All Products
Showing 1-20 of 50 products · 10 unavailable products hidden
DSS-P05 Standard Servo (5kg)
Cherokey:4WD Basic Arduino Robot Building Kit
Micro Servo - High Powered, High Torque Metal Gear
Pan and Tilt Kit (Black Anodized) (no servos)
DF05BB Tilt/Pan Kit (5kg)
Servo - Generic High Torque (Standard Size)
Analog Feedback Micro Servo - Plastic Gear
Ultrasonic Scanner kit(180°)
9g 270°Metal Servo with Analog Feedback (1.5kg)
Servo - Generic, 180° Rotation (Sub-Micro Size)
MPN: ROB-24052
Load Cell - 5kg, Straight Bar (TAL220B)
Robot Gripper - Extra Width
Servo - Generic (Sub-Micro Size)
Standard Nylon Gear Servo For Remote Control Model
Servo - Generic High Torque Continuous Rotation (Standard Size)
DF Metal Geared 15Kg Standard Servo 270° (DSS-M15S)
9g 300° Clutch Servo
2.3KG Serial Bus Servo (6V)
Channel Mount Gearbox Kit - Continuous Rotation (5:1 Ratio)
DF15RSMG 360 Degree Motor (20kg)
DSS-P05 Standard Servo (5kg)
The DSS-P05 is a standard-size servo with up to 4.2 kg·cm of torque at 6V, suitable for robot heads, arms, biped robots, and other projects requiring reliable 180° rotation. Specifications Voltage – 4.8–6.0V Torque – 3.5 kg·cm (4.8V) / 4.2 kg·cm (6.0V) Speed – 0.17 sec/60° (4.8V) / 0.12 sec/...
Cherokey:4WD Basic Arduino Robot Building Kit
The Cherokey 4WD Basic Arduino Robot Kit is a perfect wheeled robot platform to build your own robot and to get started with Arduino Robot. With just a few simple steps of assembling the hardware and tuning the software, and you'll learn all about Arduino, robotics, sensors, bluetooth comm...
Micro Servo - High Powered, High Torque Metal Gear
This high-powered micro servo packs nearly double the stall torque of standard micro servos into a compact metal-geared package. With approximately 180° of rotation, it works with any standard servo library, driver, or controller — including the Arduino Servo library, motor shields, and 16-channe...
Pan and Tilt Kit (Black Anodized) (no servos)
A black anodised pan-and-tilt assembly designed for horizontal surface mounting. Built using two DFRobot servo brackets, this kit provides two axes of rotation for cameras, sensors, or other payloads on small robots and remote-controlled platforms. The kit includes all necessary mounting hardwar...
DF05BB Tilt/Pan Kit (5kg)
A pan-and-tilt servo assembly for horizontal surface mounting, built with two DFRobot DF05BB ball-bearing servos and aluminium brackets. Ideal for camera gimbals, sensor heads, and small remote-controlled robot platforms. Key Features Two-Axis Movement – Pan and tilt via dual servo motors DF0...
Servo - Generic High Torque (Standard Size)
A reliable, high-torque standard-size servo (FS5106B) with dual ball bearings and nylon gears. Delivering up to 83.47 oz-in of torque at 6V with a speed of 0.16 sec/60°, it's a versatile choice for robotics, RC, and mechatronics projects. Features a standard 3-pin power and control cable with 18...
Analog Feedback Micro Servo - Plastic Gear
A plastic-geared micro servo with an extra trick — a fourth wire brings out the internal potentiometer feedback signal, letting you read the servo's actual position via an analog input. This feedback capability enables motion recording, playback, and improved stability in robotics applications. ...
Ultrasonic Scanner kit(180°)
An Ultrasonic sensor with scan capability is a must have feature for most robot application. This Ultrasonic scanner kit provides a cost effective way to have such feature for your robot application. This kit is able to scan upto 120 degree area with 10-400 cm (3.94-157.48") detecting range...
