All Products

SKU: LB-LS3381-B

A 12 mm panel-mount momentary push button with a smooth dome-shaped cap in blue, pre-wired with 20 cm red and black leads for easy connection. Normally open — pressing the button closes the contacts. Key Features Pre-Wired – 20 cm red and black leads attached, no soldering required Momentary ...

SKU: LB-LS3381-G

A 12 mm panel-mount momentary push button with a smooth dome-shaped cap in green, pre-wired with 20 cm red and black leads for easy connection. Normally open — pressing the button closes the contacts. Key Features Pre-Wired – 20 cm red and black leads attached, no soldering required Momentary...

SKU: LB-LS3381-R

A 12 mm panel-mount momentary push button with a smooth dome-shaped cap in red, pre-wired with 20 cm red and black leads for easy connection. Normally open — pressing the button closes the contacts. Key Features Pre-Wired – 20 cm red and black leads attached, no soldering required Momentary A...

SKU: LB-LS3381-W

A 12 mm panel-mount momentary push button with a smooth dome-shaped cap in white, pre-wired with 20 cm red and black leads for easy connection. Normally open — pressing the button closes the contacts. Key Features Pre-Wired – 20 cm red and black leads attached, no soldering required Momentary...

SKU: LB-LS3381-Y

A 12 mm panel-mount momentary push button with a smooth dome-shaped cap in yellow, pre-wired with 20 cm red and black leads for easy connection. Normally open — pressing the button closes the contacts. Key Features Pre-Wired – 20 cm red and black leads attached, no soldering required Momentar...

SKU: LB-LR0589-YELLOW

A 12 mm panel-mount momentary push button with a smooth dome-shaped cap in yellow. Normally open — pressing the button closes the contacts. The dome design provides a satisfying tactile feel and sits flush with the panel surface. Key Features Momentary Action – Normally open, closes on press ...

SKU: LB-12V3A

A regulated 12V 3A (36W) switching power supply that comes with multiple interchangeable DC plug adapters for compatibility with a wide range of 12V devices. Suitable for powering routers, LED strips, single-board computers, and other 12V electronics. Key Features 12V 3A Output – 36W regulated...

SKU: AF-798

Warning: This is a US-plug adapter and is not certified for use in Australia. Only purchase if you are using it outside Australia or with an appropriate plug adapter. A regulated 12V DC switching power adapter delivering up to 1000mA (1A). The slim profile fits into power strips without blocki...

SKU: TB-MP3147

This ultra-slim switchmode plug pack delivers 12V DC at 400 mA (4.8W) from a standard Australian/NZ mains outlet. Its slim profile allows multiple adaptors to sit side by side on a power board without blocking adjacent outlets — a common frustration with bulkier plug packs. The adaptor comes wit...

SKU: DF-FIT0493

A 12V DC gear motor with an integrated quadrature encoder, ideal for mobile robot platforms and closed-loop motor control. The 34:1 gearbox provides a no-load speed of 350 RPM with a stall torque of 12 kg·cm, and the encoder delivers 374 pulses per revolution of the output shaft for precise speed...

SKU: AF-448

A 12V EL (electroluminescent) wire and tape inverter for fixed installations and larger EL projects. Unlike pocket-sized 2×AA inverters, this brick-style inverter runs from a 12V DC input — connect it to a wall adapter for permanent setups, or use a larger battery pack (such as 8×AA) for extended...

SKU: DF-FIT0843

An ultra-thin flexible LED strip in ice blue, measuring just 2.5 mm wide and 1 mm thick. With 120 SMD 0805 LEDs per metre, this 1-metre strip runs on 12V DC and can be cut every 3 LEDs to fit your exact length requirements. The incredibly slim profile makes this strip ideal for lighting in tight...

SKU: DF-FIT0842

An ultra-thin flexible LED strip in yellow, measuring just 2.5 mm wide and 1 mm thick. With 120 SMD 0805 LEDs per metre, this 1-metre strip runs on 12V DC and can be cut every 3 LEDs to fit your exact length requirements. The incredibly slim profile makes this strip ideal for lighting in tight s...

SKU: LB-LS1017-280

The GA25-370 is a compact 12V DC gear motor with metal gears and a built-in speed encoder for closed-loop control. Running at 280 RPM, it provides a good balance of speed and torque for small robotics and automation projects. Key Features Built-In Speed Encoder – Real-time speed feedback for P...

SKU: LB-LS1017-60

The GA25-370 is a compact 12V DC gear motor with metal gears and a built-in speed encoder for closed-loop control. This 60 RPM variant uses a higher gear ratio for increased torque at lower speed, making it well-suited for applications that need precise, controlled movement. Key Features Built...

SKU: LB-LS0112-280

The JGA25-370 is a compact 12V DC gear motor with metal gears, delivering 280 RPM at 12V. This variant does not include a speed encoder, making it a simpler and more affordable option for projects that don't require closed-loop feedback. Key Features 280 RPM – At 12V nominal voltage Metal Gea...

SKU: LB-LS0112-60

The JGA25-370 is a compact 12V DC gear motor with metal gears, delivering 60 RPM at 12V. The higher gear ratio provides increased torque at lower speed, making it well-suited for applications needing slow, controlled movement. This variant does not include a speed encoder. Key Features 60 RPM ...

SKU: DF-FIT0277

The DFRobot 12V Low Noise DC Motor (Model 28PA51G) is a quiet, high-torque geared motor with a built-in two-phase hall encoder. Designed for applications where noise is a concern, it produces approximately 57–68 dBA under no-load conditions — making it well suited for indoor robotics and equipmen...

SKU: LB-LR0214-16

This compact 12V temperature controller features a 3-digit LED display for setting and monitoring temperature, along with a built-in 10A relay for switching heating or cooling loads. It uses an NTC thermistor probe (included) for measurement across a wide range of −50 to 110°C. The relay operate...

SKU: DF-FIT0498

This 12V normally closed solenoid valve controls water flow through a 1/2″ (DN15) inlet and outlet. It remains closed when unpowered and opens when 12V is applied — no polarity distinction is required. Pair it with a Gravity Water Flow Sensor (1/2″) for real-time flow monitoring in automated syst...