All Products

SKU: AF-1932

A labelled breakout board for 40-pin dot-clock TFT displays with an integrated LED backlight driver. Breaks out all 40 FPC pins to breadboard-friendly through-hole pads and includes a FAN5333-based boost converter for driving backlight LED strings up to 24V. The backlight driver defaults to 25mA...

SKU: LB-LR0293-13

A 40-pin ribbon of male-to-male (M/M) jumper wires, 30cm long, in ten rainbow colours. The wires fit standard 0.1″ (2.54mm) pitch headers and can be kept as a ribbon for neat harnesses or separated into individual jumpers. Key Features Male-to-Male (M/M) – 0.1″ male header pins on both ends 4...

SKU: LB-00162

A 40-pin ribbon of female-to-female (F/F) jumper wires, 15cm long, in ten rainbow colours (4 wires per colour). The wires fit standard 0.1″ (2.54mm) pitch headers and can be kept as a ribbon for neat harnesses or separated into individual jumpers. Key Features Female-to-Female (F/F) – 0.1″ fem...

SKU: AF-1952

These premium female-to-male extension jumper wires are ideal for making wire harnesses or extending connections between headers on PCBs. Each strip contains 20 wires (2 of each rainbow colour) in a convenient ribbon cable format that can be kept together for organised harnesses or separated into...

SKU: AF-1951

These premium female-to-female jumper wires are ideal for making wire harnesses or connecting between headers on PCBs. Each pack contains 20 wires in a ribbon cable format — two of each of ten rainbow colours — that can be kept together for organised harnesses or separated into individual jumpers...

SKU: AF-1049

The Adafruit Small 1.2" 8×8 LED Matrix w/I2C Backpack in red combines a bright 8×8 LED matrix with a dedicated HT16K33 driver backpack, letting you add a compact display to any microcontroller project with just two I2C data lines. Instead of wiring 16 pins to multiplex 64 LEDs, the backpack hand...

SKU: AF-1614

The Adafruit Small 1.2" 8×8 LED Matrix w/I2C Backpack in ultra-bright white combines a bright 8×8 LED matrix with a dedicated HT16K33 driver backpack, letting you add a compact display to any microcontroller project with just two I2C data lines. Instead of wiring 16 pins to multiplex 64 LEDs, th...

SKU: AF-1051

The Adafruit Small 1.2" 8×8 LED Matrix w/I2C Backpack in green combines a bright 8×8 LED matrix with a dedicated HT16K33 driver backpack, letting you add a compact display to any microcontroller project with just two I2C data lines. Instead of wiring 16 pins to multiplex 64 LEDs, the backpack ha...

SKU: AF-266

Handy for making wire harnesses or jumpering between headers on PCB's. These premium jumper wires are a little over 6" (150mm) long and come in a 'strip' of 40 (4 pieces of each of ten colors). They have 0.1" sockets on either end and fit cleanly next to each other on standard-pitch 0.1" (2.54...

SKU: AF-1050

The Adafruit Small 1.2" 8×8 LED Matrix w/I2C Backpack in yellow combines a bright 8×8 LED matrix with a dedicated HT16K33 driver backpack, letting you add a compact display to any microcontroller project with just two I2C data lines. Instead of wiring 16 pins to multiplex 64 LEDs, the backpack h...

SKU: AF-758

Handy for making wire harnesses or jumpering between headers on PCB's. These premium jumper wires are 6" (150mm) long and come in a 'strip' of 40 (4 pieces of each of ten rainbow colors). They have 0.1" male header contacts on either end and fit cleanly next to each other on standard-pitch 0.1...

SKU: AF-4448

If you'd like to connect a USB-capable chip to your USB host, this cable will make the task very simple. There is no converter chip in this cable! Its basically a plain USB cable that's cut in half and with jumper sockets on the power and data lines. Simple to use, does the job when you have s...

SKU: AF-1052

The Adafruit Small 1.2" 8×8 LED Matrix w/I2C Backpack in blue combines a bright 8×8 LED matrix with a dedicated HT16K33 driver backpack, letting you add a compact display to any microcontroller project with just two I2C data lines. Instead of wiring 16 pins to multiplex 64 LEDs, the backpack han...

SKU: SF-DEV-17047

The SparkFun Qwiic GPIO adds eight additional digital I/O pins to your project via I2C, based on the TCA9534 I/O Expander from Texas Instruments. Read and write pins just like standard Arduino digital pins using the included library — functions mirror familiar pinMode and digitalWrite calls. All...

SKU: TB-HM3250

A 40-pin (2×20) dual in-line (DIL) jumper strip rated at 3A. The snap-apart design lets you break the strip into individual 2-pin jumper shunts or smaller groups to suit your needs. Key Features Snap-Apart Design – Break to any size from the 2×20 strip 3A Current Rating – Suitable for power a...

SKU: AF-3142

Our Raw Male/Male Jumper Wires are perfect for making a custom jumper wire sets for wire harnesses or jumpering between headers on PCB's. These premium jumpers are a little over 6" (150mm) long and come in a 'strip' of 40 (4 pieces of each of the ten colors). The 0.1" raw sockets on either end...

SKU: AF-1955

These Male/Male Jumper Wires are handy for making wire harnesses or jumpering between headers on PCB's. These premium jumper wires are 12" (300mm) long and come in a 'strip' of 20 (2 pieces of each of ten rainbow colors). They have 0.1" male header contacts on either end and fit cleanly nex...

SKU: TB-WB1590

A flexible 4-core alarm cable with stranded tin-plated copper conductors in a tough white outer sheath. Each core consists of 7 × 0.16mm strands (25 AWG), providing good flexibility for installation in security systems, intercoms, and low-voltage wiring applications. Sold per metre. Specificatio...

SKU: AF-3141

Our Raw F/F Jumper Wires are perfect for making custom jumper wire sets for wire harnesses or jumpering between headers on PCB's. These premium jumpers are a little over 6" (150mm) long and come in a 'strip' of 40 (4 pieces of each of the ten colors).  The 0.1" spacing raw sockets on eith...

SKU: SF-PRT-09388

This is a SparkFun exclusive! These are 12" long jumper wires terminated as male to male. Use these to jumper from any female header on any board. Multiple jumpers can be connected next to one another on a 0.1" header. Comes in five packs of twenty jumpers (colors shown). We use these wi...