9g 270°Metal Servo with Analog Feedback (1.5kg)
A 9g micro servo with an extended 270° rotation range, metal gears, and built-in analog feedback (0–3.3V). The wider rotation range makes it suitable for applications requiring more travel than a standard 180° servo, while the analog feedback signal enables closed-loop position control via an MCU...
Servo - Generic, 180° Rotation (Sub-Micro Size)
· MPN: ROB-24052
Here is a simple, low-cost servo for all your mechatronic needs. This little guy is able to take in 6 volts and deliver 1.5kg/cm (at 6V). of maximum torque at 0.09 sec/60° (at 6V). This small servo comes with a standard 3 pin power and control cable, six arms and six screws. Note: This is the s...
Load Cell - 5kg, Straight Bar (TAL220B)
A straight bar load cell (strain gauge) that translates up to 5kg of force into an electrical signal. Made from aluminium alloy with four strain gauges in a Wheatstone bridge configuration, it measures electrical resistance changes proportional to the applied load. Use it to measure object weigh...
Robot Gripper - Extra Width
This is a 2 DOF robot gripper that can be installed with 2 servos so as to control gripper opening and closing with one servo, and steering gear motion control (or rotation) with the other servo. Velocity range is 0 to 54 mm (0 to 2.13"). Total weight about 45 g. The servo slot fit most...
Servo - Generic (Sub-Micro Size)
Here is a simple, low-cost, high quality servo for all your mechatronic needs. This servo is very similar in size and specifications to the Hitec HS-55. This little guy is able to take in 6 volts and deliver 20.8 oz-in. of maximum torque at 0.10 sec/60° This small servo comes with a standard 3 ...
Standard Nylon Gear Servo For Remote Control Model
High impact plastic is designed to withstand minor crashes and the effects of model fuelThrough-the-hole Circuit Board Plating - Eliminates the need for wires or leadsHeavy Duty Output Shaft - Designed not to break, and offers versatility when installing the servo hornNylon gearsSpecifications...
Servo - Generic High Torque Continuous Rotation (Standard Size)
Here, for all your mechatronic needs, is a simple, high quality continuous continuous rotation servo motor. This servo is able to take in 6 volts and deliver 66.7 oz-in. of maximum torque at 70 r/min. A standard 3-pin power and control cable is attached and all hardware listed below is included...
DF Metal Geared 15Kg Standard Servo 270° (DSS-M15S)
DSS-M15S is a heavy-duty metal gear standard servo with 270°wide angle, high torque power, improved stability and durability. Able to take in 6V and deliver a strong torque power of over 15Kg, this tough 270°servo will never let you down when you need it. Tested with high load capacity for...
9g 300° Clutch Servo
A 9g micro servo with 300° rotation and a built-in clutch mechanism that protects the servo from damage when external forces are applied. If the servo angle is changed by an external force during operation, the clutch allows it to automatically reset and continue working without stripping gears o...
2.3KG Serial Bus Servo (6V)
A miniature serial bus servo from DFRobot that delivers 2.3 kg·cm of stall torque at 6 V, controllable via TTL serial communication. Up to 253 servos can be daisy-chained in series, each assigned a unique ID for individual or synchronised control at baud rates up to 1 Mbps. The hybrid gear train...
Channel Mount Gearbox Kit - Continuous Rotation (5:1 Ratio)
These continuous rotation 5:1 gear ratio channel gearbox kits incorporate threaded side mounts to easily attach a standard size servo to numerous Actobotics products including tubing and channel; making it easy to incorporate a servo power gearbox into a custom pan & tilt, mechanical device, o...
DF15RSMG 360 Degree Motor (20kg)
This is the most powerful standard servo sized motor from DFRobot so far. The DF15RSMG equips with two pairs of the servo shells. One is a stardard shell with four M4 mounting holes. And the other one includes a shell with double bearing which is specially designed for the application of the rob...
