All Products

SKU: AF-4437

This one's going out to all the makers and designers who use DIN railing in their builds. This adapter plate is perfect for simplifying complex wiring. You connect a 2x20 IDC cable to this very PCB, which can be DIN rail-mounted. Then, all 40 pins are broken out into terminal blocks, so...

SKU: AF-6038 · MPN: ADA6038

The Adafruit SPI Flash SD Card breakout features an XTSD 2 GB chip — an SD card in an SMT package that you can wire up like standard SPI flash but use with existing SD card libraries. It comes pre-formatted as a 2 GB FAT volume and works straight away with the built-in SD library in Arduino or th...

SKU: AF-2279

The 64×32 RGB LED Matrix Panel with 3mm pitch features 2048 bright RGB LEDs in a 192×96mm panel. With tighter pixel spacing than 4mm and 5mm variants, this panel delivers sharp images for indoor viewing at moderate distances. The panel features two IDC connectors on the back (input and output) f...

SKU: AF-1212

The Adafruit SMT Breakout PCB for 8-pin SOIC, TSSOP, or MSOP packages lets you easily prototype with surface-mount chips on standard solderless breadboards. One side accommodates an 8-pin TSSOP/MSOP footprint while the other supports 8-pin SOIC (narrow, medium, or wide), with traces routed to two...

SKU: DF-DFR0239

This small size breakout is programmable full-color RGB LED for hobbyists, industrial designers, prototypers, and experimenters. It is designed to allow the easy addition of dynamic indicators, displays, and lighting to existing or new projects. Controlled by PWM channels can be available in s...

SKU: AF-2278

The 64×32 RGB LED Matrix Panel with 4mm pitch features 2048 bright RGB LEDs in a 256×128mm panel. This mid-range pitch offers a good balance between pixel density and viewing distance, suitable for indoor displays viewed from a few metres away. The panel features two IDC connectors on the back (...

SKU: AF-2277

The 64×32 RGB LED Matrix Panel with 5mm pitch features 2048 bright RGB LEDs in a 320×160mm panel. The wider pixel spacing makes this panel ideal for viewing from further away, producing clear images and text at distances of several metres. The panel features two IDC connectors on the back (input...

SKU: EC-CDE20032P

An Arduino Uno shield that makes it easy to drive a 16×32 RGB LED matrix panel with a HUB75 connector. Instead of wiring up 12 individual jumper wires, this shield provides a matching 2×8 IDC connector for a clean, reliable connection between your Arduino and the panel. The shield also includes ...

SKU: SF-PRT-12807

A standard 2×3 male through-hole header with 0.1″ (2.54 mm) pin spacing. This is the common configuration used for ISP (In-System Programming) connectors on AVR microcontroller boards and programmers. Key Features 2×3 Pin Layout – Standard ISP connector configuration 0.1″ (2.54 mm) Pitch – Co...

SKU: AF-2104

This 2x8 (16 pin - 0.1" spaced) IDC Breadboard Helper is great in conjunction with any 16-pin IDC cables. It comes in two parts, a 'pin-through' socket and a male header. The socket straddles the center of a breadboard or Perma-Proto and then header p...

SKU: AF-2270

The "poor woman's" Raspberry Pi A+ / B+ / Pi 2 cobbler! This combo of 2x20 pin (0.1 spaced) header and socket is for our popular GPIO Ribbon Cable for Raspberry Pi Model A+/B+/Pi 2 (40 pins).  It comes in two parts, a 'pin-through' socket and a male header. The socket straddles the c...

SKU: AF-607

A 32×32 full-colour RGB LED matrix panel with 1024 LEDs at 4mm pitch, measuring approximately 5 inches (128mm) square. These panels are commonly used in video walls and signage, delivering bright, vivid colours with good white balance uniformity. On the back, dual IDC connectors (input and output...

SKU: AF-5294

This 20-pin GPIO ribbon cable provides a clean, reliable connection between PCBs, development boards, and breakout headers. The soft, flexible 0.05″ ribbon cable with keyed IDC connectors on both ends ensures correct orientation every time. Pin 1 is marked with a pink stripe along the side of th...

SKU: EC-AS402812NP

This is the NeoPixel Shield from Duinofun. This Arduino shield is equipped with 40 WS2812 RGB LEDs arranged in an 5x8 matrix with on one pin (Digital #6) needed to control them all.Each shield is powered by the 5V onboard Arduino supply and as long as you aren’t lighting up all the LEDs full powe...

SKU: DF-DFR0460

The 64×32 RGB LED Matrix Panel with 4mm pitch from DFRobot features 2048 full-colour RGB LEDs, each independently controllable. With its slim 11mm profile and durable construction, this panel is suitable for both indoor and outdoor use in harsh environments. The panel features two IDC connectors...

SKU: AF-420

A 16×32 RGB LED matrix panel with 512 individually controllable LEDs at 6 mm pitch. Two IDC connectors on the back (input and output) allow panels to be daisy-chained for larger displays. Driven at a 1:8 scan rate using 12 digital pins and a 5V supply. These panels are designed for high-speed pr...

SKU: SF-CAB-13028

This 40-pin (2×20) flat ribbon cable connects to the GPIO header on the Raspberry Pi, providing easy access to all GPIO, I2C, SPI, UART, and power pins. The 6-inch (15 cm) length keeps things tidy while giving you room to work with breadboards, breakout boards, and HATs. The cable uses standard ...

SKU: AF-1484

A 32×32 full-colour RGB LED matrix panel with 1024 LEDs at 6mm pitch. The larger pitch provides good visibility at greater distances, making it suitable for signage and larger-scale displays. Pre-balanced white output and a 1:16 scan rate with 12 × 16-bit latches handle the display multiplexing. ...

SKU: AF-2101

The "poor woman's" Raspberry Pi cobbler! This combo of 2x13 pin (0.1 spaced) header and socket is for our popular GPIO Ribbon Cable for Raspberry Pi Model A and B.  It comes in two parts, a 'pin-through' socket and a male header. The socket straddles the center of a breadboard o...

SKU: AF-370

A 6" (150mm) IDC ribbon cable with 10-pin 2×5 socket connectors on both ends at standard 2.54mm (0.1") pitch. Commonly used for AVR ISP programming, JTAG connections, and other 10-pin box header interfaces. Key Features 10-Pin (2×5) – Standard box header socket connectors on both ends 2.54mm ...