All Products

SKU: AF-2308

A 100 mm (4″) flexible WiFi antenna with approximately 4 dBi gain and a U.FL (IPEX) connector. The flexible design lets you bend and position the antenna to suit your enclosure or project layout, while the U.FL connector snaps directly onto boards without the need for an adapter. Key Features ...

SKU: AF-945

A 200 mm (8″) swivel dipole antenna with 5 dBi gain and an RP-SMA connector — the industry-standard fitting found on most WiFi routers and wireless modules. The higher gain compared to the 2 dBi version extends range at the cost of a larger form factor. The swivel joint lets you angle the antenna...

SKU: DF-FIT0505

A 2.4 GHz omni-directional antenna with 6 dBi gain and an IPEX MHF1 connector, providing strong WiFi signal reception and transmission. The 15 cm cable makes it easy to position the antenna away from the board for optimal placement. Key Features 6 dBi Gain – High gain for extended wireless ran...

SKU: SF-WRL-00558

A large 2.4 GHz rubber duck antenna with 5 dBi gain and a reverse-polarity SMA (RP-SMA) connector. At 196 mm (7.7″) long, it provides significantly more range than smaller duck antennas — ideal when you need to push your wireless link further. Key Features 5 dBi Gain – Higher gain for extended...

SKU: SF-WRL-00145

A 2.4 GHz rubber duck antenna with 2.2 dBi gain and a reverse-polarity SMA (RP-SMA) connector. At 100 mm (4″) long with 50 Ω impedance, it's a straightforward way to add an external antenna to WiFi, Bluetooth, ZigBee, or other 2.4 GHz RF modules. Key Features 2.2 dBi Gain – Omni-directional co...

SKU: AF-944

A 100 mm (4″) swivel dipole antenna with 2 dBi gain and an RP-SMA connector — the industry-standard fitting found on most WiFi routers and wireless modules. The swivel joint lets you angle the antenna for optimal signal direction. Key Features 2 dBi Gain – Omni-directional coverage for short-t...

SKU: EC-WAW24040A

A 2.4 GHz WiFi antenna with 4 dBi gain and an IPEX (MHF) connector, enclosed in a protective cover. It connects directly to boards with an IPEX/U.FL socket, providing improved wireless range over built-in PCB antennas. Key Features 4 dBi Gain – Higher gain than standard stub antennas for exten...

SKU: EC-WCW29099R

A 2.4 GHz directional flat-panel antenna with 14 dBi gain, designed for long-range WiFi links. Under ideal conditions, it can transmit or receive signals up to several kilometres, making it suitable for point-to-point wireless connections between buildings or across open areas. The antenna is ou...

SKU: SF-GPS-29691 · MPN: GPS-29691

This high-performance multi-band GNSS antenna is designed for applications that need high accuracy and continuous operation. It supports GPS, GLONASS, BeiDou and Galileo constellations across multiple frequency bands, plus L-band correction services.Built to outperform standard patch antennas, it...

SKU: SF-WRL-18569

This RP-SMA to U.FL Cable is commonly used to attach WiFi, Bluetooth, or nRFxxx based devices to a 2.4GHz antenna. What makes this unassuming cable special is the slightly longer length of 150mm (compared to 100mm). We found that the extra 50mm makes all the difference when working with an enclos...

SKU: SF-WRL-28767 · MPN: WRL-28767

The Taoglas FXP895 is a compact flexible PCB antenna for ISM and LoRa applications, designed to fit into small connected devices where space is tight.Its wideband 860 to 928MHz coverage suits regional ISM/LoRa frequency bands, helping one antenna design support multiple markets. The flexible PCB ...

SKU: SF-SPX-18572 · MPN: SPX-18572

This breakout is built around the EBYTE 915M30S module, giving you a 1W (30dBm) LoRa transceiver for long-range, low-data-rate wireless projects. LoRa is well suited to links over long distances, low-power sleep operation and data rates around ~500bps.The board is designed to connect to any platf...

SKU: SF-WRL-18086

This small form-factor antenna offers a 2.4GHz frequency range. These antennas offer adhesive backing that simplifies mounting within the device for a FPC or PCB. Just connect the antenna using the attached U.FL connector and then peel and stick! Features: Frequency range: 2400-2500Mhz Polariz...

SKU: DF-FIT0677

An aluminium alloy heatsink enclosure for the LattePanda V1 single board computer. The all-metal construction with black anodised and sandblasted finish provides excellent durability and a professional appearance. The bottom-mounted aluminium heatsink module with 12mm fins provides passive coolin...

SKU: AF-851

This RF adapter cable bridges the gap between small u.FL board connectors and standard SMA antennas. One end has a panel-mount SMA female connector, the other a u.FL (also known as IPEX, IPAX, IPX, MHF) plug — ideal for connecting external antennas to GPS modules, cellular modules, and other RF b...

SKU: AF-1859

This 2.4"/61mm long antenna has 2dBi of gain and 50Ω impedance so it will work fantastically with just about any 850/900/1800/1900/2100 wireless receiver/transmitter such as any Cellular or GSM/GPRS device. Antenna comes with a SMA connector, which is the most common type you'll see for Cell...

SKU: DF-FIT0872

A gold-plated IPEX (U.FL) to SMA male (inner needle) pigtail cable for connecting wireless modules to external antennas. The gold-plated connectors have passed 48-hour salt spray testing for long-lasting corrosion resistance. Built with RG1.13 wire and a high-density shielding layer, this cable ...

SKU: WS-19297 · MPN: 19297

This 5G omni-directional antenna provides 18dBi gain across a wide 600–6000MHz frequency range, covering 5G, 4G, 3G, and GNSS bands. The omni-directional radiation pattern delivers consistent signal quality in all directions without needing to orient the antenna toward a specific tower. It conne...

SKU: SF-WRL-17732 · MPN: WRL-17732

The Taoglas Steedan MA350 is a low-profile 5-in-1 combination antenna designed for vehicle roofs, outdoor buildings and heavy equipment where drilling through a roof or metal panel is not feasible. Its magnetic base mounts to steel surfaces using ultra-strong neodymium magnets, while a soft foam ...

SKU: AF-5444

An adapter cable that connects an RP-SMA antenna to RF modules with a w.FL (MHF3 / IPEX3) connector. Essential for adding external antennas to Wi-Fi, Bluetooth, and other RF boards that use the tiny w.FL port — such as the Adafruit Feather ESP32 V2. The cable is just over 20 cm (7.8″) long, with...