All Products
AI Overview
Here are the most useful picks for “audio,” grouped by common needs:
Add audio I/O to a microcontroller / SBC
- I2S DAC + built-in headphone/speaker drive: TLV320DAC3100 I2S DAC with Headphone & Speaker Out (I2S, headphone out + mono 4–8Ω speaker support) — $17.10
- Full stereo codec (input + output): WM8960 Audio Codec Breakout with Headers (Qwiic) (I2S ADC + DAC, Qwiic/I2C control) — $34.10
- Raspberry Pi line-out (I2S): Audio DAC SHIM (Line-Out) (slim line-level output for amps/powered speakers) — $31.00
- Teensy audio: Audio Adapter Board for Teensy 4.0 (16-bit / 44.1kHz “CD-quality” audio) — $38.50
Wireless / playback modules
- Bluetooth stereo streaming module: Roving Networks RN-52 Wireless Audio Module (embedded wireless audio streaming) — $51.65
- Bluetooth receiver + USB/TF playback: Bluetooth Audio Receiver and Playback Module (plays MP3/WMA/WAV/FLAC, built-in preamp) — $24.85
Amplification + speakers
- Simple amp module: 386AMP Audio Amplifier Module (Arduino compatible) (LM386-based, 26 dB gain) — $20.95
- Tiny project speaker: Mini Speaker - 1W 8 Ohm (1W, 8Ω, very compact) — $2.30
- Raspberry Pi amplified speaker output: Adafruit I2S 3W Stereo Speaker Bonnet for Raspberry Pi [Mini Kit] (I2S, 3W stereo amp) — $27.95
Microphones (audio input)
- USB plug-and-play mic: Mini USB Microphone (driverless USB mic for PCs/Raspberry Pi) — $13.25
- Digital I2S mic: I2S MEMS Microphone Breakout - ICS-43434 (I2S digital audio) — $12.15
- Analog mic + adjustable gain preamp: Electret Microphone Amplifier - MAX4466 with Adjustable Gain (great for MCU analog input) — $14.45
Cables / connectors
- Standard AUX cable: Stereo 3.5mm Plug/Plug Audio Cable - 6 feet (3.5mm TRS, 6 ft) — $7.30
What kind of audio are you working with?
Showing 1-20 of 51 products · 9 unavailable products hidden
MY1690X-16S Serial MP3 Player Shield for Arduino
·
Add stand-alone audio playback to an Arduino project with this serial MP3 player shield based on the MY1690X decoder IC. It can play MP3 and WAV files from a standard microSD card, making it handy for music, voice prompts and sound effects.The shield is controlled over a serial UART command set a...
Adafruit PCM5100 I2S DAC with Line Level Output - 100dB SNR
·
The Adafruit PCM5100 I2S DAC converts digital I2S audio into clean, high-quality stereo line-level output through a 3.5mm jack. With 100dB signal-to-noise ratio and no MCLK or I2C configuration required, simply pipe I2S data in and get great-sounding analogue audio out. The PCM5100 accepts 16, 2...
Adafruit Audio FX Sound Board - WAV/OGG Trigger - 2MB storage - Headphone out only
The Adafruit Audio FX Sound Board is a standalone audio trigger that plays WAV and OGG Vorbis files — no Arduino or programming required. Simply drag and drop sound files over USB, wire up buttons to the trigger pins, and you're ready to go. With 2 MB of built-in flash storage, it holds a few min...
Adafruit PCM5122 I2S DAC with Line Level Output - HW, I2C or SPI
·
The Adafruit PCM5122 I2S DAC delivers excellent stereo line-level audio with 112dB SNR and -93dB THD. Out of the box it works in hardware mode — just pipe I2S audio in with no MCLK or configuration needed. For advanced control, switch to I2C or SPI mode to access software volume, EQ, filtering, a...
Audio BLE/SPP Pass-through Module - Bluetooth 5.0
INTRODUCTIONThis Bluetooth module features Bluetooth/U-disk/TF-card playback, and Bluetooth call function, supporting simple and clear serial port control function, BLE pass-through, and SPP pass-through functions. The highlight of this product is the dual-mode Bluetooth, which also means that it...
Evaluation Board for Audio BLE/SPP Pass-through Module - Bluetooth 5.0
An evaluation board for a dual-mode Bluetooth 5.0 module that handles both wireless audio and serial data pass-through simultaneously. It can play audio from U-disk or TF card, stream audio over Bluetooth, handle Bluetooth call control, and run BLE or SPP data pass-through — all at the same time,...
Adafruit Audio FX Sound Board - WAV/OGG Trigger - 16MB storage with 2x2W Amp
The Adafruit Audio FX Sound Board with 2×2W Amp is a standalone audio trigger with a built-in stereo Class D amplifier — no Arduino or programming required. Simply drag and drop WAV or OGG sound files over USB, wire up buttons and speakers, and you're ready to go. With 16 MB of built-in flash, it...
