Little Bird
Universal Pre-Punched Experimenters Boards - Medium
$9.05
|
In stock
The low cost way to build prototypes. Each donut is separated from its neighbours by about a 0.5mm gap. This effectively isolates each pad but also m...
Get notified when back in stock
Estimated Delivery
Arrives
Disclaimer
Secure checkout
The low cost way to build prototypes. Each donut is separated from its neighbours by about a 0.5mm gap. This effectively isolates each pad but also makes it easy to bridge solder across to make interconnections. Each board also has `fingers' on opposite ends with a 3.6mm edge pitch. These can be used to connect to and from the board or to a card edge connector. Finally the non- solder side of the board has an alpha- numeric grid printed on it to assist in component identification board layout.
Length 95mm Width 140mm Board type Doughnut PCB hole spacing 2.5mm PCB hole number 1450
Jargon buster
Plain-language definitions for the technical terms used above.
- PCB
- A printed circuit board (PCB) is a board, usually rigid, with etched copper tracks that connect electronic components together without loose wiring. Components are mounted on the board and signals route between them through the copper layout.
Find this product in
Related Tutorials
Free guides on learn.littlebird.com.au
