All Products

SKU: AF-4904

A 40-pin FPC to straight 2×20 IDC male plug header adapter board. Converts a standard 40-pin 0.5mm pitch FPC/FFC cable connection into a male GPIO plug, allowing you to connect HATs and Bonnets at a distance from your Raspberry Pi via a slim, flexible cable. Insert the male plug into your HAT or...

SKU: WS-18994

A GPIO header adapter designed specifically for the Raspberry Pi 400. It connects to the Pi 400's rear GPIO header and provides a standard 40-pin breakout, making it easy to attach HATs, breadboards, and other expansion boards. The header features colour-coded pins for quick identification of po...

SKU: PH-102895

A 150mm GPIO ribbon cable for Raspberry Pi with a 2×20 male connector on one end and a 2×20 female connector on the other. Extends the full 40-pin GPIO header for use with HATs, Bonnets, and other accessories at a distance from the board. Works with any 40-pin Raspberry Pi, including the Pi 400 ...

SKU: SB-21239

A GPIO header extension adapter for the Raspberry Pi 400, providing a standard 2×20 pin GPIO header so you can connect HATs, pHATs, and other add-on boards. Since the Pi 400's GPIO header is recessed at the back of the keyboard unit, this adapter brings the pins out to a convenient, accessible po...

SKU: DEV-14356

The pi-topPROTO is a HAT-compatible add-on board for prototyping electronics for your pi-top or pi-topCEED. With plenty of space available to build circuits that can interact with your pi-top — as well as a full 40-pin GPIO on top for a desired Raspberry Pi HAT — the pi-topPROTO makes a great add...

SKU: LB-LS3506

This 2×20 pin extra tall male GPIO header stands 12 mm high, providing additional clearance when soldering onto HATs, Bonnets, or custom boards for Raspberry Pi. It's ideal for boards that don't come with headers pre-soldered, or when you need extra height for stacking. Key Features 40-Pin (2×...

SKU: AF-4280

The Adafruit DC & Stepper Motor Bonnet drives up to 4 DC motors or 2 stepper motors from your Raspberry Pi, with full PWM speed control. It uses a dedicated PWM driver chip over I2C, so only two pins (SDA/SCL) are needed — leaving the rest free for other I2C devices or HATs. The TB6612 MOSFET mo...

SKU: AF-2082

The Timber Pibow is a layered wood enclosure from Pimoroni for the Raspberry Pi 1 Model B+. Crafted from high-quality wood with transparent acrylic top and base layers, it provides a natural, elegant look while protecting the board. An extension layer is included for stacking HATs or other access...

SKU: KI-2746

When using through hole LEDs it can be hard to form the eyelets and then work out which leg is positive and negative. That's where these Sewable LED Holders come in! The 5mm LED holder boards, quickly and easily take any through hole 5mm LED and (after soldering in place) make them easy to use in...

SKU: AF-6196 · MPN: ADA6196

A warm-white LED filament shaped as the letter "F", made from COB (chip on board) LEDs — the same technology found in Edison-style LED bulbs. Dozens of micro LED diodes are bonded onto a thin metal backing and coated in silicone, producing a bright, uniform glow from both sides. Lightweight and ...

SKU: AF-6204 · MPN: ADA6204

A warm-white LED filament shaped as the letter "M", made from COB (chip on board) LEDs — the same technology found in Edison-style LED bulbs. Dozens of micro LED diodes are bonded onto a thin metal backing and coated in silicone, producing a bright, uniform glow from both sides. Lightweight and ...

SKU: WS-22383

The Zero 2W to 3B Adapter is the perfect alternative solution for your Raspberry Pi 3 Model B/B+! This adapter features pogo pin connection, allowing it to easily attach to your Pi 3B/B+ and a headphone jack that is extended from USB. With 4-channel USB ports, compatible with USB 2.0/1.1 tran...

SKU: AF-5849 · MPN: ADA5849

Incredibly tiny 1111-size (1.1mm × 1.1mm) individually addressable RGB NeoPixel LEDs for creating ultra-compact or high-density smart LED designs. These are the same integrated LED technology used in NeoPixel strips and pixels, but at a fraction of the size — 20× smaller than standard 5050 NeoPix...

SKU: AF-6194 · MPN: ADA6194

A warm-white LED filament shaped as the letter "D", made from COB (chip on board) LEDs — the same technology found in Edison-style LED bulbs. Dozens of micro LED diodes are bonded onto a thin metal backing and coated in silicone, producing a bright, uniform glow from both sides. Lightweight and ...

SKU: AF-5865 · MPN: ADA5865

Introducing nOOds - the most fun and flexible LED filament on the market! This 24V, 1.2m long noodle is the perfect addition to your lighting collection, adding a touch of vibrant lime green to any space. Inspired by our love for noodles, these flexible LED filaments are sure to bring a smile to ...

SKU: AF-1168

A silver-coloured woven conductive fabric made from copper and nickel-plated nylon. Highly conductive with a resistance of less than 1 Ω per 30 cm in any direction across the textile. Use it to create soft switches, plush keypads, capacitive touch sensors, and other textile interfaces for wearabl...