All Products

SKU: SF-DEV-27510 · MPN: DEV-27510

Add the user interface and power features needed to take a compatible SparkFun development board into the field. This shield brings together battery power, charging, storage and controls in a compact add-on board.Power is handled with a LiPo battery connector, charger, fuel gauge and an on/off sw...

SKU: WS-25370

SC3336 3MP Camera Module, With High Sensitivity, High SNR, and Low Light Performance, Compatible With LuckFox Pico Series Boards Specifications Wide field of view  Onboard 98.3° wide angle lens, provides a wider picture range and viewing angle  High SNR and Low Light Performances...

SKU: AF-2922

Add datalogging capability to any Feather board with the Adalogger FeatherWing. This add-on combines a battery-backed real-time clock (PCF8523) with a microSD card socket, giving your project accurate timestamps and local data storage in one compact wing. The RTC communicates over I2C with a 32 ...

SKU: AF-3028

A Feather board without ambition is a Feather board without FeatherWings! This is the DS3231 Precision RTC FeatherWing: it adds an extremely accurate I2C-integrated Real Time Clock (RTC) with a Temperature Compensated Crystal Oscillator (TCXO)  to any Feather main board. This RTC is the m...

SKU: AF-2945

The NeoPixel FeatherWing adds a 4×8 matrix of 32 individually addressable RGB LEDs to any Adafruit Feather board. Using Feather stacking headers or female headers, the wing connects directly on top or bottom of your Feather for a compact, colourful display. Only one pin is required to control al...

SKU: AF-2928

The 8-Channel PWM or Servo FeatherWing adds 8 channels of 12-bit PWM output to any Adafruit Feather board via I2C. It uses an onboard PWM driver with a built-in clock, so it runs independently without tying up your microcontroller — unlike the TLC5940 family, no continuous signal is needed. The ...

SKU: AF-2927

A Feather board without ambition is a Feather board without FeatherWings! This is the DC Motor + Stepper FeatherWing which will let you use 2 x bi-polar stepper motors or 4 x brushed DC motors (or 1 stepper and 2 DC motors). Using our Feather Stacking Headers or Feather Fem...

SKU: AF-2900

A Feather board without ambition is a Feather board without FeatherWings! This is the FeatherWing OLED: it adds a 128x32 monochrome OLED plus 3 user buttons to any Feather main board. Using our Feather Stacking Headers or Feather Female Headers you can connect a FeatherWing on top of your Feat...

SKU: AF-2884

The FeatherWing Proto is a prototyping add-on board compatible with all Adafruit Feather boards. It provides duplicate breakouts for every Feather pin, a grid of proto holes for custom circuitry, and connected pad strips for GND and 3.3V — everything you need to add custom components to your Feat...

SKU: AF-2890

This is the FeatherWing Doubler - a prototyping add-on and more for all Feather boards. This is similar to our FeatherWing Proto except there are two! The magic of the Doubler comes when stacking a Feather and another board on top of the Doubler so you can work with both boards si...

SKU: LI-660-0005

The littleBits Mounting Boards let you keep your circuit intact and move it around with ease. Simply snap together your littleBits circuit and press the module feet into the holes of the mounting board. Boards come 2 to a pack. Key Features Secure Hold – Hold your circuit upside down, vertical...

SKU: AF-3690

If you have a Pycom board, you probably want to stick it outside. How to do that safely? Behold the Universal IP67 Case! Pycom designed their own waterproof enclosure with thoughtful push-in tabs to perfectly fit accessory components, creating a water-tight seal. Need to affix your project ...

SKU: WS-24078

Raspberry Pi Zero USB HUB and HDMI expansion module for Raspberry Pi Zero / Zero 2 W Series boards, Works with other POD modulesUSB HUB And HDMI Expansion Module  Interfaces Expansion for Zero | Aluminum Alloy Case | ABS Top And Bottom Covers  The Zero POD HDMI USB HUB Module ...

SKU: WS-24077

Raspberry Pi Zero POD case for Raspberry Pi Zero / Zero 2 W Series boards, Works with other POD modules Raspberry Pi Zero POD Case High quality case designed for the Raspberry Pi Zero series The Zero POD Case is the POD Series case designed fo...

SKU: WS-24080

Raspberry Pi 2.8inch LCD expansion module, 240 × 320 resistive touch screen for Raspberry Pi Zero / Zero 2 W Series boards, Works with other POD modules2.8inch LCD Display Module Designed for Raspberry Pi  The POD 2.8inch Resistive Touch Display Module is the 2.8inch LCD expansion ...

SKU: WS-25553

A 3 MP camera module built around the SmartSens SC3336 sensor, designed for use with LuckFox Pico series boards. The 1/2.8" CMOS sensor delivers high-sensitivity, high-SNR imaging with strong low-light performance, making it well suited for surveillance, computer vision, and night-time monitoring...

SKU: WS-30591 · MPN: 30591

A 5-megapixel wide-angle camera module built around the MIS5001 sensor, designed for the Luckfox Pico series development boards powered by the RV1106 chip. With high sensitivity and low dark current, this module delivers clear, low-noise images even in dimly lit conditions. Available in two lens...

SKU: TB-HP9552

The low cost way to build prototypes. Each donut is separated from its neighbours by about a 0.5mm gap. This effectively isolates each pad but also makes it easy to bridge solder across to make interconnections. Each board also has `fingers' on opposite ends with a 3.6mm edge pitch. These...

SKU: TB-HP9540

Vero board with Alpha numeric grid.

SKU: EL-2524206

These GlowBugs enable you to add colours to your CodeBug. Each GlowBug can be programmed to flash or glow any colour that you choose. They can be used for a variety of applications, including sewing them onto fabrics or as decorations around your home or working environment. Make your project...