HIFI DAC Audio Sound Card Module I2S interface for Raspberry Pi
A high-fidelity DAC expansion board for Raspberry Pi that delivers superior audio quality over the Pi's built-in 3.5mm output. Built around Texas Instruments' PCM5122 DAC chip, this board connects via the I2S interface and supports up to 384kHz sampling with 112dB dynamic range — ideal for buildi...
TLV320DAC3100 I2S DAC with Headphone & Speaker Out
·
Add high-quality amplified I2S digital audio to your project with this TLV320DAC3100 breakout. It provides clean stereo audio for 16Ω headphones and/or mono speaker output for a 4Ω-8Ω speaker, making it handy for compact audio builds without a separate amplifier.The board takes BCLK, WSEL and DIN...
Audio Adapter Board for Teensy 3.0 - 3.2, 3.5 and 3.6
This audio adapter lets you easily add high quality 16 bit, 44.1 kHz sample rate (CD quality) audio to your projects with a Teensy 3.2, 3.5 or 3.6. It supports stereo headphone and stereo line-level output, and also stereo line-level input or mono microphone input.The audio chip connects to Te...
Roving Networks RN-52 Wireless Audio Module
·
The RN-52 is a compact wireless audio module designed to make high quality stereo audio streaming easier to add to embedded projects. It suits hands-free car audio, remote media centre control, and 2-channel audio streaming applications.Configuration and control are handled with a simple ASCII co...
Audio Adapter Board for Teensy 4.0
This audio adaptor lets you easily add high quality 16 bit, 44.1 kHz sample rate (CD quality) audio to your projects with Teensy 4.0 (Rev D). It supports stereo headphone and stereo line-level output, and also stereo line-level input or mono microphone input. The Teensy Audio Library lets...
Pirate Audio Speaker for Raspberry Pi
Pump out some mini beats with Pirate Audio Speaker! This diminutive sound system has an I2S DAC, amp, mini mono speaker, high-res display, and playback control buttons. Pirate Audio Speaker is perfect for making a Lilliputian radio, sound effect player, or even as a teeny-weeny games console! ...
3.5mm to 6.5mm Jack Audio Adapter for Guitar Amplifier / Speaker / Headphone
This 3.5mm to 6.5mm audio jack adapter allows you to connect devices with a standard 3.5mm audio plug (such as headphones, phones, tablets, or laptops) to equipment with a 6.35mm (6.5mm) jack socket, including guitar amplifiers, mixers, speakers, and professional audio equipment.The adapter provi...
LilyPad MP3
The LilyPad MP3 Player is an all-in-one audio board combining an Arduino-compatible microcontroller, MP3 decoder, microSD card socket, and stereo amplifier. Part of the LilyPad e-textiles line, it's designed to add music and sound effects to fabric creations, wearables, and interactive projects. ...
Bluetooth Audio Receiver and Playback Module
This Bluetooth audio receiver module supports wireless streaming, USB flash drive, and TF (microSD) card playback. It decodes MP3, WMA, WAV, and lossless FLAC audio formats, with a built-in pre-amp output capable of driving headphones or a small 3 W speaker directly. Powered by 5 V DC via Micro-...
3.5mm (1/8) 4-Pole (TRRS) Audio Jack Terminal Block
A 3.5 mm (1/8") 4-pole TRRS audio jack with screw terminal connections — no soldering required. Use stranded or solid-core wire and a small screwdriver to create custom audio wiring jigs, breakouts, and test setups. TRRS stands for Tip, Ring, Ring, Sleeve, providing four contacts: three signal l...
3.5mm (1/8) 4-Pole (TRRS) Audio Plug Terminal Block
A 3.5 mm (1/8") 4-pole TRRS audio plug with screw terminal connections — no soldering required. Use stranded or solid-core wire and a small screwdriver to create custom audio cables, breakouts, and test leads. TRRS stands for Tip, Ring, Ring, Sleeve, providing four contacts: three signal lines a...
Mini External USB Stereo Speaker
Add some crisp and compact audio to your project with this Mini External USB 2.0 Speaker. It's USB-only and does not require or use a 3.5mm audio jack. You'll get great audio, even with a device that doesn't have a head phone jack. And since it is powered over USB, there's no need to char...
USB Type C Headphone Jack Adapter , Audio Adapter Aux to USB-C Dongle Cable Cord
Introducing our cutting-edge USB Type C Headphone Jack Adapter! This innovative audio adapter allows you to easily connect your favorite headphones to any device with a USB-C port. Say goodbye to the hassle of carrying around multiple adapters for different headphone types - with our USB-C dongle...
