All Products
Showing 1-20 of 60 products
SparkFun Full-Bridge Motor Driver Breakout - L298N
SparkFun Serial Controlled Motor Driver
L298N Dual H-Bridge Motor Driver Board
Full-Bridge Motor Driver Dual - L298N
SparkFun Motor Driver - Dual TB6612FNG (1A)
PD Stepper NEMA 17 USB-C PD Driver and Controller
MPN: ROB-30118
SparkFun Ardumoto - Motor Driver Shield
MDV 2x2A DC Motor Controller
MotoMama
2x2A DC Motor Shield For Arduino
Motor Drive-L298N
Hobby Motor with Encoder - Plastic Gear (Red)
MPN: ROB-31141
2x2A Arduino Motor Shield Twin
2x1.2A DC Motor Driver with Gravity Connector (TB6612FNG)
SparkFun Haptic Motor Driver - DRV2605L
SparkFun Motor Driver - Dual TB6612FNG (with Headers)
Adafruit TB6612 1.2A DC/Stepper Motor Driver Breakout Board
Dual Channel H-Bridge Motor Shield-V1.5
SparkFun Ardumoto Shield Kit
All-in-one Robotics Board for BBC micro:bit
SparkFun Full-Bridge Motor Driver Breakout - L298N
This is a breakout board for the L298N full-bridge dual motor driver; which comes in a staggered, Multiwatt package. All pins of the L298N are broken out to a 15-pin 0.1" pitch header. Two mounting holes are also provided. Dimensions: Board: 1.6x0.85 inches Documents: Schematic Eagle...
SparkFun Serial Controlled Motor Driver
The SparkFun Serial Controlled Motor Driver allows you to control up to two DC motors using a serial command interface. The serial interface is easy to use and it lets the user select an individual motor, the direction, and the desired speed constant (up to 10 different speed from stop to full sp...
L298N Dual H-Bridge Motor Driver Board
Using the powerful L298N Dual Motor Driver，this module allows full control of two DC Motors or one stepper-motor. Screw Terminals for easy connections；LEDs show power and output status. Requires six digital inputs. Has 4 mounting holes. Specification: Chip: L298N Maximum Output Curre...
Full-Bridge Motor Driver Dual - L298N
The LN298 is a high voltage, high current, dual full-bridge motor driver designed to accept standard TTL logic levels and drive inductive loads such as relays, solenoids, DC and stepping motors. Comes in a staggered, 15-lead Multiwatt package. Check below for a breakout board. Features: O...
SparkFun Motor Driver - Dual TB6612FNG (1A)
The SparkFun TB6612FNG Motor Driver breakout can independently control up to two DC motors at a constant current of 1.2 A (3.2 A peak). Each motor channel supports four modes — clockwise, counter-clockwise, short-brake, and stop — controlled via two input signals and a PWM speed input. All pins ...
PD Stepper NEMA 17 USB-C PD Driver and Controller
·
Stepper motor builds often need a microcontroller, a separate driver, a 12V or 24V supply and plenty of wiring. This compact controller from Things by Josh brings that stack together in one unit designed to mount directly to the back of a standard NEMA 17 stepper motor.Power comes in via USB-C Po...
SparkFun Ardumoto - Motor Driver Shield
The Ardumoto Shield is a dual-motor controller for Arduino based on the L298 H-bridge. It can drive two DC motors at up to 2A per channel, making it an excellent platform for RC vehicles and small autonomous robots. The board draws power from the Arduino's Vin line and includes blue and yellow L...
MDV 2x2A DC Motor Controller
A dual H-bridge DC motor controller based on the L298N driver chip, capable of driving two bi-directional DC motors at up to 2 A per channel. The module accepts a wide motor supply voltage of 4.8–46V and includes high-speed protection diodes and an enlarged heatsink for improved thermal performan...
MotoMama
MotoMama is an Arduino shield built around the L298N H-bridge driver chip for small motor and robot projects. It can drive two DC motors or one four-wire, two-phase stepper motor.Motor power can be supplied through the onboard power terminal, which can also power the Arduino board. Alternatively,...
