All Products

SKU: DF-SEN0682 · MPN: SEN0682

This compact full-solid-state LiDAR module uses a 64×8 DTOF matrix to measure 512 points at once, giving robots and automation projects a wider view of what is directly ahead. It is designed for forward obstacle avoidance, local blind spot detection and other short-range 3D perception tasks.Direc...

SKU: SF-COM-16916 · MPN: COM-16916

Add letters, numbers and symbols to your project with red fourteen-segment digits that are much more flexible than a basic seven-segment display. This Qwiic display connects over I2C, so you can plug it in without soldering, without working out SDA and SCL by hand, and without adding separate vol...

SKU: SF-KIT-27213 · MPN: KIT-27213

This kit brings together the main parts needed to evaluate and deploy a LoRaWAN® IoT sensor system: a Digi HX15 Gateway for LoRaWAN®, a SparkFun IoT Node for LoRaWAN® board and a SparkFun ENS160/BME280 Qwiic Environmental Combo Board.The IoT Node ships with firmware installed that automatically c...

SKU: SF-ROB-26619 · MPN: ROB-26619

Build and program an XRP robot with a controller board designed for hands-on robotics learning, from beginner projects through to more advanced tasks. It brings together processing, motion control, sensors, wireless connectivity and expansion so students and makers can focus on building, coding a...

SKU: SF-PRT-21297 · MPN: PRT-21297

This compact regulator board makes it easy to power breadboard projects from a 6-12V supply. It provides a selectable regulated output of either 5V or 3.3V, making it handy for quick prototyping with common microcontrollers, sensors and logic circuits.Input power can be supplied through the DC ba...

SKU: AF-6455 · MPN: ADA6455

Build a digital nose for indoor air quality projects with this SGP41 gas sensor breakout. The Sensirion SGP41 is a fully integrated MOX gas sensor with I2C interfacing, so you do not need to manage heater control or analogue readings yourself.The sensor combines two MOX hot-plate sensing elements...

SKU: AF-6495 · MPN: ADA6495

This BFF add-on makes it much easier to wire up small QT Py and Xiao projects without juggling loose jumpers. Plug in a compatible board and each pin is brought out to a screw-terminal block, with an extra socket pin available for quick wire connections.It also adds a Stemma QT / Qwiic connector ...

SKU: AF-5779 · MPN: ADA5779

This swirly aluminium mounting grid gives small maker boards a sturdy mechanical base when you are building plug-and-play projects with STEMMA QT boards, sensors, Feathers and other 0.1 inch-spaced PCBs.It is made using a single-sided aluminium-core PCB process, but there is no copper layer — jus...

SKU: AF-6115 · MPN: ADA6115

Add a bright red 16x8 LED matrix to your Raspberry Pi with this Adafruit CharliePlex LED Matrix Display Bonnet. It sits on any Raspberry Pi computer with a 2x20 connector, giving you a compact grid of 128 charlieplexed LEDs for patterns, text and simple graphics.The built-in IS31FL3731 Charlieple...

SKU: AF-6407 · MPN: ADA6407

This Bosch BMP581 breakout is a precision barometric pressure, temperature and altimeter sensor for environmental sensing, drones, wearables and projects that need to track height above sea level. It offers much finer pressure precision than earlier BMP2xx and BMP3xx generations, making it well s...

SKU: AF-6411 · MPN: ADA6411

Bosch’s BMP580 is a precision barometric pressure, temperature and altimeter sensor for projects that need fine height or pressure tracking. It follows on from Bosch’s BMP2xx and BMP3xx sensors and can be used over either I2C or SPI.Use I2C for simple wiring, or SPI when you want to connect multi...

SKU: SF-SEN-30282 · MPN: SEN-30282

Build a connected weighing system without starting from low-level load cell code. OpenScale IoT is a wireless scale controller built around the ESP32-PICO-MINI, designed to turn a standard load cell setup into a configurable, connected weigh scale.Attach a four or five-wire load cell, or use four...

SKU: SF-SEN-30161 · MPN: SEN-30161

Built around the VCNL4040, this tiny Qwiic Micro breakout provides short-range presence detection for projects where space and weight are tight. It is designed for qualitative sensing: detecting whether an object is present within range and whether it is getting closer or moving farther away, rat...

SKU: SF-SEN-26092 · MPN: SEN-26092

Visualise magnetic fields in real time with a dense 8x8 array of Hall-effect sensors. This tile lets you observe nearby magnets, current flow in wires and fields generated by electric motors as a live magnetic image.The sensors are highly sensitive, with best imaging performance within 1cm to 2cm...

SKU: SF-SEN-29260 · MPN: SEN-29260

Measure high concentrations of carbon dioxide with a Qwiic breakout built around Sensirion’s STC31 sensor. It is designed for CO2 measurements up to 100% volume, using a thermal conductivity measurement principle and Sensirion CMOSens® technology for repeatable, stable readings.The board also inc...

SKU: SF-DEV-27924 · MPN: DEV-27924

Control a project with muscle activity instead of buttons, levers or joysticks. The MyoWare® 2.0 Muscle Sensor is an all-in-one surface electromyography (sEMG) sensor that detects the electrical signals generated when a muscle flexes, then outputs an analogue signal representing the strength of t...

SKU: ED-6550153625646 · MPN: MK-AB-1

Air:bit 2 is a STEAM drone kit for the BBC micro:bit that students build, code and fly. It combines the approachable micro:bit platform with a hands-on drone project for learning coding, engineering and technology.Note: micro:bits are not included as standard with this kit. The supplier recommend...