All Products

SKU: AF-2456

This medium flip-up toggle clamp provides a quick, reliable way to press and hold PCBs firmly in place during testing, soldering, or pogo-pin bed operations. The rounded rubber tip grips securely without marring or damaging circuit boards, and the height and position are fully adjustable along th...

SKU: AF-2459

*Ka-thunk* Pin down that PCB with our Toggle Clamp, a sturdy and reliable way to quickly press and release with precision! A pogo-pin bed is a great way to connect and test boards without any soldering, but you have to somehow get that PCB aligned right and evenly pressed down on each pog...

SKU: SF-TOL-25930 · MPN: TOL-25930

This clamp set is made for reliable workholding on compatible CNC and machining setups. The clamps are heavy-duty, moulded from glass-filled nylon, and designed to be quick to remove thanks to magnetic actuation.The Crush-It Essentials and Stops are reinforced with stainless steel hardware, makin...

SKU: LB-LS4651

A versatile PCB stand with magnetic clips for holding circuit boards during soldering, assembly, and repair. The six freely positionable magnetic pins grip boards securely from below, accommodating PCB thicknesses from 0.2 to 1.8 mm. The pins never demagnetise, providing reliable clamping every t...

SKU: SF-COM-29200 · MPN: COM-29200

This compact connector is a 16-pin, surface-mount ZIF FPC connector with a 0.5mm pitch, suited to connecting compatible flat flexible cables to your PCB.It uses a right-angle layout with contacts on both the top and bottom, helping support dual-contact cable arrangements in tight designs. The fli...

SKU: AF-1055

A sturdy adjustable mount for laser diode modules. The set-screw clamp holds the laser securely, while the tilt mechanism lets you aim the beam precisely. A flat mounting plate with two slotted holes makes it easy to attach and reposition on a surface. Key Features Adjustable Tilt – Aim the la...

SKU: AF-3083

A compact aluminium heatsink with pre-applied thermal adhesive for easy installation on the Raspberry Pi 3 and other single board computers. Simply peel off the protective film and press firmly onto the processor — no additional thermal paste or clips required. In testing, a Raspberry Pi 3 witho...

SKU: SF-TOL-14793

The Nomad Flip Jig is a handy accessory for your Nomad 883 Pro that allows you to cut both sides of a part while maintaining perfect alignment. Each one of these jigs is precision machined to mount to the Nomad’s table and uses the CNC’s built-in machine calibration to make it easy to locate whil...

SKU: AF-3791

The Adjustable PCB Clamp Holder from Pro's Kit is designed for larger, heavier PCB soldering and desoldering. But it works great for small boards too and is very easy to adjust. A great choice for any workbench if you've got enough room for it! 4 slots for varying PCB thicknesses Sturdy, non-...

SKU: AF-1182

The SK8 is an aluminium cast shaft support for 8mm linear rails. Simply slide the rail through the clamp, tighten the clamp screw to lock it in place, then bolt the support down to your frame using up to M6 bolts. Easy to open and reposition when you need to disassemble or adjust your build. Sol...

SKU: AF-3718

Are you still looking for that perfect PCB holder? The hefty yet portable Heavy Stainless Steel PCB Holder will rock out when you rework out. These were initially marketed for people doing cell phone repair and rework and we've found this to be an excellent vise for SMT work in particular...

SKU: DF-FIT0893 · MPN: FIT0893

This compact push-in wire connector turns one input connection into three output connections, making it a handy little power distribution tool for low-voltage DC wiring.The internal conductive spring clamp is made from nickel-coated steel for a tight, anti-corrosion grip that is designed to resis...

SKU: TB-ST0358

A miniature DPDT toggle switch with a momentary-off-momentary (mom–off–mom) action. The toggle springs back to the centre-off position when released from either direction, making it suitable for joystick-style controls, motor direction switching, and momentary signal routing. Features solder tag...

SKU: SF-TOL-25959 · MPN: TOL-25959

This small refillable bottle is handy for storing and dispensing liquids in the workshop, lab bench or maker space. It has a flip-top cap for controlled dispensing and a compact 2 oz. capacity.The bottle is made from translucent, impact-resistant HDPE, so you can see the contents while keeping it...

SKU: SF-PRT-22461

A 10-way 3.5mm-pitch PCB terminal block paired with a matching rising clamp screw socket. Together they provide robust, solderless I/O and power connections for prototyping and production boards alike. The terminal block solders to your PCB at a 90° angle, while the rising clamp socket plugs in ...

SKU: DF-DFR0789-G · MPN: DFR0789-G

This compact illuminated push-button module combines a tactile switch with a built-in green LED indicator, making it handy for interactive electronics, control panels and classroom builds.It uses a self-locking toggle action rather than a momentary press. Press the button once and the output goes...

SKU: SF-PRT-21328 · MPN: PRT-21328

This 10-position right-angle terminal block header is made for secure, pluggable wire-to-board connections on a PCB. Solder it directly to your board and use it as the receptacle for a removable screw terminal block.It is well suited to I/O signals and power lines that may need to be disconnected...

SKU: SF-PRT-21329 · MPN: PRT-21329

This pluggable terminal block socket is made for secure, removable wire-to-board connections in power and I/O wiring. The 10-way layout uses a 3.5mm pitch, giving you a compact connector for multi-wire harnesses.Each position uses a rising clamp screw terminal to hold the wire firmly without dama...

SKU: SA-620716

The Translucent Optic One is a compact, handheld multi-function optical tool that packs seven features into one portable device. It includes a compass, monocular, binocular, signalling mirror, 2× and 4× magnifiers, and a magnifying mirror — making it a versatile companion for outdoor exploration ...

SKU: SF-PRT-28863 · MPN: PRT-28863

This simple pair of screw clamps is handy for securing parts of your project during mounting, helping keep cables or assemblies neatly held in place.They are the same style of clamps supplied with the Weather Meter Kit, making them useful as replacements, spares, or for similar outdoor sensing an...