2x2A DC Motor Shield For Arduino
The DFRobot 2×2A DC Motor Shield uses the L298P dual full-bridge driver chip to control two DC motors at up to 2 A per channel. It stacks directly onto Arduino Uno and Arduino Mega boards, using PWM pins 5 and 6 for speed control and digital pins 4 and 7 for enable/disable. The shield can be pow...
Motor Drive-L298N
IntroductionThe L298N is a high voltage and high current dual full-bridge drive in a 15-lead Multiwatt and PowerSO20 packages. It features: high operating supply voltage up to 46V; large DC current, peak instantaneous current up to 3A, continuous operating current as 2A; rate power: 25W.It has tw...
Hobby Motor with Encoder - Plastic Gear (Red)
·
Add motion and feedback to small robotics builds with this single DC gearmotor and integrated Hall effect speed encoder. Instead of simply driving a motor open-loop, your microcontroller can count encoder pulses to track wheel rotation and speed for more accurate navigation and speed control.The ...
2x2A Arduino Motor Shield Twin
The DFRobot 2×2A Motor Shield uses the L298P dual full-bridge driver chip to control two 4.8–35 V DC motors at up to 2 A per channel. It stacks directly onto Arduino Uno and Arduino Mega boards, using PWM pins 10 and 11 for speed control and digital pins 12 and 13 for enable/disable. The shield ...
2x1.2A DC Motor Driver with Gravity Connector (TB6612FNG)
The DFRobot 2×1.2A DC Motor Driver with Gravity Connector is a compact dual-channel motor driver based on the TB6612FNG IC. This version features standard DFRobot Gravity connectors for plug-and-play wiring with Gravity-compatible expansion boards — no soldering or breadboard needed. Each channe...
SparkFun Haptic Motor Driver - DRV2605L
The SparkFun Haptic Motor Driver breakout board features the Texas Instruments DRV2605L, providing an easy way to add tactile feedback to your projects. Connect a vibration motor, communicate over I2C from any Arduino-compatible microcontroller, and trigger a library of haptic effects. The DRV26...
SparkFun Motor Driver - Dual TB6612FNG (with Headers)
The TB6612FNG Motor Driver can control up to two DC motors at a constant current of 1.2A (3.2A peak). Two input signals (IN1 and IN2) can be used to control the motor in one of four function modes: CW, CCW, short-brake and stop. The two motor outputs (A and B) can be separately controlled, and t...
Adafruit TB6612 1.2A DC/Stepper Motor Driver Breakout Board
The Adafruit TB6612 Breakout is a compact dual H-bridge motor driver that can spin two DC motors bidirectionally, step one bipolar or unipolar stepper, or fire two solenoids — all at up to 1.2A continuous per channel (3A peak). It's the same driver chip used in the Adafruit Motor Shield and Motor...
Dual Channel H-Bridge Motor Shield-V1.5
The Dual Channel H-Bridge Motor Shield is composed of 2 discrete MOSFET H-bridge, designed to drive two DC motor with max current 8A. It is made up of 8 N-channel MOSFET IRF3205S and 4 pcs of half bridge motor controller IR2104, to build 2 H-bridge. With this shield and the Arduino board, users c...
SparkFun Ardumoto Shield Kit
Robots are fun, and Arduinos are easy. So wouldn’t it be nice if there were a kit that included everything you need to get your Arduino device set up to control a simple two-motor-circuit buddy? The SparkFun Ardumoto Shield Kit is perfect for any robot enthusiast and includes an Ardumoto Shield, ...
All-in-one Robotics Board for BBC micro:bit
Take your micro:bit robotics builds to the next level with the Kitronik All-in-one Robotics Board. This all-in-one control solution lets the BBC micro:bit drive up to 4 motors (or 2 stepper motors) and 8 servos, making it the perfect foundation for a wide variety of robotics projects. The board ...
