All Products

SKU: AF-919

This RF adapter bit is great for anyone doing RF work. Depending on the dev-board and antenna you have, you may be faced with either RP-SMA or SMA connectors. Unfortunately they are not compatible! This adapter solves the problem with a RP-SMA jack on one end and an SMA Plug on the other. We a...

SKU: AF-920

This RF adapter bit is great for anyone doing RF work. Depending on the dev-board and antenna you have, you may be faced with either RP-SMA or SMA connectors. Unfortunately they are not compatible! This adapter solves the problem with an SMA jack on one end and an RP-SMA Plug on the other. We ...

SKU: SF-WRL-09233

The SMA Male to RP-SMA Male Adapter converts between SMA and RP-SMA connector types, making it easy to pair antennas and cables that use different threading configurations. One end features a standard SMA male connector (centre pin, outer nut) and the other features an RP-SMA male connector (cent...

SKU: AF-1532

This RF adapter bit is great for anyone doing RF work. If your receiver/transmitter/transceiver has an MCX connector but you really want to tie it to an SMA antenna, this dongle will do the trick!

SKU: AF-851

This RF adapter cable bridges the gap between small u.FL board connectors and standard SMA antennas. One end has a panel-mount SMA female connector, the other a u.FL (also known as IPEX, IPAX, IPX, MHF) plug — ideal for connecting external antennas to GPS modules, cellular modules, and other RF b...

SKU: AF-5444

An adapter cable that connects an RP-SMA antenna to RF modules with a w.FL (MHF3 / IPEX3) connector. Essential for adding external antennas to Wi-Fi, Bluetooth, and other RF boards that use the tiny w.FL port — such as the Adafruit Feather ESP32 V2. The cable is just over 20 cm (7.8″) long, with...

SKU: SF-WRL-09232

This is an adapter that converts an RP-SMA board to an SMA antenna. The adapter will connect to any of our 2.4GHz wireless boards (Bluetooth, Nordic, or XBee) or interface cables and will allow you to use an antenna/cable with an SMA connection. You should not need this adapter with any of ...

SKU: PI-ADP010

A handy adapter that converts a 2.1 mm DC barrel jack (female socket) into a screw terminal block. Plug a wall adapter or barrel-plug cable into the jack end, and access the power lines via labelled +/− screw terminals on the other — no soldering required. Key Features 2.1 mm DC Barrel Jack – ...

SKU: SF-CAB-14911

This 1-metre interface cable converts between N-type and RP-SMA connectors, making it ideal for connecting larger LoRa antennas (such as 915MHz antennas with N-type connectors) to devices with RP-SMA ports. The RG316 coaxial cable supports frequencies up to 3GHz. Specifications Connector A: N-...

SKU: AF-852

This RF adapter cable is super handy for anyone doing RF work. Often times, small electronics save space by having a pick-and-placeable u.FL connector (also called uFL, IPEX, IPAX, IPX, MHF, and AM). But most antennas have SMA or RP-SMA connectors on them. This little cable will bridge the two...

SKU: PI-ADP011

A handy adapter that converts bare wire connections into a standard 2.1 mm DC barrel plug. Strip your battery pack or power supply wires, secure them in the screw terminals, and plug straight into any board or device with a 2.1 mm barrel jack input — no soldering required. Key Features 2.1 mm ...

SKU: SF-WRL-00662

This connector cable interfaces UFL RF connectors to RP-SMA antennas. Use it to attach any standard RP-SMA 2.4GHz antenna to the our WiFly Shield.Dimensions: 4" LengthDocuments: Datasheet RF Connector Buying Guide

SKU: AF-1859

This 2.4"/61mm long antenna has 2dBi of gain and 50Ω impedance so it will work fantastically with just about any 850/900/1800/1900/2100 wireless receiver/transmitter such as any Cellular or GSM/GPRS device. Antenna comes with a SMA connector, which is the most common type you'll see for Cell...

SKU: AF-411

A small adapter that converts a standard 5.5 / 2.1 mm DC barrel plug into a 4.0 / 1.7 mm plug, letting you use common 2.1 mm wall adapters with devices that have a smaller 1.7 mm DC jack input. Key Features 2.1 mm Jack Input – Accepts standard 5.5 / 2.1 mm barrel plugs 1.7 mm Plug Output – Fi...

SKU: AF-1858

This 2.2"/57mm long antenna has 2dBi of gain and 50Ω impedance so it will work fantastically with just about any 850/900/1800/1900/2100 wireless receiver/transmitter such as any Cellular or GSM/GPRS device. Antenna comes with a Right-angle SMA connector. If you need to connect this to an RP...

SKU: SF-CAB-21739

A 300mm (1 foot) SMA male to TNC male cable with injection-moulded stress-relief boots. Built with SYV-50-3 cable for an excellent balance of low signal loss and high flexibility — chosen over RG58 for superior performance at GNSS frequencies. Ideal for connecting RTK development boards to high-...

SKU: SF-CAB-22034

A 25 cm (9.8″) SMA male-to-female extension cable with RG174 coaxial housing. Ideal for mounting an antenna on the outside of an enclosure while keeping the RF module or GPS receiver safely inside. The threaded SMA connectors provide a secure mechanical connection suitable for GPS, cellular, Wi-F...

SKU: SF-CAB-22037

A 25cm RP-SMA male-to-female extension cable with RG174 coaxial housing. Ideal for repositioning an antenna to the outside of an enclosure while keeping your electronics neatly inside, this cable provides a reliable RF connection for GPS, cellular, Wi-Fi, and other RF applications. The RP-SMA (R...

SKU: SF-CAB-21281

When experimenting with GPS or RF it can be very handy to have the antenna on the top of your house or outside with a clear view of the sky while you stay in doors and warm at your keyboard. This 10m (33') SMA extension does a great job of connecting your receiver or radio to a distant antenna wi...

SKU: AF-2788

A DC barrel jack adapter cable that converts a 3.5/1.3 mm or 3.8/1.1 mm DC plug to the standard 5.5/2.1 mm DC barrel jack format. Internal spring contacts accommodate outer diameters from 3.5 mm to 3.8 mm, making it versatile across a range of small-barrel DC connectors. Key Features Wide Comp...