All Products

SKU: KI-2715

A starter kit for e-textiles and wearable electronics from Kitronik's Electro-Fashion range. This Discovery Pack includes a curated selection of sewable components — LEDs, switches, coin cell holders, conductive thread, and batteries — everything you need to begin adding electronics to fabric pro...

SKU: LB-00081

A standard CR2032 3 V lithium coin cell battery. Commonly used in real-time clocks, key fobs, wearable electronics, LED throwies, and e-textile projects with LilyPad battery holders. Specifications Type – CR2032 lithium coin cell Voltage – 3 V Chemistry – Lithium manganese dioxide Warning...

SKU: PR-PIM315

The Bearables Bear LED Badge is a wearable, sewable badge featuring 12 coloured LEDs and 12 built-in light patterns. Press the multi-function button to cycle through patterns, put the badge to sleep, or activate trigger mode for use with Bearables analog sensors connected via conductive thread. ...

SKU: AF-654

A standard CR2032 lithium coin cell battery providing 3V nominal output. This non-rechargeable cell is widely used in electronics projects, wearables, and sewable circuits. Specifications Type – CR2032 lithium coin cell (non-rechargeable) Nominal Voltage – 3V (starts at ~3.2V, drifts to ~2.5V...

SKU: PR-PIM314

A charming fox-shaped wearable LED badge featuring 12 coloured LEDs and 12 light patterns. The Bearables Fox Badge is sewable, hackable, and wearable — perfect for e-textile projects and creative wearables. Attach the badge using thread (normal or conductive), a safety pin, a small disc magnet, ...

SKU: LB-CR2032-SAFE

A child-safe, screw-closed battery enclosure for a single CR2032 coin cell, designed to meet ACCC button battery safety guidelines. The compartment requires a screwdriver to open, preventing young children from accessing the battery. A breakout board on the enclosure allows you to apply copper ta...

SKU: LB-EAGLED-BUZZ-KIT

The EagLED is Little Bird Electronics' own Arduino-compatible wearable development kit, designed from the ground up for e-textile projects. It packs a microcontroller, LEDs, light sensor, push button, and buzzer onto a snippable board — with snap-off satellite boards for eyes, stars, and hearts t...

SKU: SF-PRT-00338

CR2032 Lithium metal 3V 250mAh button cell battery. Great for powering low power processors or blink an LED for weeks at a time. Note: This item is non-returnable. If this item arrives damaged or is not functioning properly, please do not hesitate to contact us to see if further actions may be ta...

SKU: LB-PAPER-SCREW

A child-safe battery holder designed for paper circuits in educational settings. Features a screw-secured enclosure for the CR2032 coin cell battery, meeting ACCC safety guidelines for button batteries used around children. Includes a breakout board for direct copper tape connection. Paper circu...

SKU: PI-COM1900

A sewable coin cell battery holder designed for wearable electronics projects. The metal tabs have small 1mm holes that accommodate a #5 or smaller needle, making it easy to sew directly onto fabric with conductive thread. The holder accepts standard CR2032 lithium coin cells (3V, ~200mAh), whic...

SKU: SF-PRT-11855

A high-discharge 2-cell lithium-ion battery pack delivering 7.4 V and 1000 mAh of capacity. With a 25C continuous discharge rate, this battery is well suited to R/C vehicles, robotics, and portable electronics that need compact power with plenty of punch. The 7.4 V output keeps voltage low enoug...

SKU: AF-1871

A sewable breakout board with a CR2032 coin cell battery holder, built-in on/off switch, and 0.1" pitch breakout pins. The board provides two ground pins, one switched power pin, and one always-on power pin — giving you flexibility in how you manage power in your project. Also available: version...

SKU: LB-BK-00081

Running a Paper Circuits Class or need lots of batteries for E-Textiles and Wearables?  This is our best-priced Coin Cell Battery.CR2032 Button Cell Battery - Great for use with the Lilypad Switch Battery Holder.  These batteries are also used with many paper circuit kits.Please note - ...

SKU: AF-1850

Add a touch of sparkle to your wearables with the Adafruit Gemma Sequin Starter Pack. This beginner-friendly kit includes a GEMMA V2 sewable microcontroller, warm white LED sequins, conductive thread, needles, and a coin cell battery holder — everything you need to start sewing glowing electronic...

SKU: TB-SB1770

These high capacity batteries are used in many desktop and notebook computers to retain date, time and configuration information while the computer is switched off. They are also useful where long shelf life is important or when the battery is to be fitted into difficult or sealed access areas. ...

SKU: AF-1578

Lithium ion polymer (also known as 'lipo' or 'lipoly') batteries are thin, light and powerful. The output ranges from 4.2V when completely charged to 3.7V. This battery has a capacity of 500mAh for a total of about 1.9 Wh. If you need a larger (or smaller!) battery, we have a full range of LiP...

SKU: KI-2726

Ultra-slim sewable LED boards from Kitronik in sakura lilac, designed for e-textile and wearable electronics projects. Each LED board runs from a 3V coin cell battery and illuminates continuously when powered. The double-sided PCBs feature clearly marked + and – connections for reliable conductiv...

SKU: LB-PRT-12618

An enclosed coin cell battery holder for two CR2032 batteries wired in series, delivering up to 6 V output. The holder features a built-in on/off slide switch and two 150 mm (6″) power leads (positive and negative). A secure screw-down enclosure with two Phillips head screws keeps batteries safel...

SKU: AF-3672

This kit is designed for use with the electronic textiles unit in the Exploring Computer Science (ECS, exploringcs.org) introductory computing curriculum for secondary students. It contains most of the materials needed for four e-textiles projects: paper circuit, wristband, mural, and hum...

SKU: AF-653

This sewable CR2032 battery holder makes it easy to add power to wearable electronics projects. Two small 1mm holes in the metal connection tabs are perfectly sized for a #5 or smaller needle to pass through, so you can stitch it directly onto fabric with conductive thread. One tab connects to g...