All Products

SKU: SF-PRT-13925

These headers are made to work with the Teensy 3.2 and Teensy LC development boards. Each kit of headers makes your Teensy breadboard compatible and will allow for stacking a Teensy and Teensy-compatible shield board. This kit includes five headers (two 13-pin, one 7-pin, one 3-pin, and one 2x...

SKU: SF-PRT-27911 · MPN: PRT-27911

This female header is designed for surface-mount applications where through-hole pins are not suitable. It uses standard 0.1 inch spacing, making it useful for compact PCB layouts and common maker electronics projects.The surface-mount legs are staggered to help with stress relief once soldered t...

SKU: SF-PRT-17152

These headers are made to work with the Teensy 4.1, Teensy 3.6, and Teensy 3.5 development boards. Each set of headers allows for your Teensy to be easily incorporated into a breadboard circuit or attach a shield on top of the board. This kit includes three headers (two 24-pin, and one 5-pin), en...

SKU: SF-PRT-14311

These headers are made to work with the SparkFun ESP32 Thing and ESP32 Power Control Shield boards. Each set of headers makes your ESP32 Thing easily stackable with the Power Control Shield or other applications. This set includes two 1x20 headers, enough to connect your ESP32 to anything you wan...

SKU: SF-PRT-16581

A 2×18 pin female header with standard 0.1" (2.54 mm) pitch spacing. Mates perfectly with the Alchitry Br Prototype Element Board and other 0.1"-spaced dual-row male headers. Specifications Configuration – 2×18 (36 pins total) Pitch – 0.1" (2.54 mm) Type – Female, through-hole Ideal For A...

SKU: SF-PRT-15187

These stackable headers are made to work with the SparkFun ESP32 Thing Plus to connect to shield with a Feather footprint. This set includes one 12-pin and one 16-pin header; the pins are spaced by 0.1".Each set of headers allows you to stack Feather shields on top of your ESP32 Thing Plus or plu...

SKU: AF-2975

The ultimate companion kit for anyone learning electronics. The Adafruit Parts Pal packs LEDs, resistors, capacitors, transistors, sensors, switches, and prototyping essentials into a handy storage box — everything you need to dive into breadboard projects right away. Pair it with an Arduino, Ra...

SKU: AF-2927

A Feather board without ambition is a Feather board without FeatherWings! This is the DC Motor + Stepper FeatherWing which will let you use 2 x bi-polar stepper motors or 4 x brushed DC motors (or 1 stepper and 2 DC motors). Using our Feather Stacking Headers or Feather Fem...

SKU: DF-FIT0106

A pack of ten 6-pin female headers with standard 0.1″ (2.54mm) pin spacing. Commonly used for Arduino shield connections and general prototyping. Key Features Standard 0.1″ Pitch – Compatible with breadboards, Arduino, and most development boards 6-Pin Configuration – Matches common Arduino a...

SKU: DF-FIT0164

This is a 6-pin female header, with extra long legs -- great for stacking Arduino shields. SPECIFICATIONS Pins are spaced by 0.1" Size: 15.58x23.05x2.4mm(0.9x0.6x0.1") (Pins: 15 mm)(Pins:0.59" ) The extended pin length is 14.5mm(0.57") as the...

SKU: KI-5313

The Kitronik Inventor's Kit for Arduino is a great way to get started with programming and hardware interaction with the Arduino. This Inventor's Kit contains everything you need to complete 10 experiments including using LEDs, motors, LDRs and capacitors. Arduino is an open-source code-able e...

SKU: DF-SEN0693 · MPN: SEN0693

Built around the Bosch BMI323, this compact Fermion module combines a 3-axis accelerometer and a 3-axis gyroscope on a 16 mm × 16 mm board. It provides high-rate acceleration and angular velocity data over I²C for embedded motion sensing, wearables, robotics, battery-powered IoT nodes and compact...

SKU: DF-KIT0071

The MiniQ Discovery Robot Kit is a 2WD mobile robot platform based on the MiniQ chassis and the Romeo V2 All-in-One Arduino-compatible controller. It comes with a Sharp GP2Y0A21 distance sensor and 9g micro servo pre-included, making it ready for obstacle avoidance and sensor-based navigation rig...

SKU: SF-PRT-09279

This is a 8-pin female header, with extra long legs – great for stacking Arduino shields. Pins are spaced by 0.1". Documents: Datasheet

SKU: DF-FIT0147

This is a 6-pin female header, with extra long legs -- great for stacking Arduino shields.Pins are spaced by 0.1". APPLICATIONS PCB Arduino Shield Header SPECIFICATIONS18.6 x 15.8 x 2.5(mm)(0.73x0.62x0.09") SHIPPING LIST6 Pin Single Row Female x10

SKU: SF-DEV-12761

The SparkFun microSD Shield gives your Arduino mass-storage capability via a microSD card slot, making it ideal for data-logging and projects that need to read or write files. Communication with the microSD card uses the SPI interface. The SCK, DI, and DO pins connect to the ATmega168/328's stan...

SKU: EC-ARS27361T

This motor shield uses dual TB6612 MOSFET drivers and a PCA9685PW I2C PWM controller to drive up to 4 DC motors or 2 stepper motors from an Arduino or compatible board. All motor control and speed management is handled via the I2C bus, freeing up digital pins for other uses. The stackable design...

SKU: SF-PRT-14322

These stackable headers are made to work with the Particle Photon and Photon ProtoShield boards. Each header adds a great deal of connectivity to your next Photon project. Each order includes one 1x12 stackable header with pins spaced at 0.1". If you don’t have a Particle Photon, that’s fine! Th...

SKU: SF-PRT-09280

This is a 6-pin female header, with extra long legs – great for stacking Arduino shields. Pins are spaced by 0.1". Documents: Datasheet

SKU: SF-PRT-10112

This 2 mm pitch 10-pin header mates with 2 mm XBee sockets and is ideal for creating custom breakout boards, "dummy" XBee modules for testing, or any project requiring 2 mm pitch pin headers. Key Features 2 mm Pitch – Matches XBee socket spacing 10 Pins – Compatible with standard XBee footpri...