All Products
Showing 1-20 of 60 products
Gravity: Digital Capacitive Touch Sensor For Arduino
A digital capacitive touch sensor from DFRobot's Gravity series. It detects touch through the same capacitive sensing technology used in smartphones — even through thin cloth or paper. The sensor outputs a digital high/low signal, making it a simple drop-in replacement for mechanical buttons in A...
Gravity: Capacitive Fingerprint Sensor
A capacitive fingerprint sensor with integrated processing, storage, and matching built around the ID809 high-performance processor and IDfinger6.0 algorithm. The sensor handles all fingerprint recognition independently — registration, deletion, and verification — without external processing. Sup...
Gravity: 0-10V 15-bit High-Precision Dual-Channel ADC Module
·
The Gravity 0–10V ADC Module is a high-precision dual-channel analogue-to-digital converter designed to interface industrial-grade 0–10V sensors with microcontrollers and Linux-based systems. Built on the Texas Instruments ADS1115, it delivers 15-bit resolution (0.375 mV per step) with ±2 mV accu...
DFRobot DFR1092 3.5-inch IPS Touch Screen for ESP32
·
This 3.5-inch display module combines a 480 × 320 IPS panel with capacitive touch for ESP32 and Arduino projects. Its optical bonding process laminates the touch panel and display together, improving clarity while helping reduce reflections and dust ingress.For wiring, the module offers both a st...
Gravity: 37 Pcs Sensor Set for Arduino
Go interactive with your applications with this new sensor kit! 37 sensors are included in one kit, which definitely gives you a bigger bang for your buck.In the version of this sensor kit, we add more sensor modules like, color sensor, digital wattmeter, heart rate monitor sensor, conductivity s...
Adafruit Proximity Trinkey - USB APDS9960 Sensor Dev Board
The Adafruit Proximity Trinkey is a tiny USB-A development board built around the APDS9960 multi-function sensor and an ATSAMD21 microcontroller. Plug it into any USB port and you instantly have proximity, colour, ambient light, and gesture sensing — plus two NeoPixel LEDs and two capacitive touc...
Adafruit 12 x Capacitive Touch Shield for Arduino - MPR121
The Adafruit Capacitive Touch Shield brings 12 channels of capacitive touch sensing to any Arduino using the MPR121 chip. Each sensor has a "figure 8" pad with holes designed for quick alligator clip connections — attach one end to the shield and the other to any conductive object like metal, fru...
Gravity: Haptic Motor Driver for LRA Motors
·
This Gravity haptic driver module is built for Linear Resonant Actuators (LRAs), turning simple I2C commands into crisp tactile feedback for interactive projects. It is powered by the TM6605 driver chip and supports LRA resonant frequencies from 140Hz to 220Hz.The module includes 44 built-in vibr...
Gravity: GP8101S 1-Channel PWM to 0-5V/10V DAC Module
·
A 1-channel DAC module that converts a PWM signal from any microcontroller into a precise 0–5V or 0–10V analogue voltage output. Built around the GP8101S chip with 8-bit resolution and 0.2% accuracy, it's ideal for driving standard 0–10V or 0–5V controlled devices in automation projects — lights,...
16-Key Capacitive Touch Unit (MEGA328P)
The M5Stack 16-Key Capacitive Touch Unit is a Makey Makey-inspired input device built around an ATmega328P microcontroller. It detects capacitive touch across 16 key pads, allowing you to turn everyday objects — fruit, foil, water, or anything conductive — into touch-sensitive buttons. A built-in...
Octopus Touch PAD Sensor
The Octopus Touch PAD Sensor is a capacitive touch module based on the TTP223-BA6 IC. It detects touch through dielectric materials such as glass, ceramic, and plastic, making it suitable for touch-through-panel applications. The module connects via a 3-pin Octopus connector for plug-and-play use...
3.5in 320x480 Capacitive Touch TFT Breakout Board
·
This colour touchscreen LCD gives your project a bright, high-resolution interface with a 3.5" diagonal TFT panel and capacitive touch already attached. With 480x320 pixels and individual RGB pixel control, it offers far more display space than small monochrome screens.The onboard display control...
Capacitive Touch Kit For Arduino
A capacitive touch sensor kit for Arduino based on the MPR121 touch controller. Includes three interchangeable touch pads — a scroll wheel, a keypad with backlight support, and a grid pad for gesture and pattern recognition. The MPR121 provides sensitive capacitive detection over an I²C interface...
Adafruit MPR121 12-Key Capacitive Touch Sensor Gator Breakout - STEMMA QT / Qwiic
The Adafruit MPR121 Gator Breakout adds 12 capacitive touch inputs to any microcontroller project — no soldering required. With large alligator/croc-clip friendly pads and STEMMA QT / Qwiic connectors, simply clip conductive materials to the pads and plug into your board's I2C port. The MPR121 h...
Gravity: SCI DAQ Module with Screen (I2C)
The Gravity SCI DAQ Module is a multi-functional data acquisition module with a built-in 1.3-inch OLED screen for real-time sensor readings. It supports over 20 common sensor types including temperature, humidity, and barometric pressure — with automatic sensor recognition and a standardised I2C ...
Gravity: Digital Push Button (Blue)
The Gravity Digital Push Button (Blue) is a simple momentary push button module designed for the DFRobot Gravity interface. It features an onboard LED indicator, immersion gold PCB surface, and a coloured button cap. A "D" marking on the board identifies it as a digital sensor for quick wiring re...
2.8 TFT Touch Shield for Arduino w/Capacitive Touch
The 2.8" TFT Touch Shield with Capacitive Touch plugs directly into an Arduino and provides a bright, full-colour display with a smooth glass capacitive touchscreen and onboard MicroSD card socket. Fully assembled and ready to use — no wiring or soldering required. This shield uses SPI for the d...
CAP1188 - 8-Key Capacitive Touch Sensor Breakout - I2C or SPI
Add lots of touch sensors to your next microcontroller project with this easy-to-use 8-channel capacitive touch sensor breakout board, starring the CAP1188. This chip can handle up to 8 individual touch pads, and has a very nice feature that makes it stand out for us: it will light up the 8 onboa...
Capacitive Touch Shield
This Capacitive Touch Shield has 9 build-on capacitive touchpads, and the other 3 electrodes for further usage. With this shield, you can have a total of 12 touch-sensitive buttons. This Shield uses the MPR121 which is a great way to build simple capacitive touch interfaces using the I2C communic...
Gravity: HCL Sensor (Calibrated) - I2C & UART
This is a sensor that detects hydrogen chloride concentration and supports three output modes: analog, I2C, and UART. The probe has been calibrated at the factory, which can quickly and accurately measure the concentration of hydrogen chloride in the environment. Can be widely used in the detecti...
