All Products

SKU: SF-CAB-21740

This is a 10 meter (33 ft) long Male TNC to Male SMA cable with injection molded stress-relief boots. This is an excellent cable for connecting one of our RTK development boards to a high quality 'UFO' style GNSS antenna. It's long enough to connect to an antenna on the roof to one of our GNSS re...

SKU: ET-1734951

A 10-metre Cat 5e Ethernet cable with RJ45 plugs on both ends. Suitable for connecting a Raspberry Pi, computer, or other networked device to a router, switch, or hub. Specifications Category – Cat 5e Length – 10 m Connectors – RJ45 plug on both ends Conductor Size – 24 AWG Jacket Colour –...

SKU: SF-GPS-22429

The SparkFun RTK Reference Station is a high-precision GNSS base station designed for surveying, geolocation, and time reference applications. Set up a fixed-location NTRIP server to provide RTK corrections to rovers, or use it as an NTP server for network time synchronisation — all with just a f...

SKU: SF-GPS-23748 · MPN: GPS-23748

The SparkFun RTK mosaic-X5 is a high-precision GNSS positioning and navigation receiver built around the Septentrio mosaic-X5 multi-constellation, multi-frequency module. Supporting GPS, GLONASS, Beidou, Galileo, NavIC, SBAS, and QZSS across L1/L2/L5 bands, the 448-channel receiver delivers centi...

SKU: AF-5441

When you want a super skinny Ethernet / CAT-6 cable, this noodle-y UTP jumper is only 3mm thick at the center, so it can flex around enclosures easily. This cable is 1 meter long, comes in Adafruit black. CAT6 means it's great for Ethernet-based LANs and other data networks. U...

SKU: AF-909

This handy Ethernet extension cable will make it easy for you to enclose a device that has an Ethernet port. We think this would be most useful when putting a Beagle Bone, Raspberry Pi, Arduino Ethernet into a box.The jack half has two mounting 'ears' with 4-40 screws installed, 1" inch / 25mm ap...

SKU: DF-FIT1005 · MPN: FIT1005

The M.2 2.5G Network Card adds high-speed Ethernet connectivity to devices with an M.2 B+M Key slot. Powered by the Intel I225-V chipset, it supports adaptive data rates up to 2500 Mbps and is compatible with LattePanda Alpha, LattePanda 3 Delta, LattePanda Sigma, and other M.2-equipped single-bo...

SKU: SF-COM-19038

The SparkFun MicroMod Single Pair Ethernet Function Board brings 10BASE-T1L two-wire Ethernet to the MicroMod ecosystem using the Analog Devices ADIN1110 transceiver. It enables long-range, 10Mbps full-duplex Ethernet communication over a single twisted pair with cable reaches up to 1.7km. The A...

SKU: SF-COM-18000

The SparkFun QwiicBus MidPoint extends the range of your I2C bus using differential signaling over standard Ethernet cables. Based on the NXP PCA9615 IC, it converts I2C signals (SCL and SDA) into four differential signals, enabling reliable communication over distances up to 100 feet (30 m) whil...

SKU: DF-FIT1006 · MPN: FIT1006

##Introduction The M.2 to 2.5G Ethernet Network Card is a versatile, high-performance networking solution that enhances connectivity in systems equipped with M.2 slots, such as the LattePanda Alpha and Sigma. With the Intel I225-V chipset, it converts an M.2 slot into a high-speed 2.5G Ethernet R...

SKU: AF-4215

Add a panel-mount Ethernet port to any enclosure without cutting custom shapes. This RJ-45 round panel mount extension cable fits a standard ~30 mm round hole — just drill with a common hole saw, unscrew the plastic nut, insert from behind, and tighten. The plastic lip hides the drill hole for a ...

SKU: SF-GPS-30777 · MPN: GPS-30777

SparkPNT GNSSDO+ is a high-precision time and frequency reference built around the Septentrio mosaic-T GNSS module and a Rakon STP3593LF double-oven OCXO. It is intended for demanding timing applications where stable 10MHz and pulse-per-second references are needed, including labs, server racks a...

SKU: AF-435

Simplify your Internet of Things with a passive PoE injector cable. These are quite handy for projects that have Ethernet connectivity and also need a power cable. Of course, you can get a long Ethernet cable but then you have to figure out how to plug it in, making a mess of wires. There is an o...

SKU: PI-CAB0602

Great value, high quality 2m network cable Technology - Unshielded twisted pair (UTP) Connectors - RJ-45 - male Compliant Standards - EIA/TIA-568B Category 5e

SKU: SF-CAB-19312

HARTING T1 Industrial Single-Pair Ethernet (SPE) Products feature a highly optimized, high-frequency design, shielding, and high mechanical robustness, making them an ideal choice to fulfill industrial SPE demands. This 0.5m long Single Pair Ethernet Cable enables Ethernet data transmissions by u...

SKU: WS-16595

This Raspberry Pi hub HAT provides more USB capability to your Pi, plus a RJ45 Ethernet port, which is great when you need a stable wired Ethernet connection. It can work with various versions of the Pi, and the size of the board is designed to perfectly fit the Zero / Zero W / Zero WH. Features...

SKU: AF-5443

When you want a super skinny Ethernet / CAT-6 cable, this noodle-y UTP jumper is only 3mm thick at the center so that it can flex around enclosures easily. This cable is 30cm long, about one imperial foot, comes in Adafruit black. CAT6 means it's great for Ethernet-based ...

SKU: DF-DFR1093-868 · MPN: DFR1093-868

Build a private LoRaWAN network for EU868 regions with local processing, dashboarding and automation built in. This indoor gateway combines a Semtech SX1302 8-channel LoRaWAN concentrator with a quad-core Cortex-A35 processor, making it suitable for collecting data from multiple long-range sensor...

SKU: SF-CAB-28269 · MPN: CAB-28269

This single-port 30W PoE+ injector lets you send power and data to a PoE-enabled Raspberry Pi over one Ethernet cable. It is intended for Raspberry Pi single board computers from the Raspberry Pi 3B+ onwards, excluding the Zero series.The injector supplies 55V at 550mA and supports 10/100/1000 Mb...

SKU: PI-CAB0600

A 0.5-metre Cat5e UTP Ethernet patch cable for short-run network connections. Ideal for connecting a Raspberry Pi, router, switch, or other network device in compact setups. Specifications Category: Cat5e Type: Unshielded Twisted Pair (UTP) Connectors: RJ-45 male to RJ-45 male Length: 0.5 m...