All Products

SKU: LB-LR0120-PI4

This 5-inch HDMI TFT LCD touch screen is designed for Raspberry Pi 4, plugging directly onto the GPIO header with an HDMI connection for an 800×480 resolution display with SPI-based touch input. It draws power from the Pi's GPIO pins, so no separate power supply is needed. The display uses HDMI ...

SKU: DF-FIT0950

This 7" IPS touch display connects to the LattePanda Mu and LattePanda Sigma via eDP (Embedded DisplayPort) interface, delivering excellent visual quality with 1024×600 resolution and full viewing angle support. The multi-touch panel features 6H surface hardness for scratch resistance and a fully...

SKU: WS-24484

The Waveshare 10.1" Wide Colour Gamut Capacitive Touch Display delivers vibrant visuals with an NTSC 82% colour gamut IPS panel at 1280×800 resolution and 178° viewing angles. The optically bonded toughened glass touch panel (6H hardness) supports up to 10-point capacitive touch, while the alumin...

SKU: DF-FIT0955 · MPN: FIT0955

An 11.6-inch 1920×1080 IPS touch display that connects directly to LattePanda single-board computers via eDP (Embedded DisplayPort). The ultra-thin, narrow-bezel design and multi-touch input make it well suited for portable projects, kiosks, and human-machine interface (HMI) applications. The eD...

SKU: LB-LR0120

This 5-inch HDMI TFT LCD touch screen plugs directly onto a Raspberry Pi via the GPIO header and HDMI connector, providing an 800×480 resolution display with SPI-based touch input. It draws power from the Pi's GPIO pins, so no separate power supply is needed. The display connects via HDMI for vi...

SKU: DF-FIT1030 · MPN: FIT1030

This 7-inch multi-touch display is made specifically for the LattePanda IOTA and LattePanda 3 Delta single-board computers. It connects over eDP (Embedded DisplayPort), using the native display output on those boards for a cleaner setup than a generic HDMI screen.The IPS panel provides a 1024 x 6...

SKU: PR-PIM272

Six touch-sensitive buttons to use for whatever your heart desires, with added LEDs (did you expect anything less?) Touch pHAT has six capacitive touch buttons, each with a bright white LED, designed to be completely agnostic about what they're used for. You can even use a dry erase pen to wri...

SKU: WS-24155

A 1.28-inch round IPS LCD display module with an integrated capacitive touch panel. Featuring 240×240 resolution and 65K colours, the circular form factor is ideal for smartwatch-style interfaces, gauge displays, and interactive dashboards. Built around the GC9A01 display driver (SPI) and CST816...

SKU: AF-2340

The Adafruit Capacitive Touch HAT adds 12 capacitive touch sensors to your Raspberry Pi using the MPR121 touch controller over I2C. Each sensor has a figure-8 hole designed for alligator clip connections — attach clips to the HAT and the other end to anything conductive (metal, fruit, vegetables,...

SKU: SF-SEN-14520

The SparkFun Capacitive Touch Breakout provides a single momentary touch button using the AT42QT1011 capacitive sense chip. Simply supply 1.8–5 V and ground — the chip handles all touch monitoring and outputs a digital high signal when a touch is detected, low when released. Unlike the AT42QT101...

SKU: PR-PIM280

Six touch-sensitive buttons to use for whatever your heart desires, with added LEDs (did you expect anything less?) Touch pHAT has six capacitive touch buttons, each with a bright white LED, designed to be completely agnostic about what they're used for. You can even use a dry erase pen to wri...

SKU: WS-23739

The Waveshare 10.1" Capacitive Touch Display features an optically bonded IPS panel with 1280×800 resolution and 178° viewing angles. The toughened glass touch panel (6H hardness) supports up to 10-point capacitive touch via USB-C, and the optical bonding process improves display clarity while ke...

SKU: WS-24483

This 8" capacitive touch display features a wide colour gamut IPS panel (82% NTSC) at 1280×800 resolution with 178° viewing angles. The optically bonded toughened glass panel provides clear, dust-resistant visuals with up to 6H hardness. It connects via HDMI or USB Type-C for both video and touch...

SKU: AF-4830

The Adafruit MPR121 Gator Breakout adds 12 capacitive touch inputs to any microcontroller project — no soldering required. With large alligator/croc-clip friendly pads and STEMMA QT / Qwiic connectors, simply clip conductive materials to the pads and plug into your board's I2C port. The MPR121 h...

SKU: DF-FIT0478

This capacitive touch panel overlay adds touch input to your LattePanda 7" IPS Display (sold separately). Simply apply the adhesive panel over the display, connect the FPC cable, and power the board for a complete touch interface. The panel features 6H surface hardness for scratch resistance, 85...

SKU: PR-PIM400

A 128x64 pixel, 2.15" LCD display with snazzy six-zone RGB backlight and six capacitive touch buttons. GFX HAT makes an ideal display and interface for your headless Pi projects. GFX HAT riffs off our beloved Display-O-Tron HAT, but gives you the flexibility of individual pixels, letting you d...

SKU: WS-31957 · MPN: 31957

Unleash Your Creativity with the ESP32-S3 2.06inch AMOLED Touch Watch Development Board Take your wearable tech designs to the next level with the powerful and versatile ESP32-S3 2.06inch AMOLED Touch Watch Development Board. This sleek, cutting-edge development tool is crafted for tinkerers, dev...

SKU: M5-U026

The M5Stack 16-Key Capacitive Touch Unit is a Makey Makey-inspired input device built around an ATmega328P microcontroller. It detects capacitive touch across 16 key pads, allowing you to turn everyday objects — fruit, foil, water, or anything conductive — into touch-sensitive buttons. A built-in...

SKU: AF-1982

The Adafruit MPR121 Capacitive Touch Sensor Breakout provides 12 channels of capacitive touch sensing over I2C. The MPR121 handles all the capacitive filtering internally and can be configured for varying sensitivity levels, making it far easier to use than raw analog capacitive sensing. With fo...

SKU: AF-2024

The Adafruit Capacitive Touch Shield brings 12 channels of capacitive touch sensing to any Arduino using the MPR121 chip. Each sensor has a "figure 8" pad with holes designed for quick alligator clip connections — attach one end to the shield and the other to any conductive object like metal, fru...