All Products

SKU: LB-PRT-12618

An enclosed coin cell battery holder for two CR2032 batteries wired in series, delivering up to 6 V output. The holder features a built-in on/off slide switch and two 150 mm (6″) power leads (positive and negative). A secure screw-down enclosure with two Phillips head screws keeps batteries safel...

SKU: PI-COM1900

A sewable coin cell battery holder designed for wearable electronics projects. The metal tabs have small 1mm holes that accommodate a #5 or smaller needle, making it easy to sew directly onto fabric with conductive thread. The holder accepts standard CR2032 lithium coin cells (3V, ~200mAh), whic...

SKU: AF-653

This sewable CR2032 battery holder makes it easy to add power to wearable electronics projects. Two small 1mm holes in the metal connection tabs are perfectly sized for a #5 or smaller needle to pass through, so you can stitch it directly onto fabric with conductive thread. One tab connects to g...

SKU: LB-EAGLED

EagLED is Little Bird's wearable development kit — a complete Arduino-compatible microcontroller on a snappable board with built-in LEDs, a light sensor, push button, and battery holder. Snap apart the components, sew them onto fabric, and bring your wearable project to life. With built-in USB s...

SKU: SF-DEV-08822

A 20 mm coin cell battery holder designed for CR2032 batteries. The holder features a pop-in, pop-out mechanism for easy battery changes, and the mounting feet include small holes for sewing onto fabric — making it suitable for e-textile and wearable electronics projects as well as standard PCB u...

SKU: LB-SMILE

This is a simple coin cell battery holder that can enclose two CR2032 batteries inside itself, and safely kept closed via two phillips head screws. Each battery holder will run batteries in series, output up to 6V, and is equipped with an On/Off slide switch and two 4" power wires (one positive a...

SKU: LB-BK-LR0347A

A sewable coin cell battery holder with built-in on/off slide switch, designed for e-textile and wearable electronics projects. This bulk 10-pack is ideal for classrooms, workshops, and makerspaces. Each holder accepts a standard 20 mm coin cell battery (CR2032) and features sewable tabs for eas...

SKU: AF-783

A compact coin cell battery holder designed for small portable and wearable electronics projects. It holds two 20mm coin cells (CR2032 is the most common size) wired in series to provide 6V nominal output, with an on/off switch built into the top for convenient power control. The holder features...

SKU: SF-DEV-14063

The LilyMini ProtoSnap is a great way to get started learning about creating interactive e-textile circuits before you start sewing. Like other LilyPad ProtoSnap boards, the LilyMini ProtoSnap has all of its pieces wired together out of the box, enabling you to test the circuit’s function befo...

SKU: LB-PAPER-SCREW

A child-safe battery holder designed for paper circuits in educational settings. Features a screw-secured enclosure for the CR2032 coin cell battery, meeting ACCC safety guidelines for button batteries used around children. Includes a breakout board for direct copper tape connection. Paper circu...

SKU: KI-2715

A starter kit for e-textiles and wearable electronics from Kitronik's Electro-Fashion range. This Discovery Pack includes a curated selection of sewable components — LEDs, switches, coin cell holders, conductive thread, and batteries — everything you need to begin adding electronics to fabric pro...

SKU: LB-JSTBOARD

This E-textiles board is a breakout for a JST, so you can sew it onto a garment or use it in Paper Circuits! The JST breakout board can be easily sewn through the large holes. For paper circuits, simply apply copper tape on top of it.A wearable lithium polymer battery or wearable lipo also kno...

SKU: AF-1871

A sewable breakout board with a CR2032 coin cell battery holder, built-in on/off switch, and 0.1" pitch breakout pins. The board provides two ground pins, one switched power pin, and one always-on power pin — giving you flexibility in how you manage power in your project. Also available: version...

SKU: LB-CR2032-SAFE

A child-safe, screw-closed battery enclosure for a single CR2032 coin cell, designed to meet ACCC button battery safety guidelines. The compartment requires a screwdriver to open, preventing young children from accessing the battery. A breakout board on the enclosure allows you to apply copper ta...

SKU: AF-1850

Add a touch of sparkle to your wearables with the Adafruit Gemma Sequin Starter Pack. This beginner-friendly kit includes a GEMMA V2 sewable microcontroller, warm white LED sequins, conductive thread, needles, and a coin cell battery holder — everything you need to start sewing glowing electronic...

SKU: AF-1870

A simple sewable breakout board with a CR2032 coin cell battery holder pre-soldered on and 0.1" pitch breakout pins for easy connection. Ideal for powering very low-current projects or adding a battery backup circuit to a real-time clock or similar module. Key Features CR2032 Coin Cell Holder ...

SKU: LB-EAGLED-BUZZ-KIT

The EagLED is Little Bird Electronics' own Arduino-compatible wearable development kit, designed from the ground up for e-textile projects. It packs a microcontroller, LEDs, light sensor, push button, and buzzer onto a snippable board — with snap-off satellite boards for eyes, stars, and hearts t...

SKU: LB-KEY-SCREW

These handy little screwdrivers can be used with our E-Textile boards to add and remove the M1.4 screws to access the coin cell battery.The screwdriver comes on a handy keyring so you can carry it round.These are also great for doing glasses repair and access to phones.

SKU: PI-TEK001

A lightweight, sewable battery board that's great for paper and fabric engineering projects. Works with CR2032 coin cell batteries. The voltage (and hence current) supplied from LIR2032 rechargeable coin cell batteries may damage the Teknikio LED boards, so please ONLY USE&...

SKU: LB-EAGLED-BUZZ

EagLED is Little Bird Electronics' wearable development kit: an Arduino-compatible microcontroller board with LEDs, a light sensor, push button and buzzer built into a snippable PCB for e-textile projects.Built-in USB support lets you program and power the board from a computer. It works with the...