All Products

SKU: WS-24211

This HDMI to USB video capture adapter lets you capture HDMI video and audio directly to your computer via USB. Simply plug in an HDMI source — game console, camera, set-top box, or single-board computer — and it appears as a standard webcam device. No drivers required. Compatible with Windows, ...

SKU: TB-XC5191

Compact, USB-powered stereo speakers with a space-saving design for laptops and desktop PCs. Powered directly from your computer's USB port — no batteries or plug pack required. Features a separate volume control, power switch, and headphone output. Key Features USB Powered – No batteries or e...

SKU: PK-SI-168U

This is a handy little USB powered Soldering Iron.  Great for you on-the-go tool kit.It has a super slim tip for fine work and is replaceable.It has an auto sleep function where it powers off after 25 seconds of not being used.  This saves power and is a safety feature.●USB 5V Powered●1...

SKU: AF-1363

Add some extra boom to your audio project with these powered loudspeakers. We sampled half a dozen different models to find ones with a good frequency response, so you'll get quality audio output for music playback. Simply connect the standard 3.5mm stereo plug into your Raspberry Pi model B o...

SKU: SF-TOL-15571

This USB Power Meter is a versatile little tool that can provide voltage readings down to 0.01V and current to 0.001A, displayed on the built-in color TFT LCD, while your device is connected through it to a power source. You can also measure the capacity and power of battery packs/power banks as ...

SKU: AF-2379

A USB-A to Micro-B power-only cable with a built-in inline on/off switch. Perfect for powering a Raspberry Pi or any Micro USB device from a USB power supply, with the convenience of a physical power switch — no need to unplug the cable to turn your device on or off. Key Features Inline On/Off...

SKU: DF-SEN0279

The MB1414 USB-ProxSonar-EZ1 is an ultrasonic proximity and range sensor with a USB interface. It provides both proximity detection (target enter/exit a calibrated zone) and distance measurement with 1-inch resolution, making it ideal for people sensing and obstacle detection applications. With ...

SKU: DF-SEN0146

The USB-ProxSonar-EZ1 has a detection zone of ~5 feet and will allow for 8+ simultaneous sensors. The USB-ProxSonar-EZ ultrasonic proximity sensors feature an easy to use USB interface that connects directly to a computer with a standard Micro-B USB cable. The USB?ProxSonar?EZ sensors detect...

SKU: LB-LS2193

A clip-on LED desk light with adjustable brightness and colour temperature, ideal for illuminating soldering work, electronics projects, or general desk tasks. The centre hole lets you look through the light ring while working, keeping your view unobstructed. Key Features 3 Brightness Levels –...

SKU: TB-XC5802

Experience button mashing utopia in the comforts of your own home. In addition to retro arcade gaming goodness on your computer, you can also plug it into a Nintendo Switch, Raspberry Pi, Playstation 3 or Android TV. Features a joystick, 6 control buttons, 4 menu buttons and suction cups to avoid...

SKU: DF-DFR0173

A low power version of the USB-RLY16 module, the USB-RLY16L is powered solely from the USB bus and provides eight volt free contact relay outputs with a current rating of up to 16Amp each. The relays are SPCO (Single Pole Change Over) types and provide position 0, position 1 and common pins (latc...

SKU: EC-MCP00101P

This USBSerial Adapter is a compact USB to serial adapter equipped with BEE (20pin 2.0mm) sockets. With integrated FT232 IC, It can do many things such as used for programming(Arduino Pro Mini), debug some hardware or communicating with MCU applications. On the other hand, you may connect your...

SKU: AF-18

This USB-to-serial converter adds a DB9 RS-232 serial port to your computer via USB. Based on the FTDI FT232RL chip, it delivers true RS-232 voltage levels (approximately ±10V) rather than TTL 5V — ensuring compatibility with older devices like GPS receivers, handheld programmers, and other equip...

SKU: DF-DFR0164

This is a new version of the FTDI breakout board features an Atmega8U2 programmed as a USB-to-serial converter, the same chip found on the Arduino Uno. The 8U2 firmware uses the standard USB COM drivers, and no external driver is needed. However, on some Windows systems installing the drive...

SKU: LB-LS0040

Power your next project using the Australian Sun with this solar panel. The panel is capable of 3.5 watts in the open sun with a peak power output around 6V at 580-600mA. 6v 3.5w 580-600MA  High conversion rate, high efficiency output
. Operating voltage: 6v 
Power: 3.5W
 Work: cur...

SKU: DF-FIT0870

A USB to DC boost converter cable that steps up 5 V from a USB power source to either 9 V or 12 V output, selectable via a built-in switch. A digital LED display shows the current output voltage. Simply plug the USB end into a power bank, USB charger, or any 5 V USB source to power 9 V or 12 V de...

SKU: LB-USBTESTER

Real-time detection of the state of charge of the appliance, voltage, current, power and other indicators; The tester is widely used in the quality inspection of 3C digital and peripheral products of USB interface.It is the first choice for electronics enthusiasts; It adopts 0.96 inch IPS high...

SKU: DF-DFR0116

This is a USB AVR programmer supported by offical Arduino IDE. Once the Arduino has lost its bootloader for some reasons, use this programmer to reburn the bootloader and save the dead Arduino. This programmer works really well for ATmega168 and ATmega328 and should work with all the AVR micros ...

SKU: AF-2778

This cable is kinda fascinating - it has an integrated boost converter, so you can plug it into any USB port (from a computer, battery pack, etc) and it will give you a higher DC voltage! It's a handy way to power 12V powered devices with a center-positive 2.1mm DC barrel jack from a USB port....

SKU: AF-2777

This USB to DC booster cable has an integrated boost converter that steps up 5V USB power to 9V DC, output through a centre-positive 2.1 mm barrel jack. It's a convenient way to power 9V devices from any USB port — whether from a computer, USB wall charger, or battery pack. Rated for 500 mA cont...