All Products

SKU: DF-DFR0225

RoMeo V2 [R3] is an All-in-One Arduino based robot board, it is especially designed for robotics applications, and extended devices. Romeo benefits from the Arduino open source platform, it is supported by thousands of open source projects, and can easily be expanded with Arduino Shields. The ...

SKU: DF-DFR0100

INTRODUCTION Welcome to the electronic interaction world! DFRobot proudly presents the Arduino Beginner/Starter Kit for those who are interested in learning about Arduino and electronics. Starting from basic LED control to more advanced environmental sensing, monitoring and actuators. This ki...

SKU: AF-5786

The Adafruit Metro RP2040 brings the Raspberry Pi RP2040 dual-core processor to the standard Metro/UNO shield-compatible form factor. With 16 MB of QSPI flash, a microSD card slot, USB-C, and a rich set of debugging ports, this board is an excellent platform for CircuitPython, Arduino, MicroPytho...

SKU: AF-62

This here is your standard A-B USB cable, for USB 1.1 or 2.0. Perfect for connecting a PC to your Arduino, USBtinyISP (among other things).3 feet / 1 meter longColor may vary!

SKU: AF-4600

The Adafruit QT Py SAMD21 is the original QT Py — a tiny development board built around the ATSAMD21E18 (ARM Cortex-M0+ at 48 MHz) with native USB, a STEMMA QT connector, and an RGB NeoPixel. It's the same chip found in the popular Trinket M0 and GEMMA M0, now in a Seeed Xiao-compatible form fact...

SKU: DF-SEN0217

INTRODUCTION   The Gravity Water Flow sensor measures the rate of a liquid flowing through it. The YF-S201 water flow sensor consists of a plastic valve body, flow rotor and hall effect sensor. It is usually used at the inlet end to detect the amount of flow. When liquid flows throug...

SKU: DF-DRI0039

INTRODUCTION The latest quad motor driver shield for Arduino, compatible with 5V/3.3V Arduino controller, can control up to four DC motors with 8 pins at the same time. The shield supports PWM speed control and polarity control. The driver shield includes two TB6612FNG ...

SKU: SF-COM-09936

A compact 10-segment LED bar graph in yellow. Each segment is an individual LED with its own anode and cathode, making it easy to drive from a microcontroller or shift register. The bar graph format is ideal for displaying levels, progress, or signal strength in a compact footprint. Also availab...

SKU: SF-KIT-14189

The SparkFun Inventor’s Kit (SIK) is a great way to get started with programming and hardware interaction with the Arduino programming language. The SIK includes everything you need to complete 16 circuits that will teach you how to read sensors, display information on an LCD, drive motors, and m...

SKU: SF-KIT-13154

The SparkFun Inventor’s Kit (SIK) is a great way to get started with programming and hardware interaction with the Arduino programming language. The SIK includes everything you need to complete 16 circuits that will teach you how to read sensors, display information on an LCD, drive motors, an...

SKU: DF-KIT0152-EN

MindPlus Coding Kit for Arduino is a set of tools for programming learning. As its compatibility for Mind+, a graphical coding software for starters, and Arduino IDE, this kit is well applicable to students from the lower grade to the higher grade. It comes with an Arduino Uno R3 mainboard and a ...

SKU: SF-COM-09935

A compact 10-segment LED bar graph in red. Each segment is an individual LED with its own anode and cathode, making it easy to drive from a microcontroller or shift register. The bar graph format is ideal for displaying levels, progress, or signal strength in a compact footprint. Also available ...

SKU: SF-COM-09937

A compact 10-segment LED bar graph in blue. Each segment is an individual LED with its own anode and cathode, making it easy to drive from a microcontroller or shift register. The bar graph format is ideal for displaying levels, progress, or signal strength in a compact footprint. Also available...

SKU: SF-COM-09938

A compact 10-segment LED bar graph in green. Each segment is an individual LED with its own anode and cathode, making it easy to drive from a microcontroller or shift register. The bar graph format is ideal for displaying levels, progress, or signal strength in a compact footprint. Also availabl...

SKU: SF-WRL-12775

This is the SparkFun RFM69 Breakout, a small piece of tech that breaks out all the pins available on the RFM69HCW module as well as making the transceiver easy to use. The RFM69HCW is an inexpensive and versatile radio module that operates in the unlicensed ISM (Industry, Science and Medicine)...

SKU: SF-WRL-12823

This is the SparkFun RFM69 Breakout, a small piece of tech that breaks out all the pins available on the RFM69HCW module as well as making the transceiver easy to use. The RFM69HCW is an inexpensive and versatile radio module that operates in the unlicensed ISM (Industry, Science and Medicine)...

SKU: DF-SEN0188

INTRODUCTION This is an Arduino compatible fingerprint module. With the high speed DSP processor, it could also work with other serial device, like MSP430, 51, AVR, PIC, STM32, ARM and FPGA device. This fingerprint module could work alone without any principal computer ...

SKU: AF-2217

The Adafruit Audio FX Sound Board with 2×2W Amp is a standalone audio trigger with a built-in stereo Class D amplifier — no Arduino or programming required. Simply drag and drop WAV or OGG sound files over USB, wire up buttons and speakers, and you're ready to go. With 16 MB of built-in flash, it...

SKU: AF-2210

The Adafruit Audio FX Sound Board with 2×2W Amp is a standalone audio trigger with a built-in stereo Class D amplifier — no Arduino or programming required. Simply drag and drop WAV or OGG sound files over USB, wire up buttons and speakers, and you're ready to go. With 2 MB of built-in flash, it ...

SKU: AF-937

This handy USB extension cable will make it easy for you to enclose a device that has a micro-B type port. We think this would be most handy when putting an Arduino Leonardo or Raspberry Pi in a box.The jack half has two mounting 'ears' with M3 screws installed, ~1.1" / ~29mm apart. Can be use...