All Products

SKU: DF-DFR0997 · MPN: DFR0997

A 2.0-inch IPS colour display with 320 × 240 resolution and 16-bit colour depth (RGB565), supporting both I2C and UART communication via the Gravity connector. Powered by an ESP32-S3 chip with integrated LVGL graphics, it includes over 200 built-in icons, GIF animations, and dynamic widgets such ...

SKU: AF-1480

A 2.2″ TFT LCD breakout with 320 × 240 resolution and full 18-bit colour (262,144 shades), driven by an ILI9340 (or compatible) controller over 4-wire SPI. The onboard frame buffer means even low-memory microcontrollers can drive this display without issues. The breakout includes an ultra-low-dr...

SKU: AF-4311

A vibrant 2.0" IPS TFT display breakout with 320×240 resolution and full-colour output, driven by the ST7789 controller. The IPS panel delivers vivid colour reproduction and wide viewing angles — a significant upgrade over CSTN-type displays found in older LCD modules. The breakout communicates ...

SKU: SF-LCD-29766 · MPN: LCD-29766

Add a bright 2.8-inch colour display to your Raspberry Pi Pico project with this Pimoroni display pack. It uses a 320×240 pixel IPS LCD driven by an ST7789V controller, giving you a generous active screen area for menus, status displays, dashboards and simple graphics.The board includes four tact...

SKU: PI-PIM715 · MPN: PIM715

An expanded 2.8" (320 x 240 pixel) IPS LCD display add on for Raspberry Pi Pico / Pico W, with four buttons, an RGB LED and Qw/ST connectivity.Pico Display 2.8" features a bold, credit-card sized 320 x 240 pixel LCD display with lush colours and great IPS viewing angles. We've surrounded the disp...

SKU: DF-DFR0664

A 2.0" IPS TFT LCD display breakout with 320×240 resolution (RGB565), driven by the ST7789V controller. The wide 80° viewing angles in all directions ensure clear visibility, and the SPI interface makes it compatible with a broad range of microcontrollers including Arduino Uno, Leonardo, ESP32, E...

SKU: AF-1601

The Adafruit PiTFT 2.8" is a colour touchscreen display designed for the Raspberry Pi. Featuring a 2.8-inch 320×240 pixel TFT with 16-bit colour and a resistive touch overlay, it works as a mini console, X Window display, image viewer, or video player — all driven over the Pi's high-speed SPI int...

SKU: EC-ACS44240D

A 2.4″ colour TFT LCD touch shield from Elecrow that plugs directly onto an Arduino Uno or Mega. The ILI9341-driven display delivers 240 × 320 resolution with 18-bit colour (262,000 shades), and includes a 4-wire resistive touchscreen, microSD card slot, and reset switch. Key Features 240 × 32...

SKU: DF-KIT0144

The M1 Dock AI Development Kit is a compact embedded AI platform built around the Kendryte K210 chip — a dual-core RISC-V processor with an integrated neural network processor (KPU) and audio processor (APU). With MicroPython support built in, you can start developing AI applications quickly. Th...

SKU: AF-2455

The Adafruit PiTFT 2.4" HAT Mini Kit is a compact colour touchscreen display that plugs directly onto your Raspberry Pi's GPIO header. Featuring a 2.4-inch 320×240 pixel TFT with 16-bit colour and a resistive touch overlay, it's ideal for building interactive interfaces, mini consoles, or portabl...

SKU: SF-KIT-28667 · MPN: KIT-28667

Add vision and touch control to the Experiential Robotics Platform (XRP) Kit without soldering. This kit combines a Red Vision Touch Display for Pico with a compatible Himax HM01B0 colour camera board, enabling live image processing along with object and contour detection.The 2.0" capacitive touc...

SKU: AF-3315

A 2.4" TFT touchscreen display shield for the Adafruit Feather ecosystem. Featuring a 320×240 pixel display with 16-bit colour, a resistive touchscreen, and a built-in microSD card slot, this FeatherWing adds a full interactive display to any Feather board via SPI. Comes fully assembled with dua...

SKU: WS-19804

The 2.8" Touch Display Module is designed for the Raspberry Pi Pico, featuring a 320×240 IPS screen with 262K colours and a resistive touchscreen. It connects via the onboard female pin header for direct attachment to the Pico — no wiring required. Driven by the ST7789 display controller and XPT...

SKU: AF-2616

A 3.2" TFT display with 320×240 resolution and resistive touchscreen overlay, designed to plug directly onto any Raspberry Pi with a 2×20 GPIO header (Pi Zero, Pi 3, Pi 4, Pi 5, Model A+, and B+). The display connects via the high-speed SPI interface and can be used as a console output, X11 displ...

SKU: WS-24080

Raspberry Pi 2.8inch LCD expansion module, 240 × 320 resistive touch screen for Raspberry Pi Zero / Zero 2 W Series boards, Works with other POD modules2.8inch LCD Display Module Designed for Raspberry Pi  The POD 2.8inch Resistive Touch Display Module is the 2.8inch LCD expansion ...

SKU: EC-AMS320240TFT

The 2.8" TFT Touch Shield V4.3 is an Arduino-compatible display shield featuring a 240×320 colour LCD with a resistive touchscreen and onboard SD card socket. It communicates over SPI, keeping pin usage low and leaving more pins available for other components. Driven by the ILI9341 controller, t...

SKU: DF-DFR0706-EN

UNIHIKER is a compact single-board computer with a built-in 2.8-inch touchscreen, Wi-Fi, and Bluetooth. It features an array of on-board sensors — light sensor, accelerometer, gyroscope, and microphone — along with a co-processor for communicating with analogue, digital, I2C, UART, and SPI periph...

SKU: WS-19888

The Waveshare Pico-LCD-2 is a 2-inch IPS LCD display module designed to plug directly onto a Raspberry Pi Pico via its onboard female pin header. With 320×240 resolution and 65K RGB colours, it delivers clear, vibrant visuals for your Pico projects. The module uses an SPI interface requiring min...

SKU: AF-2315

The Adafruit PiTFT 2.2" HAT Mini Kit is a compact colour display that plugs directly onto your Raspberry Pi's GPIO header. Featuring a 2.2-inch 320×240 pixel TFT with 16-bit colour, it's perfect for use as a mini console, desktop display, image viewer, or video player — all driven over the Pi's h...

SKU: SF-KIT-30216 · MPN: KIT-30216

Add camera input and a capacitive touchscreen to an RP2350 RedBoard IoT for machine-vision projects. This kit combines the Red Vision Touch Display for RedBoard with the Red Vision Camera Board - HM01B0 (Color), and is designed for quick setup with no soldering required.The display board plugs di...