All Products

SKU: AF-3896

A 3-bladed trifoil propeller designed to snap onto standard DC hobby motors. Great for making simple fans, wind-powered experiments, bubble machines, or lightweight propulsion projects. Key Features Snap-On Fit – Press-fits onto standard DC hobby motor shafts 3-Blade Trifoil Design – Lightwei...

SKU: LB-LS5630

A pair of 46mm propellers designed for 612 coreless motors. The optimised blade profile provides efficient thrust for mini drones and RC aircraft. Key Features 46mm Diameter – Sized for micro drones and RC aircraft 612 Motor Compatible – Designed for coreless motor shafts Durable Constructio...

SKU: AF-1566

A large-sized rechargeable battery pack for your Raspberry Pi (or Arduino, or Propeller, or anything else that uses 5V!). This pack is intended for providing a lot of power to an GPS, cell phone, tablet, etc but we found it does a really good job of powering other miniature computers and mi...

SKU: AF-607

A 32×32 full-colour RGB LED matrix panel with 1024 LEDs at 4mm pitch, measuring approximately 5 inches (128mm) square. These panels are commonly used in video walls and signage, delivering bright, vivid colours with good white balance uniformity. On the back, dual IDC connectors (input and output...

SKU: AF-3337

Learning to invent is fast and fun with no code-typing or circuit-soldering to slow things down. The BlocklyProp Starter Kit has all the hardware required to fully learn the Parallax’s Blockly visual programming tool in an educational environment, providing a natural first look into the C prog...

SKU: DF-DFR0332

Make an air aerial propeller vessel, a cooling system, or spinning machine with this small fan module. It comes with a propeller, a 15,000 rpm motor and cable. Add flavor to your own interesting projects with this module. This module is commonly used for STEM class. SPECIFICATIONS ...

SKU: AF-2026

A 32×32 full-colour RGB LED matrix panel with 1024 LEDs at 5mm pitch. Designed for indoor use with a wide 160° viewing angle and pre-balanced white output, these panels look great in ambient light. The slightly larger pitch than 4mm panels makes them well-suited for displays viewed at moderate di...

SKU: AF-1484

A 32×32 full-colour RGB LED matrix panel with 1024 LEDs at 6mm pitch. The larger pitch provides good visibility at greater distances, making it suitable for signage and larger-scale displays. Pre-balanced white output and a 1:16 scan rate with 12 × 16-bit latches handle the display multiplexing. ...

SKU: LB-PT7001

Brushless Motor for RC Airplane Quadcopter 1000kVDescription:Brand Name: XXDItem NO.: XXD A2212Dimension: 27.8*27mmShaft diameter: 3.17mmMax Efficiency: 80%Max Efficiency Current: 4-10A (>75%)Current Capacity: 12A/60sNo Load Current @ 10V: 0.5ANo. Of Cells: 2-3 Li-PolyWeight: 65gKV: 1000Suitable ...

SKU: AF-913

Yes, this is an adorable small television! The visible display measures only 3.5" (8.9cm) diagonal, the TFT comes with a NTSC/PAL driver board. The display is very easy to use - simply connect 6-12VDC to the red (+) and black (-) wires, then connect a composite video source to the RCA connectors....

SKU: AF-911

Yes, this is an adorable miniature television! The visible display measures only 2.0" diagonal, the TFT comes with a NTSC/PAL driver board. The display is very easy to use - simply connect 6-12VDC to the red and black wires, then connect a composite video source to the yellow and black wire. Voil...

SKU: AF-910

Yes, this is an adorable miniature television! The visible display measures only 1.5" diagonal, the TFT comes with a NTSC/PAL driver board. The display is very easy to use - simply connect 6-12VDC to the red and black wires, then connect a composite video source to the yellow and black wire. Voil...

SKU: ED-ETS-FLYBRIX-02

Make your own quadcopters, hexacopters, and octocopters with the Flybrix™ Deluxe Kit.This kit adds a joystick control system to the octocopter kit, so you can pilot your drones without the Flybrix App. You can also connect to the flightboard with the App and the joystick controller at the same ti...

SKU: ED-ETS-FLYBRIX-04

Make your own quadcopters, hexacopters, and octocopters with the Flybrix™ Octocopter Kit.This kit comes complete with everything you need to build and fly your first drone within 15 minutes. No extra tools or supplies needed!Download the Flybrix Bluetooth® Flight Control App to your smartphone or...

SKU: ED-ETS-FLYBRIX-01

Build your own rebuildable, crash-friendly quadcopter with the Flybrix LEGO Drone Kit. Everything you need to build and fly your first drone is included — no extra tools or supplies required. Get airborne in as little as 15 minutes. The pre-programmed flight board includes an accelerometer, gyro...

SKU: DF-FIT0790

A pack of four coreless micro motors measuring 6 × 10 mm, capable of reaching 55,000 RPM at 3.7V. Slightly larger than the 4 × 12 mm variant, these motors offer a wider shaft (0.8 mm) for improved propeller compatibility, making them well suited for DIY micro drones and small RC aircraft. Key Fe...

SKU: LB-LS6890

A complete DIY quadcopter kit that includes everything you need to build and fly your own drone. The Little Bird Quadcopter comes with a camera, transmitter, and battery – just assemble, pair, and take off. Connect to the drone's WiFi (KY4K) with the KY FPV app on your phone to view the live cam...

SKU: DF-FIT0796

A pack of four coreless micro motors sized 8.5×20mm, designed for DIY drone builds and lightweight RC projects. These high-speed motors deliver 46,000 RPM from a compact form factor, making them well-suited for quadcopter and multirotor applications. Each motor runs on 3.7V (single LiPo cell) an...

SKU: DF-FIT0792

A pack of four coreless micro motors measuring 6 × 14 mm, reaching 55,000 RPM at 3.7V. The longest in the 6 mm diameter range, this variant offers the most torque while maintaining compatibility with micro drone propellers via its 0.8 mm shaft. Key Features 55,000 RPM – High-speed coreless mot...

SKU: DF-FIT0795

A pack of four coreless micro motors measuring 8 × 16 mm, reaching 50,000 RPM at 3.7V. With the widest diameter and highest current draw (170 mA) in the coreless micro motor range, these deliver the most torque — ideal for mini drones carrying camera payloads or heavier RC builds that need maximu...