All Products

SKU: SF-PRT-08235

Screw Terminals with 3.5mm pitch pins. Comes in 2 or 3 positions and have the really cool feature of slide-locking together to form any size you need (4, 5, up to 20 without problems). Rated up to 125V @ 6A. Terminal can accept 30 to 20AWG wire. 3.5mm/138mil pin pitch will not fit standard 0.1" p...

SKU: AF-801

The Adafruit Prototyping Pi Plate Kit snaps onto your Raspberry Pi and provides a generous prototyping area with all GPIO, I2C, SPI, and power pins broken out to labelled 0.1" strips and 3.5 mm screw-terminal blocks. It's designed for the original Pi Model A/B but also works with any 40-pin Pi (A...

SKU: AF-724

Screw terminal blocks are the clean, maintainable solution for PCB-to-wire connections — no solder, no loose ends, easy to swap out later. These 3.5mm pitch 2-pin blocks are a practical size: wide enough for a range of wire gauges, compact enough not to dominate your board, and designed to snap t...

SKU: EC-MCS01110

The Screw Shield extends all pins of the Arduino out to 3.5mm pitch screw terminals. It also has a lot of the utility provided by Arduino Protoshield, including: a large prototyping space of both connected and unconnected 0.1" spaced through-holes, a couple 5V and GND busses, a reset button, and ...

SKU: SF-PRT-15519

This is a Screw Terminal with 3.5mm pitch pins. Comes in 2, 3, or 4 positions and have the really cool feature of slide-locking together to form any size you need (4, 5, up to 20 without problems). Rated up to 125V @ 6A. Terminal can accept 30 to 20AWG wire. 3.5mm/138mil pin pitch will not fit st...

SKU: SF-PRT-08084

Screw Terminals with 3.5mm pitch pins. Comes in 2 or 3 positions and have the really cool feature of slide-locking together to form any size you need (4, 5, up to 20 without problems). Rated up to 125V @ 6A. Terminal can accept 30 to 20AWG wire. 3.5mm/138mil pin pitch will not fit standard 0.1" p...

SKU: AF-3289

The Pimoroni Automation HAT is a versatile home automation and industrial control board for the Raspberry Pi. With relays, analogue channels, powered outputs, and buffered inputs — all 24V tolerant — it provides a comprehensive I/O platform for monitoring and controlling real-world devices. Each...

SKU: PR-PIM213

The Pimoroni Automation HAT is a versatile home automation and monitoring controller for the Raspberry Pi. It provides relays, analogue inputs, buffered digital inputs, and powered outputs — all 24 V tolerant — with indicator LEDs on every channel for at-a-glance status monitoring. Connects to t...

SKU: PR-PIM371

The automation:bit is a micro:bit expansion board for controlling and monitoring low-voltage systems up to 24 V. It features analogue and digital inputs, sinking outputs, and a relay — all accessible via 3.5 mm screw terminals. No soldering required. Program it using the block-based Microsoft Ma...

SKU: SF-SEN-13637

A simple breakout board for measuring moisture in soil and similar materials. The two large exposed pads act as probes — functioning as a variable resistor where higher moisture means better conductivity, lower resistance, and a higher signal output. This version includes a 3-pin screw terminal p...

SKU: LB-LS2575

A 100-piece prototyping kit with everything you need to take a breadboard project to a soldered prototype. Includes a selection of PCBs in four sizes, straight and right-angle headers, female headers, screw terminal blocks, and jumper caps — all organised in a plastic storage box. Key Features ...

SKU: AF-5095

A screw-terminal breakout module for the Raspberry Pi Pico, designed for industrial, robotics, and prototyping applications where secure, tool-free wiring is essential. Every GPIO pin is broken out to labelled terminal blocks, making it easy to connect sensors, displays, motors, and other periphe...

SKU: LB-LS3938

This terminal block breakout module comes fully assembled and soldered, ready for use with Raspberry Pi boards.It is compatible with Raspberry Pi 1 Model B+, Pi 2 Model B, Pi 3 Model B, Pi 3 Model B+, Pi 4 Model B, Pi Zero, and Pi Zero W.The module features 2.54 mm (0.1″) pitch terminal blocks su...

SKU: PR-PIM214

The Automation pHAT is a compact home monitoring and automation controller for Raspberry Pi in the smaller pHAT form factor. With a relay, three analogue channels, buffered inputs, and sinking outputs — all 24V tolerant — it packs serious control capability into a minimal footprint. Uses the sam...

SKU: AF-2136

A compact 3-pin screw terminal block with 2.54mm (0.1") pitch, designed to fit directly into perfboard and protoboards. Terminal blocks provide reliable, tool-adjustable PCB-to-wire connections that are easy to maintain and reconfigure. The screw terminals accept a range of wire gauges and are t...

SKU: AF-5768

The Adafruit RP2040 Prop-Maker Feather is an all-in-one board designed for building props, cosplay pieces, lightsabers, animatronics, and interactive toys. It combines the RP2040 microcontroller with a prop-making toolkit — I2S audio amplifier, NeoPixel driver with level shifting, accelerometer, ...

SKU: AF-1799

A solder-on 3.5 mm (1/8") TRRS plug for building custom audio cables. Made from durable metal with a flexible spring strain relief, it provides a solid, professional-quality connection. Solder your wires to the four contact points and you have a custom cable ready to go. TRRS stands for Tip, Rin...

SKU: LB-LS7440

A 30cm breakout cable with a USB-C plug on one end and clearly labelled screw terminals on the other. Provides easy access to power and data lines for prototyping, enclosures, and custom installations without soldering. Key Features USB-C to Screw Terminal – Easy access to VBUS, GND, and data ...

SKU: AF-6066 · MPN: ADA6066

The Adafruit Pixel Shifter is a simple inline level-shifting board for addressable LEDs like NeoPixels (WS2812, SK6812) and similar one-wire-control pixels. It solves the common problem of 3.3V microcontrollers not being able to reliably drive 5V LED strips — no more flickering or strange colour ...

SKU: AF-1800

A solder-on 3.5 mm (1/8") stereo audio plug for building custom audio cables. Made from durable metal with a flexible spring strain relief, it provides a solid, professional-quality connection. Solder your wires to the three contact points and you have a custom cable ready to go. Key Features ...