST 2-pin connector. The series configuration outputs approximately 3.6–4.5V — a similar range to lithium-ion batteries — making it an ideal non-rechargeable alternative for 3.3V projects that use a JST battery connector. Uses a genui...

SKU: DF-DFR0528

DFRobot UPS HAT is an uninterruptable power supply shield designed for the Raspberry Pi Zero series, and also compatible with Pi 2/3/A+. The UPS HAT can continue to provide power to the Raspberry Pi for a certain period of time when the system is powered off, by which to avoid system damage and a...

SKU: AF-3286

A slim 3×AAA battery holder with a built-in on/off switch, JST 2-pin connector, and an ergonomic belt clip. The series configuration outputs approximately 3.6–4.5V — a similar range to lithium-ion batteries — making it an ideal non-rechargeable alternative for 3.3V projects that use a JST battery...