All Products

SKU: DF-FIT0783

A DC 5.5×2.1mm female to Micro-USB male power adapter plug, allowing you to power Micro-USB devices from a DC barrel jack power supply. Useful for powering Raspberry Pi, LattePanda, phones, and tablets from existing DC supplies. Specifications Input (Female) – DC 5.5×2.1 mm barrel jack Output...

SKU: AF-5447

A short-profile microSD-to-SD card adapter that sits 11 mm shorter than a standard SD card (excluding the silver lip). It protrudes far less from the card slot, reducing the risk of accidental damage — ideal for laptops, MacBooks, and embedded projects where a full-size SD adapter would stick out...

SKU: LB-1601201

Type-C OTG Adapter Splitter – USB-C & USB-A Power and Data Adapter Expand the versatility of your laptop, smartphone, or tablet with the Type-C OTG Adapter Splitter. Designed for seamless connectivity. Charge your device via USB-C while the USB-A can be used for multiple data transfer. Whether y...

SKU: SF-KIT-17727 · MPN: KIT-17727

Got a Raspberry Pi 4 ready to go? This bring-your-own-Pi kit bundles the accessories needed to turn an HDMI monitor into a Raspberry Pi desktop PC or media centre, without including the Raspberry Pi board itself.The kit includes a blank 64GB microSD card with adapter, selected for smooth Raspberr...

SKU: DF-FIT0784

A DC 5.5×2.1mm female to USB Type-C male power adapter plug, allowing you to power USB-C devices from a DC barrel jack power supply. Useful for powering Raspberry Pi 4/5, LattePanda, and other USB-C-powered boards from existing DC supplies. Also available in a Micro-USB version. Specifications ...

SKU: PH-TPH-018

The ZeroDock is an all-in-one desktop prototyping dock for your Raspberry Pi Zero. Little brother to ProtoDock, ZeroDock will keep your desk tidy and all of your Raspberry Pi Zero accessories in one place. No more searching for your micro-SD cards, SD adapters, HDMI adapters, USB shims, bread...

SKU: AF-6060 · MPN: ADA6060

Move an awkward card slot to somewhere easier to reach with this flexible SD to microSD extender. It gives you a long cable with a pseudo-card on one end and an SD card socket on the other, so you can plug into the host device and mount the socket wherever it is more convenient.It is a handy hack...

SKU: EC-RPA05036T

The 2-in-1 TF Card Dual System Switcher lets you install two MicroSD (TF) cards on a single Raspberry Pi and switch between them using a physical toggle. This allows you to run two different operating systems and swap between them without removing or swapping cards. The switcher can also be cont...

SKU: WS-31536 · MPN: 31536

Unleash the full potential of your Raspberry Pi 5 with the cutting-edge PCIe to M.2 Adapter with PoE Function (C). Designed with power users in mind, this highly adaptable expansion board offers seamless integration of high-speed NVMe protocol M.2 solid-state drives, ensuring accelerated reading ...

SKU: LB-32G-NOOBS

A Transcend 32GB Class 10 microSD card pre-loaded with the official Raspberry Pi NOOBS (New Out of Box Software) installer. NOOBS provides a simple menu-driven interface to choose and install your preferred Raspberry Pi operating system on first boot. Includes a full-size SD card adapter. Key Fe...

SKU: AF-6070 · MPN: ADA6070

If you need to add a panel-mount connection that extends a micro SD card, this Round Panel Mount MicroSD Adapter Plug is the easiest and fastest way to panel-ify your project. The adapter is about 30mm in diameter, so you can drill a hole in your wood, plastic or metal with a common hole-saw or b...

SKU: PI-CAB0907

A 15cm extension cable for a microSD card. Insert your microSD card into one end and then connect the other end to your Pi / PC / anything with a microSD socket and voila, you're connected!

SKU: ET-2461033

This is an 8GB micro SDHC card that is pre-installed with the NOOBS operating system for the Raspberry Pi Model 2 B. NOOBS is actually a system image with SIX different Linux based operating systems used to run on the Raspberry Pi, Archlinux, OpenELEC, Pidora, RaspBMC, Raspbian and RiscOS. This l...

SKU: SF-KIT-16383 · MPN: KIT-16383

This starter kit is built around the Raspberry Pi 4 Model B with 2 GB of RAM, giving you the core board and essential accessories needed to get a Pi 4 project running.The Raspberry Pi 4 uses Micro HDMI for display output and USB Type-C for power, so the kit includes a Micro HDMI to HDMI cable and...

SKU: AF-1294

Add mega-storage in a jiffy using this 8 GB class 4 micro-SD card. It comes with a SD adapter so you can use it with any of our shields or adapters. Preformatted to FAT so it works out of the box with our projects. Tested and works great with our Wave shield, Data logger shield and GPS shield,...

SKU: AF-5703

The Adafruit PiCowbell Adalogger is a Pico-sized add-on board that sockets underneath your Raspberry Pi Pico or Pico W, adding a microSD card slot, real-time clock with battery backup, and a STEMMA QT connector for I2C sensors — everything you need for data logging projects. The PCF8523 RTC keep...

SKU: SF-COM-14832

This is a class 10 32GB microSD memory card, perfect for housing operating systems for single board computers and a multitude of other information. Since this is a class 10 microSD it is capable of transferring data at speeds up to 80MB/s allowing it to have a noticeable increase in performance w...

SKU: LB-32G-MICROSD

A 32GB Class 10 microSD card pre-loaded with the latest Raspberry Pi OS, ready to boot on any Raspberry Pi model including the Raspberry Pi 5. Simply insert the card, power on your Pi, and you're up and running — no manual OS installation required. These microSD cards are tested by the Raspberry...

SKU: AF-2883

The Adafruit Pi Protector for Raspberry Pi Zero is a minimal, crystal-clear acrylic protector that keeps your pocket-sized Pi Zero safe without adding bulk. Just two acrylic pieces secured with four screws — sleek, lightweight, and perfect for carrying in your pocket. All edge connectors remain ...

SKU: PH-105824

A premium enclosure for the Raspberry Pi 5 and the Official Raspberry Pi 7" Touchscreen Display. Built with an anodised black aluminium frame and powder-coated steel base, the case provides durable protection while giving you access to the majority of Pi 5 ports — including a built-in power butto...