Little Bird
100 piece Prototyping Kit
All Products
Beginner's Electronics Kits
New Arrivals
Complete Kits & Projects
Circuitry & IOT
Electronics Kits
Jumpers & Wires
Prototyping
Digital Technologies
$10.90
$19.00
Save 43%
|
Only 5 left
A 100-piece prototyping kit with everything you need to take a breadboard project to a soldered prototype. Includes a selection of PCBs in four sizes, straig...
Get notified when back in stock
Estimated Delivery
Arrives
Disclaimer
Secure checkout
A 100-piece prototyping kit with everything you need to take a breadboard project to a soldered prototype. Includes a selection of PCBs in four sizes, straight and right-angle headers, female headers, screw terminal blocks, and jumper caps — all organised in a plastic storage box.
Key Features
- 30 PCBs in 4 Sizes – From compact 2×8cm to spacious 5×7cm boards
- FR4 Fibreglass – High-quality pre-tinned boards with 2.54mm hole pitch
- Headers Included – Straight male, right-angle male, and female connectors
- Screw Terminals – 2-pin and 3-pin blocks for secure wire connections
- Mounting Holes – Corner holes on all PCBs for easy installation
Specifications
- PCB Material – FR4 fibreglass, pre-tinned
- PCB Hole Pitch – 2.54mm
- Header Pitch – 2.54mm, 40-pin
- Screw Terminal Pitch – 5.08mm
- Screw Terminal Rating – 300V / 16A
- Jumper Cap Pitch – 2.54mm
Ideal For
- Moving breadboard projects to permanent solder boards
- Arduino and Raspberry Pi prototyping
- Electronics experiments and DIY projects
- Building custom shields and breakout boards
Package Contents
- 10× 2×8cm prototype PCB boards
- 10× 3×7cm prototype PCB boards
- 5× 4×6cm prototype PCB boards
- 5× 5×7cm prototype PCB boards
- 10× 40-pin straight male headers
- 10× 40-pin right-angle male headers
- 10× 40-pin female headers
- 5× 2-pin screw terminal blocks (5.08mm)
- 5× 3-pin screw terminal blocks (5.08mm)
- 30× Jumper caps
- 1× Plastic storage box
Jargon buster
Plain-language definitions for the technical terms used above.
- breakout
- A breakout board carries a small or fine-pitched component and brings its connections out to standard, breadboard- and header-friendly pins. Describing a part as a breakout means it can be wired into a project without soldering directly to the component's tiny contacts.
- Headers
- Rows of connector contacts on a fixed pitch (commonly 2.54 mm) used to link a board to a breadboard, jumper wires, or another board. They come as male pin headers and female socket headers; when a module ships with pre-soldered headers it can be used straight away, whereas bare pads require soldering the pins yourself.
- PCB
- A printed circuit board (PCB) is a board, usually rigid, with etched copper tracks that connect electronic components together without loose wiring. Components are mounted on the board and signals route between them through the copper layout.
Find this product in
Prototyping & Wiring
STEM & Education
Related Tutorials
Free guides on learn.littlebird.com.au
