All Products

SKU: AF-3910

This peristaltic pump moves liquid by squeezing flexible silicone tubing with a rotating clover-pattern roller mechanism — the pump never directly contacts the fluid. This makes it well suited to food, beverage, gardening, and sterile applications where contamination must be avoided. The pump is...

SKU: AF-1150

Move fluid safely from here to there with this very nice little pump. Unlike most liquid pumps, this is a peristaltic type - the pump squishes the silicone tubing that contains the liquid instead of impelling it directly. The upshot? The pump never touches the fluid which makes this an excelle...

SKU: AF-3659

Move fluid from here to there with this very nice elastomeric silicone tubing, specifically for our peristaltic pump. It's one meter long and fully silicone with the correct diameter to give great peristaltic performance.This silicone tubing is not sterile and might get a lil' dirty on...

SKU: SF-KIT-30716 · MPN: KIT-30716

Add another automated planting zone to your AgXRP setup with this expansion for the AgXRP Starter Kit. It lets students and educators add a second pump and soil moisture sensor, so they can water a second plant independently and compare soil conditions or watering schedules side by side.The pack ...

SKU: AF-4699

A simple DC-powered air pump for inflatables and air-powered projects. Power it with ~4.5V (5V works fine) and it draws about 500mA, making it easy to run from the same supply as your DC motors or servos. The pump sucks air in from the side of the casing and pushes it out the tubing port. Contro...

SKU: AF-4700

A compact DC-powered air pump for inflatables and air-powered projects. Power it with ~4.5V (5V works fine) and it draws about 600mA, making it easy to run from the same supply as your DC motors or servos. The pump sucks air in from the side of the casing and pushes it out the tubing port. Contr...

SKU: AF-4662

These T-shaped barbed connectors allow you to split or combine silicone tubing runs into three-way junctions. Each port has an outer diameter of approximately 4 mm, designed to fit snugly with 3 mm ID silicone tubing for a secure seal. Key Features T-Junction Design – Three-way barbed connecto...

SKU: DF-DFR0523

Gravity: digital peristaltic pump is a new product developed by DFRobot. This is a new member of our water quality monitoring devices. It is an actuator for the liquid system. DFRobot peristaltic pump integrates a PPM motor driver on the pump, this is a Gravity interface (PH2.0-3P) motor...

SKU: SF-ROB-19222

Do you have some liquids that you need to move? This fluid pump will move 500 gallons per hour! The SEAFLO mini water pump has a heavy duty 12V, 1.5Amp motor and a tough thermoplastic body. This bilge pumps offer water evacuation activated by a panel or float switch. It includes anti-airlock prot...

SKU: SF-KIT-30714 · MPN: KIT-30714

Bring robotics, coding and plant science together in a hands-on classroom platform for building a small-scale automated smart farm. This open-source kit is designed for STEM education, helping students explore precision agriculture, data analysis and automation while growing and caring for real p...

SKU: AF-4764

These 2-prong barbed fitting connectors are designed for use with silicone tubing in air pump and valve setups. Each port has an outer diameter of approximately 4mm, creating a secure seal with 2–3mm ID silicone tubing. Use them to make adapters, extenders, or Y-junctions in pneumatic projects. ...

SKU: SF-KIT-30715 · MPN: KIT-30715

Add another controlled planting area to an existing AgXRP Starter Kit with this DIY expansion pack. It is designed to create a completely independent watering zone, so students can compare plant types, watering schedules and soil conditions side-by-side.The pack works with the XRP Controller in t...

SKU: AF-4546

Make fountains or plant-watering projects with this submersible water pump. It's great for beginner projects and super easy to use! The pump is basically a DC motor that is powered with 3V and draws 100mA. When powered, the pump sucks water in from the side of the plastic casing and pushes it out...

SKU: DF-SEN0704 · MPN: SEN0704

This flexible thin-film array gives robots, wearables and HCI projects a compact way to sense where pressure is being applied. It integrates 36 independent sensing points into a 15 x 15mm active area, enabling real-time pressure distribution mapping instead of a single force reading.The bendable ...

SKU: SF-KIT-30713 · MPN: KIT-30713

Imagine a classroom where students do not just read about the future of agriculture  they build it. The DIY AgXRP Starter Kit is an open-source autonomous robotics platform that bridges the gap between STEM education and sustainable farming. By providing the core electronics and encouraging...

SKU: AF-4661

A 1-metre length of soft, flexible silicone tubing with a 3 mm inner diameter. Designed for use with small air pumps, vacuums, and air valves, it's ideal for air-powered electronics projects and pneumatic experiments. The tubing is stretchy enough to fit snugly onto ports up to 4 mm OD, and it's...

SKU: SF-ROB-10455

The SEAFLO mini water pump is a submersible 12 V pump capable of moving up to 1325 litres per hour (350 GPH). Powered by a heavy-duty 1.5 A motor housed in a tough thermoplastic body, it handles continuous operation in wet environments and is water-cooled for durability — though it won't burn out...

SKU: LB-PMMA19004A001

A compact 370 DC diaphragm pump designed for automated plant watering systems and other fluid transfer applications. With a wide operating voltage range of 3–24V, it's easy to integrate with Arduino and other microcontroller-based projects for smart irrigation control. The self-priming diaphragm...

SKU: AF-4545

This clear PVC tubing is sized to fit standard small submersible pumps, with an 8 mm inner diameter that provides a snug, secure connection. It's easy to cut to length and flexible enough to route through tight spaces in your project. Key Features 8 mm Inner Diameter – Fits common small submer...

SKU: AF-4547

A small submersible DC water pump for fountains, plant-watering systems, and other beginner projects. The pump draws water in from the side of the plastic casing and pushes it out through the tubing port. It runs on 3 V and draws approximately 100 mA, making it easy to drive from a microcontrolle...