All Products

SKU: PL-1955

A pack of 25 steel, zinc-plated pan-head Phillips machine screws in the #2-56 thread size, 6.35 mm (1/4″) long. Commonly used in robotics, electronics enclosures, and small mechanical assemblies. Specifications Thread – #2-56 UNC (≈2.18 mm diameter, 0.45 mm pitch) Length – 6.35 mm (1/4″) Hea...

SKU: PL-1957

This #2-56, pan-head screw is 7/16″ long (0.4375″). It is made from steel, is zinc-plated, and comes in packs of 25.

SKU: PL-1959

A pack of 25 steel machine screws in the #2-56 thread size with a 1-1/4″ (31.75 mm) length. These pan-head Phillips screws are zinc-plated for corrosion resistance and are commonly used in robotics, electronics enclosures, and small mechanical assemblies. Specifications Thread Size – #2-56 Le...

SKU: SF-PRT-08993

A standard Phillips head machine screw with 2-56 thread and a length of 9.5 mm (3/8"). Compatible with 2-56 nuts for securing panels, button pads, and small electronic assemblies. Specifications Head Type – Phillips Thread – 2-56 Length – 9.5 mm (3/8") Ideal For Button pad and keypad asse...

SKU: SF-PRT-08995

Description: These are standard nuts with 2-56 thread. For use with 2-56 machine screws and five button pad set listed below. Sold in single units.

SKU: AF-4718

The Adafruit SPI Non-Volatile FRAM Breakout provides 2 Mbit (256 KBytes) of ferroelectric RAM (FRAM) storage over SPI. FRAM combines the non-volatile retention of flash with the instant read/write speed of SRAM — no page writes, no block erasing, and each byte can be written 10 trillion times wit...

SKU: SF-COM-24837 · MPN: COM-24837

The WS2812B is a compact 5050-sized SMD RGB LED with an integrated control circuit, making each LED individually addressable. Often referred to as a “NeoPixel”, it is widely used for addressable lighting projects and development board indicator lights.This 4-pin version breaks the LED out as Vcc,...

SKU: SF-COM-24210 · MPN: COM-24210

The PIC16F1829-I/SS is a compact 8-bit PIC microcontroller with Flash program memory, EEPROM and RAM onboard. It is suited to embedded control projects that need a small surface-mount MCU with common serial interfaces and analogue input capability.It supports I2C, LINbus, SPI and UART/USART inter...

SKU: SF-COM-30227 · MPN: COM-30227

The RV-1805-C3 is an ultra-low-power real-time clock module built for efficient, reliable timekeeping in battery-powered electronics. It integrates the crystal (XTAL) directly into a hermetically sealed ceramic package, removing the need for external clock tuning.With a maximum timekeeping curren...

SKU: AF-6115 · MPN: ADA6115

Add a bright red 16x8 LED matrix to your Raspberry Pi with this Adafruit CharliePlex LED Matrix Display Bonnet. It sits on any Raspberry Pi computer with a 2x20 connector, giving you a compact grid of 128 charlieplexed LEDs for patterns, text and simple graphics.The built-in IS31FL3731 Charlieple...

SKU: PR-PIM273

The Unicorn HAT HD packs 256 RGB LEDs in a 16×16 matrix onto a single Raspberry Pi HAT. With four times the resolution of the original Unicorn HAT, it enables complex animations, scrolling text, and even low-resolution video playback. An ARM STM32F chip handles all the LED driving, so your Pi ju...

SKU: EC-ACC35076R

This video tank robot vehicle uses ESP32 as the main board, with OV2640 camera, and can control the movement via WiFi. It has a digital microphone interface, which can adjust the volume. The APP can control the shooting, and transmit video recordings to the APP in real-time. It has two lights at ...

SKU: AF-3382

Are you ready? Really ready? Cause here comes the fastest, most powerful Metro ever. The Adafruit Metro M4 featuring the Microchip ATSAMD51. This Metro is like a bullet train, with it's 120MHz Cortex M4 with floating point support. Your code will zig and zag and zoom, and with a bunch of extra pe...

SKU: AF-3501

The Adafruit GEMMA M0 is a tiny, coin-sized microcontroller board designed for wearable electronics and small projects. Despite its quarter-sized footprint, it packs serious power with an ATSAMD21E18 32-bit Cortex M0+ processor, 256 KB of Flash, and 32 KB of RAM — a massive upgrade over the origi...

SKU: AF-906

You are learning to use the small Linux based board, the Raspberry Pi! Adafruit offers a fun and exciting "badges" of achievement for electronics, science and engineering. We believe everyone should be able to be rewarded for learning a useful skill, a badge is just one of the many ways ...

SKU: DF-DFR0463

Good news! There is a new member in to the Gravity family - The Flexible16x16 RGB LED Matrix! This module is a square panel with a soldered XH2.54 3-pin interface with pin mappings that perfectly match the Arduino I/O expansion shield. This flexible 16x16 RGB full-color LED matrix mo...

SKU: DF-DFR0461

Good news everyone! We have a new member to the Gravity family - The Flexible 8x8 RGB LED Matrix! This module is a square panel with a soldered XH2.54 3-pin interface with pin mappings that perfectly match the Arduino I/O expansion shield. This flexible 8x8 RGB full-color LED matrix module...

SKU: DF-DFR0459

The 8×8 RGB LED Matrix is a 64-pixel full-colour display panel based on WS2812 addressable LEDs. Each LED can be independently controlled with 256 brightness levels per channel, delivering over 16 million colours at a scan rate of 400Hz or higher. The module uses a single-wire data interface (XH...

SKU: DF-DFR0462

Good news! There is a new member in to the Gravity family - The Flexible 8x32 RGB LED Matrix! This module is a square panel with a soldered XH2.54 3-pin interface with pin mappings that perfectly match the Arduino I/O expansion shield. This flexible 8x32 RGB full-color LED matrix module...

SKU: AF-3505

The Adafruit Metro M0 Express brings 32-bit ARM power to the familiar Metro/UNO shield-compatible form factor. Powered by the ATSAMD21G18 ARM Cortex M0+ processor at 48 MHz, it offers 256 KB flash and 32 KB RAM — a massive upgrade over the ATmega328-based Metro. Designed from the ground up for Ci...