All Products

SKU: SF-DEV-13746

The SparkFun Beefy 3 is an FTDI Basic Breakout board based on the FT231X USB-to-serial IC. Unlike standard FTDI breakouts, it features an AP2112K voltage regulator capable of supplying up to 600mA at 3.3V — enough to power a 3.3V project directly from the board's USB connection. The 6-pin header...

SKU: SF-DEV-09873

The SparkFun FTDI Basic Breakout provides USB-to-serial conversion using the FTDI FT232RL IC, operating at 3.3V logic levels. Its 6-pin header matches the standard FTDI pinout, making it compatible with Arduino Pro, LilyPad, and other 3.3V boards that use the FTDI connector. The board brings out...

SKU: SF-KIT-18289

The SparkFun 3.3V FTDI Starter Kit gives you just what you need to get started with FTDI FT232RL USB to serial IC. The pinout of the included board matches the FTDI cable standard to work with official Arduino and cloned 3.3V Arduino boards. It can also be used for general serial applications. Th...

SKU: SF-DEV-09716

This is the newest revision of our FTDI Basic. We now use a SMD 6-pin header on the bottom, which makes it smaller and more compact. Functionality has remained the same. This is a basic breakout board for the FTDI FT232RL USB to serial IC. The pinout of this board matches the FTDI cable to wo...

SKU: DF-DFR0065

This is a basic breakout board for the FTDI FT232RL USB to serial IC. The pinout of this board matches the FTDI cable to work with official Arduino and cloned 3.3V Arduino boards. It can also be used for general serial applications. The major difference with this board is that it brings ...

SKU: SF-DEV-15096

This SparkFun Serial Basic Breakout is an easy-to-use USB-to-Serial adapter based on the CH340G and takes advantage of the handy USB-C connector. With USB-C you can get up to three times the power delivery over the previous USB generation at 1.5A and and also solves the universally frustrating di...

SKU: SF-DEV-14050

The SparkFun Serial Basic Breakout is an easy-to-use USB-to-Serial adapter based on the CH340G IC from WCH. It works with 5V and 3.3V systems and should auto install on most operating systems without the need for additional drivers. The Serial Basic uses the CH340G IC to quickly and easily con...

SKU: SF-BOB-12731

This is the SparkFun USB to Serial Breakout for the FT232RL, a small board with a built in USB to serial UART interface. This little breakout is built around the FT232RL IC from FTDI, with an internal oscillator, EEPROM, and a 28-pin SSOP package this is a serious little chip. With this version...

SKU: SF-BOB-11083

The SparkFun FM Tuner Basic Breakout is built around the Silicon Labs Si4703 FM tuner IC, providing a full-featured FM radio receiver on a compact breakout board. Beyond standard FM reception, the Si4703 supports Radio Data Service (RDS) and Radio Broadcast Data Service (RBDS), enabling display o...

SKU: SF-BOB-13906

The SparkFun Multiplexer Breakout provides access to all pins and features of the 74HC4051, an 8-channel analog multiplexer/demultiplexer. The 74HC4051 allows you to turn four I/O pins into eight multifunctional, individually selectable signals, which can be used to do everything from driving eig...

SKU: SF-BOB-10124

This is a breakout board for the SP3485 RS-485 transceiver IC, which will convert a UART serial stream to RS-485. The SP3485 is a half-duplex transceiver, so it can only communicate one way at a time, but it can reach transmission speeds of up to 10Mbps. This board requires a very low amount o...

SKU: SF-COM-27909 · MPN: COM-27909

This compact module provides a USB to serial UART interface using the FT231X family, making it a straightforward way to add USB connectivity to UART-based projects.It supports full modem control and works as a USB to UART bridge for embedded boards, prototypes and test setups that need reliable s...

SKU: SF-DEV-11814

The µUSB-PA5 is a compact USB-to-Serial TTL UART bridge based on the FTDI FT232RQ. It connects to your PC via a Mini-B USB connector and provides serial communication at baud rates up to 3 Mbps — designed primarily for programming and communicating with 4D Systems displays and controllers. The 5...

SKU: SF-BOB-11189

The ‘must have’ IC for TTL/CMOS projects finally has its own breakout board! This is the RS232 converter IC that is capable of running at 3V and communicating with 5V logic.We’ve taken the SOIC package MAX3232 and broken out all the pins you need to set up your RS232 to TTL connection. We’ve also...

SKU: SF-KIT-13815

Your 5V system can wield great power with this big, beefy relay board. How does 20A on the NC contacts and 10A on the NO contacts at 220VAC sound? The SparkFun Beefcake Relay Control Kit contains all the parts you need to get your high-power load under control. Only minimal assembly is required! ...

SKU: SF-BOB-13263

Introducing the 3.3V SparkFun FT231X Breakout board, complete with the full UART hardware handshake feature! The pin-out of this board matches the FTDI cable to work with official Arduino and cloned 3.3V Arduino boards. It can also be used for general serial applications.This board still brings o...

SKU: SF-SEN-14520

The SparkFun Capacitive Touch Breakout provides a single momentary touch button using the AT42QT1011 capacitive sense chip. Simply supply 1.8–5 V and ground — the chip handles all touch monitoring and outputs a digital high signal when a touch is detected, low when released. Unlike the AT42QT101...

SKU: SF-DEV-11113

It’s blue! It’s thin! It’s the Arduino Pro Mini! SparkFun’s minimal design approach to Arduino. This is a 5V Arduino running the 16MHz bootloader. Arduino Pro Mini does not come with connectors populated so that you can solder in any connector or wire with any orientation you need. We recommen...

SKU: SF-WRL-13231

The SparkFun ESP8266 Thing is a breakout and development board for the ESP8266 WiFi SoC — a popular platform for IoT and WiFi-connected projects. All module pins are broken out to breadboard-compatible rows, and on-board power management includes a LiPo charger, 3.3V regulator, and power switch. ...

SKU: SF-COM-11629

A smart 4-digit 7-segment display that combines a classic white LED display with an onboard ATmega328 microcontroller. Instead of wiring up dozens of pins, you control the entire display over Serial TTL, SPI, or I2C — using just a few connections. The ATmega328 comes pre-loaded with the Arduino ...