All Products
Showing 1-20 of 30 products
Full-Bridge Motor Driver Dual - L298N
The LN298 is a high voltage, high current, dual full-bridge motor driver designed to accept standard TTL logic levels and drive inductive loads such as relays, solenoids, DC and stepping motors. Comes in a staggered, 15-lead Multiwatt package. Check below for a breakout board. Features: O...
SparkFun Full-Bridge Motor Driver Breakout - L298N
This is a breakout board for the L298N full-bridge dual motor driver; which comes in a staggered, Multiwatt package. All pins of the L298N are broken out to a 15-pin 0.1" pitch header. Two mounting holes are also provided. Dimensions: Board: 1.6x0.85 inches Documents: Schematic Eagle...
2x2A DC Motor Shield For Arduino
The DFRobot 2×2A DC Motor Shield uses the L298P dual full-bridge driver chip to control two DC motors at up to 2 A per channel. It stacks directly onto Arduino Uno and Arduino Mega boards, using PWM pins 5 and 6 for speed control and digital pins 4 and 7 for enable/disable. The shield can be pow...
L9110H H-Bridge Motor Driver for DC Motors - 8 DIP - 2.5V-12V 800mAh
·
Run two solenoids, or a single DC motor with up to 800mA per channel using the super-simple L9110H H-bridge driver. This bridge chip is an 8 DIP package so it's easy to fit onto any breadboard or perfboard.Each chip contains one full H-bridges (two half H-bridges). That means you can drive 2 sole...
DC Motor + Stepper FeatherWing Add-on For All Feather Boards
·
A Feather board without ambition is a Feather board without FeatherWings! This is the DC Motor + Stepper FeatherWing which will let you use 2 x bi-polar stepper motors or 4 x brushed DC motors (or 1 stepper and 2 DC motors). Using our Feather Stacking Headers or Feather Fem...
Adafruit DC Stepper Motor HAT for Raspberry Pi - Mini Kit
·
The Adafruit DC & Stepper Motor HAT drives up to 4 DC motors or 2 stepper motors from your Raspberry Pi, with full PWM speed control. It uses a dedicated PWM driver chip over I2C, so only two pins (SDA/SCL) are needed — leaving the rest free for other I2C devices or HATs. The TB6612 MOSFET motor...
Adafruit DC Stepper Motor Bonnet for Raspberry Pi
·
The Adafruit DC & Stepper Motor Bonnet drives up to 4 DC motors or 2 stepper motors from your Raspberry Pi, with full PWM speed control. It uses a dedicated PWM driver chip over I2C, so only two pins (SDA/SCL) are needed — leaving the rest free for other I2C devices or HATs. The TB6612 MOSFET mo...
Assembled DC Motor + Stepper FeatherWing Add-on
·
A Feather board without ambition is a Feather board without FeatherWings! This is the Fully assembled (with headers) DC Motor + Stepper FeatherWing which will let you use 2 x bi-polar stepper motors or 4 x brushed DC motors (or 1 stepper and 2 DC motors). Using our Feather Stacking Headers or Fea...
Adafruit CP2105 Friend - USB to Dual UART Serial Converters
·
The Adafruit CP2105 Friend provides two independent UART serial ports from a single USB-C connection — no USB hub required. Built around the Silicon Labs CP2105 dual-port bridge, it enumerates as two separate COM ports when plugged in, giving you an Enhanced port and a Standard port with differen...
CP2102N USB-to-Serial Adapter Carrier
This compact USB-to-serial adapter lets you easily connect TTL serial devices to a computer, where it appears as a virtual COM port. The board is a Micro-USB carrier for the Silicon Labs CP2102N USB-to-UART bridge, providing access to all control signal pins and GPIO pins. It serves as a conveni...
ESP32-H2-DevKitM-1 - 4 MB Flash
The ESP32-H2-DevKitM-1 is an entry-level development board based on the ESP32-H2-MINI-1 module, featuring Bluetooth Low Energy 5, IEEE 802.15.4, Thread, Matter, and Zigbee support on a single chip. It's an ultra-low-power IoT solution ideal for smart home, mesh networking, and multi-protocol appl...
USB to UART Bridge - FT232RL
The FT232RL is a popular USB-to-UART bridge IC from FTDI, featuring a built-in EEPROM and oscillator for minimal external component requirements. It comes in a 28-pin SSOP package that can be hand-soldered, making it a versatile choice for adding USB serial communication to custom projects. Key ...
14" CrowView Note with Raspberry Pi 5 Bridge Board
The Elecrow CrowView Note is a 14" laptop-style portable monitor that turns your single-board computer, smartphone, or mini PC into a complete workstation. With an integrated IPS display, full keyboard, touchpad, stereo speakers, and a 5000mAh battery, it provides everything you need for a clean,...
CAN FD to RS232/RS485 Converter – Bidirectional, 5 Modes, Rail-Mount
·
CAN FD Protocol Converter with RS232/RS485 Bidirectional CommunicationIndustrial-Grade Conversion SolutionIntroducing our premium CAN FD Protocol Converter – a dynamic tool designed for seamless communication between CAN FD and serial interfaces. This converter is the ultimate bridge for integrat...
SparkFun Inventor's Kit Bridge Pack for micro:bit
Do you own a micro:bit or micro:bit Go Bundle and want to expand your skills with the new microcontroller? You are in luck! The SparkFun Inventor’s Kit Bridge Pack for micro:bit was designed to provide you with an easy way to transform your m:b into a full fledged learning kit! Each Bridge P...
Pololu 38 kHz IR Proximity Sensor, Fixed Gain, Low Brightness (irs05a)
Discontinuation notice: These original (irs05a) versions of our 38 kHz IR proximity sensors have been replaced by newer (irs05b) high-brightness and low-brightness versions. The main changes are the locations of the emitter LED and IR detector, which have been moved away from the edge of t...
FT231XS USB to Serial UART Module
·
This compact module provides a USB to serial UART interface using the FT231X family, making it a straightforward way to add USB connectivity to UART-based projects.It supports full modem control and works as a USB to UART bridge for embedded boards, prototypes and test setups that need reliable s...
USB-to-Serial Bridge - µUSB-PA5
The µUSB-PA5 is a compact USB-to-Serial TTL UART bridge based on the FTDI FT232RQ. It connects to your PC via a Mini-B USB connector and provides serial communication at baud rates up to 3 Mbps — designed primarily for programming and communicating with 4D Systems displays and controllers. The 5...
Loti-Bot Programmable Floor Robot
·
Loti-Bot is the bridge between early programming with Bee-Bot and Blue-Bot and the more advanced work students meet later. It keeps the familiar floor-robot format, then adds the inputs, outputs and precision that make longer, more interesting programs worth writing. The drawing capability is the...
LattePanda Mu A380 MXM GPU Carrier Board Kit
·
Build a compact LattePanda Mu-based x86 edge system with discrete MXM graphics and multi-display output. This carrier board kit is designed to bridge the gap between low-power SBCs and larger industrial PCIe expansion systems, making it suitable for edge AI, signage and visual computing projects....
