All Products

SKU: SF-CAB-25596

With the SparkFun Qwiic Connect System expanding every day, we want to make sure it becomes as accessible as possible but we understand there are other systems that can compliment it out there. The Qwiic to STEMMA Adapter Cable allows interoperability between the SparkFun Qwiic Connect System and...

SKU: SF-PRT-17257

This is a 500mm long 4-conductor cable with 1mm JST termination. It’s designed to connect Qwiic enabled components together but can be used for other applications as well. The cable insulation is made from silicon making it more flexible than our original Qwiic cable particularly in tig...

SKU: AF-5820 · MPN: ADA5820

This 500mm long camera cable is specifically designed to work with the Raspberry Pi 5 series. Just plug it into your Pi 5's camera port and then the other end into one of the official Pi Cameras for photo and video joy. Raspberry Pi 5 provides two four-lane MIPI connectors, each of which can supp...

SKU: SF-PRT-26026

This is a 500mm camera cable for use with MIPI displays and the Raspberry Pi 5. The Raspberry Pi 5 provides two four-lane MIPI connectors, each of which can support either a camera or a display. These connectors use the same 22-way, 0.5mm-pitch “mini” FPC format as the Compute Module Development ...

SKU: DF-FIT0335

This 500 mm Y-cable is typically used to connect two servos to a single servo port on an RC receiver or servo controller. It has a single female JR connector connected to two male JR connectors, which means it is compatible with almost all of the RC servos.The connectors have gold-flashed cont...

SKU: AF-5497

We now have a handy extension cord for JST-XH projects! One end has a JST-XH socket, and the other has a matching plug. Between the two, 500mm of color-coded wire. This solid 2.5mm pitch connector extension cable is great when you need something that can carry a couple amps of curr...

SKU: AF-1131

A 500 mm extension cable with a JST-PH 2-pin socket on one end and a matching plug on the other. The colour-coded wires make it easy to verify correct polarity. Compatible with JST-PH terminated battery packs including LiPo, Li-Ion, and AAA battery holders. Key Features JST-PH 2-Pin Connectors...

SKU: RP-SC1128

An adapter cable for connecting Raspberry Pi Camera modules to the Raspberry Pi 5. The Pi 5 uses a smaller 22-way, 0.5mm-pitch "mini" FPC connector for its two four-lane MIPI ports, while current Raspberry Pi cameras use the older 15-way, 1mm-pitch "standard" connector — this cable bridges the tw...

SKU: SF-KIT-30715 · MPN: KIT-30715

Add another controlled planting area to an existing AgXRP Starter Kit with this DIY expansion pack. It is designed to create a completely independent watering zone, so students can compare plant types, watering schedules and soil conditions side-by-side.The pack works with the XRP Controller in t...

SKU: SF-CAB-22726

This is a jumper adapter cable that comes pre-terminated with a female Qwiic JST connector on one end and female connectors on the other. This cable makes it easy to connect components with a Qwiic connector to the male pins on various development platforms. This cable is also a great way to atta...

SKU: SF-SEN-19013

The SparkFun Qwiic Mini ToF Imager is a 64-pixel Time-of-Flight ranging sensor built around the STMicroelectronics VL53L5CX. It provides multizone distance measurements up to 4000 mm across a 4×4 or 8×8 grid with a 63° diagonal field of view. The compact Mini version measures just 12.7 × 25.4 mm ...

SKU: SF-DEV-17156

An extended Qwiic shield that adds four Qwiic connectors to Teensy 4.1, Teensy 3.6, and Teensy 3.5 boards. Connects the I²C bus (GND, 3.3 V, SDA, SCL) to two horizontal and two vertical Qwiic ports for easy daisy-chaining of I²C sensors and actuators. Includes a PROG button that mirrors the Teen...

SKU: SF-PRT-28203 · MPN: PRT-28203

  The SparkFun Qwiic 5V Boost simplifies interfacing 5V I2C devices with the 3.3V Qwiic ecosystem. It takes the 3.3V I2C signals and power from its Qwiic connectors and boosts them to 5V, available on the PTH pins. This is perfect for powering peripherals like RGB LEDs or DC fans commonl...

SKU: SF-WRL-30678 · MPN: WRL-30678

Built around Espressif’s ESP32-C5-WROOM-1 module, this Thing Plus board gives IoT projects a compact microcontroller platform with dual-band WiFi 6, Bluetooth 5 LE, Zigbee and Thread connectivity. It pairs a 32-bit RISC-V single-core microprocessor with 8MB Flash and 8MB PSRAM for connected proje...

SKU: AF-4399

This 4-wire cable is 50mm / 1.9" long and fitted with JST SH female 4-pin connectors on both ends. Compared with the chunkier JST PH these are 1mm pitch instead of 2mm, but still have a nice latching feel, while being easy to insert and remove. This cable can be used with Qwiic or STEMMA ...

SKU: AF-4208

A 10-pack of JST SH 4-pin right-angle connectors with 1 mm pitch through-hole mounting tabs. These are the standard connectors used with the Qwiic and STEMMA QT ecosystems, making it easy to add I2C connectivity to your own PCB designs. The solid plastic housing accepts standard Qwiic cables, an...

SKU: SF-KIT-15081

The SparkFun Qwiic Connect System is constantly growing in popularity with makers. So to make it even easier to get started, we’ve assembled this Qwiic Cable Kit for everyone. If you aren’t sure which Qwiic cable to use, this handy box includes all of them allowing you to save a little money and ...

SKU: SF-PRT-16766

A surface-mount 4-pin JST connector in a vertical orientation, designed for the SparkFun Qwiic I2C ecosystem. This 1 mm pitch connector is used on all Qwiic-compatible boards and lets you build your own I2C devices that integrate seamlessly with the Qwiic system. The vertical mount profile is id...

SKU: SF-KIT-15367

The SparkFun Qwiic Kit for Raspberry Pi provides everything you need to start using I2C sensors and displays with your Raspberry Pi via the Qwiic connector system. The kit includes a Qwiic HAT that adds four Qwiic connectors to your Pi's GPIO header, along with three sensor/display breakouts and ...

SKU: SF-GPS-30975 · MPN: GPS-30975

Built around the u-blox ZED-F9T-20B receiver, this breakout is made for projects where precise time matters as much as location. Under clear skies it can provide five nanoseconds of timing accuracy without requiring external GNSS correction data, making it suitable for 5G IoT networks, distribute...