All Products
Showing 1-20 of 44 products · 16 unavailable products hidden
DIY LED Clock Kit - Learn to solder
MindPlus Coding Kit for Arduino
DS3231 High Precision RTC Clock Module for Raspberry Pi B+
Inventor's Kit for the Arduino
SparkFun DeadOn RTC Breakout - DS3234
NeoPixel Shield- WS2812 RGB LED Matrix
Smart Arduino Digital Servo Shield for Dynamixel AX
Arduino Infra-red obstacle sensor
Fermion: DS3231 Precise RTC (Breakout)
SparkFun Real Time Clock Module
Four - Channels Motor Shield For Arduino
Elecrow Starter Kit for Arduino
Arduino Zero to Hero Kit(Pre-order)
37 in 1 Sensor Kit for Arduino
SparkFun RGB LED Breakout - WS2812B
2x2A Arduino Motor Shield Twin
Photo cell (CdS photoresistor)
Real Time Clock Module (DS1307) V1.1
Adafruit DS1307 Real Time Clock Assembled Breakout Board
Arduino Industrial 101
DIY LED Clock Kit - Learn to solder
Build a functional RGB colour clock from scratch with this beginner-friendly soldering kit. The finished clock displays time, date, temperature, and day of the week on a 4-digit LED display — with 27 selectable colours or an automatic colour-cycling mode. Powered via USB 5 V, the clock features ...
MindPlus Coding Kit for Arduino
MindPlus Coding Kit for Arduino is a set of tools for programming learning. As its compatibility for Mind+, a graphical coding software for starters, and Arduino IDE, this kit is well applicable to students from the lower grade to the higher grade. It comes with an Arduino Uno R3 mainboard and a ...
DS3231 High Precision RTC Clock Module for Raspberry Pi B+
A high-precision real-time clock (RTC) module based on the DS3231 IC, designed to plug directly into a Raspberry Pi B+ (and compatible with Arduino). The DS3231 maintains accurate timekeeping with ±5 ppm accuracy (±0.432 seconds per day) across −40 °C to +85 °C, and includes a coin cell battery b...
Inventor's Kit for the Arduino
The Kitronik Inventor's Kit for Arduino is a great way to get started with programming and hardware interaction with the Arduino. This Inventor's Kit contains everything you need to complete 10 experiments including using LEDs, motors, LDRs and capacitors. Arduino is an open-source code-able e...
SparkFun DeadOn RTC Breakout - DS3234
Here is a real time clock based on the DS3234 Real Time Clock IC. The DS3234 is a low-cost, extremely accurate SPI bus real-time clock with an integrated temperature-compensated crystal oscillator and crystal. The RTC maintains seconds, minutes, hours, day, date, month, and year information....
NeoPixel Shield- WS2812 RGB LED Matrix
This is the NeoPixel Shield from Duinofun. This Arduino shield is equipped with 40 WS2812 RGB LEDs arranged in an 5x8 matrix with on one pin (Digital #6) needed to control them all.Each shield is powered by the 5V onboard Arduino supply and as long as you aren’t lighting up all the LEDs full powe...
Smart Arduino Digital Servo Shield for Dynamixel AX
Some day,a guy want to make a robotic dog as a gift to his little son.He brought some digital servos, a microcontroller,Lipo batterys...Then he found it hard to drive these smart servos with Arduino processor! So we developed a driver board that can easily & quickly drive the digital servo...
Arduino Infra-red obstacle sensor
The infrared obstacle sensor is a compact IR proximity module designed for robotics and automation projects. It detects obstacles within a 2–40 cm range and outputs a TTL-level signal, making it easy to integrate with Arduino and other microcontrollers. The detection distance is adjustable via a...
Fermion: DS3231 Precise RTC (Breakout)
This real-time clock module (RTC) uses the DS3231 chip that integrates a crystal resonator and a temperature compensator, which improves the long-term accuracy of the module. In the range of -40°C to +85°C, the accuracy of DS3231 remains at ±3.5ppm (±0.3024 seconds/day).The device incorporates a ...
SparkFun Real Time Clock Module
This is the SparkFun Real Time Clock (RTC) Module, this little breakout that uses the DS1307 to keep track of the current year, month, day as well as the current time. The module comes fully assembled and includes a small CR1225 Lithium coin cell battery that will run the RTC for a minimum of 9 y...
Four - Channels Motor Shield For Arduino
This Adruino compatible motor Driver shield is a full-featured products that it can be used to drive 4 DC motor or two 4-wire stepper and two 5v servo. It drive the DC motor and stepper with the L293D,and it drive the servo with arduino pin9 and pin10. Features Be able to drive 4 DC motor and...
Elecrow Starter Kit for Arduino
The Starter Kit for Arduino is an excellent kit for whom want to learn more about Arduino. This kit include display part, 5 kinds of sensors (vibration sensor, touch sensor, flame sensor, DHT11 Temperature and humidity sensor, soil miosture sensor), DC motor with male Dupont Wire + fan blade a...
Arduino Zero to Hero Kit(Pre-order)
The Arduino Zero to Hero Kit is an open-source electronics learning toolkit that comes with a comprehensive online course created by Australian robotics engineer and teacher Sanjin Dedić. Designed for ambitious beginners and intermediate Arduino users, the course takes you from basic circuitry th...
37 in 1 Sensor Kit for Arduino
A comprehensive collection of 37 different sensors and modules for Arduino, covering a wide range of inputs and outputs for electronics projects. Everything comes neatly organised in a clear plastic storage case. From environmental sensing (temperature, humidity, light) to user input (joystick, ...
SparkFun RGB LED Breakout - WS2812B
This is a breakout board for the WS2812B RGB LED. The WS2812B is actually an RGB LED with a WS2811 built right into the LED! All the necessary pins are broken out to 0.1" spaced headers for easy bread-boarding. Several of these breakouts can even be chained together to form a display or an addres...
2x2A Arduino Motor Shield Twin
The DFRobot 2×2A Motor Shield uses the L298P dual full-bridge driver chip to control two 4.8–35 V DC motors at up to 2 A per channel. It stacks directly onto Arduino Uno and Arduino Mega boards, using PWM pins 10 and 11 for speed control and digital pins 12 and 13 for enable/disable. The shield ...
Photo cell (CdS photoresistor)
CdS cells are little light sensors. As the squiggly face is exposed to more light, the resistance goes down. When its light, the resistance is about 5-10KΩ, when dark it goes up to 200KΩ. To use, connect one side of the photo cell (either one, its symmetric) to power (for example 5V) and the o...
Real Time Clock Module (DS1307) V1.1
The DS1307 Real Time Clock module developed by one of our designers: Waiman. The module comes fully assembled and pre-programmed with the current time (ok, so it's our current time - MST). The included Lithium coin cell battery (CR1225 41mAh) will run the module for a minimum of 9 years (17 ...
Adafruit DS1307 Real Time Clock Assembled Breakout Board
The Adafruit DS1307 Real Time Clock breakout keeps accurate time even when your microcontroller loses power or is reprogrammed. This battery-backed I2C RTC is one of the most widely used clock chips, making it a reliable choice for datalogging, alarms, timers, and clock projects. The DS1307 requ...
Arduino Industrial 101
The Arduino Industrial 101 is a compact WiFi evaluation board based on the Arduino 101 LGA module. Combining an ATmega32U4 microcontroller with an Atheros AR9331 MIPS Linux processor, it provides a powerful platform for IoT projects without the need for multiple shields. Similar to the Arduino Y...
