All Products
Showing 61-80 of 100 products
SparkFun Thing Plus - ESP32-S3
·
The SparkFun ESP32-S3 Thing Plus adds a powerful and versatile IoT development platform to the Thing Plus product line. It features the ESP32 WROOM-S3 MINI wireless module from espressif™. The ESP32 WROOM-S3 is built around an Xtensa® 32-bit LX7 processor with massive processing power that operat...
Thing Plus ESP32 WROOM (U.FL)
·
Built around Espressif’s ESP32-WROOM-32UE module, this Thing Plus board gives you a compact foundation for connected projects that need WiFi, Bluetooth and a flexible antenna setup. The onboard U.FL connector lets you attach a suitable external antenna for installations where a PCB antenna is not...
SparkFun MicroMod ESP32 Processor
The SparkFun MicroMod ESP32 Processor Board brings Espressif's ESP32 into the MicroMod ecosystem via the M.2 connector interface. It provides WiFi and Bluetooth connectivity with the processing power of a dual-core Tensilica LX6 at 240 MHz. Simply align the keyed edge connector with any MicroMod...
SparkFun MicroMod STM32 Processor
The SparkFun MicroMod STM32 Processor Board brings the power of the STM32F405 ARM Cortex-M4 microcontroller to the MicroMod ecosystem. Operating at up to 168 MHz with a hardware floating point unit (FPU) and full DSP instruction set, this processor board delivers serious performance in a compact ...
XRP Robotics Platform Kit - Set of 10
·
This set of 10 XRP kits is designed for classrooms, robotics clubs and teams that need multiple hands-on robots for learning, coding and experimentation. The platform supports beginner through advanced activities, helping students build skills in science, engineering and problem-solving.Each kit ...
SparkFun ESP8266 Thing - Dev Board
This is the SparkFun ESP8266 Thing Dev Board – a development board that has been solely designed around the ESP8266, with an integrated FTDI USB-to-Serial chip. The ESP8266 is a cost-effective, and very capable WiFi-enabled microcontroller. Like any microcontroller, it can be programmed to blink ...
SparkFun MicroMod WiFi Function Board - DA16200
The SparkFun MicroMod DA16200 Function Board adds fully integrated Wi-Fi connectivity to any MicroMod project. Built around the DA16200 module with an Arm Cortex-M4F processor, it includes a 40 MHz crystal oscillator, 32.768 kHz RTC, 4 MB flash memory, and an on-board chip antenna — everything ne...
SparkFun RedBoard Artemis Nano
The SparkFun RedBoard Artemis Nano packs the powerful Artemis module into a minimal, 0.8 mm thick PCB with USB-C programming, on-board LiPo battery charging, and a Qwiic connector. It's a compact, modern replacement for the Arduino Uno or Nano with significantly more processing power, memory, and...
SparkFun Qwiic OLED Display (0.91 in., 128x32)
·
The SparkFun Qwiic OLED Display is a compact 0.91″ (diagonal) monochrome OLED screen with 128 × 32 pixel resolution, capable of displaying up to four lines of text. As an OLED, it has no backlight layer — resulting in a thinner profile, lower power consumption, and higher contrast compared to LCD...
PD Stepper NEMA 17 USB-C PD Driver and Controller
·
Stepper motor builds often need a microcontroller, a separate driver, a 12V or 24V supply and plenty of wiring. This compact controller from Things by Josh brings that stack together in one unit designed to mount directly to the back of a standard NEMA 17 stepper motor.Power comes in via USB-C Po...
SparkFun Humidity and Temperature Sensor Breakout - Si7021
A low-cost, highly accurate digital humidity and temperature sensor breakout board based on the Silicon Labs Si7021. Communicates over I²C with just two data lines, providing relative humidity and precise temperature readings for environmental monitoring projects. The breakout includes built-in ...
SparkFun LiPo Charger/Booster - 5V/1A
The SparkFun LiPo Charger/Booster is a compact board that charges a single-cell lithium polymer battery and boosts its output to a regulated 5V at up to 1A. Built around the MCP73831 charge controller and PAM2401 boost converter, it's an economical solution for powering 5V projects from a LiPo ce...
SparkFun ESP32 Thing
The SparkFun ESP32 Thing is a comprehensive development platform for Espressif’s ESP32, their super-charged version of the popular ESP8266. Like the 8266, the ESP32 is a WiFi-compatible microcontroller, but to that it adds support for Bluetooth low-energy (i.e BLE, BT4.0, Bluetooth Smart), and...
SparkFun Thing Plus - ESP32-S2 WROOM
The SparkFun Thing Plus ESP32-S2 WROOM is a Feather form-factor development board built around Espressif's ESP32-S2 SoC with integrated 2.4 GHz Wi-Fi. It features enhanced security over the original ESP32, including transparent flash and RAM encryption, secure boot with signed firmware, and dedic...
GNSS Timing Breakout - ZED-F9T-20B (Qwiic)
·
Built around the u-blox ZED-F9T-20B receiver, this breakout is made for projects where precise time matters as much as location. Under clear skies it can provide five nanoseconds of timing accuracy without requiring external GNSS correction data, making it suitable for 5G IoT networks, distribute...
Allband GNSS RTK Breakout - mosaic-G5 P3
·
Built around Septentrio’s mosaic-G5 P3, this compact GNSS RTK breakout is designed for projects that need survey-grade positioning without giving up space or power budget. It offers the same leading performance as the mosaic-X5 in a package that is 60% smaller and consumes 40% less power.The rece...
SparkFun Thing Plus - SAMD51
The SparkFun Thing Plus SAMD51 is a development board built around the ATSAMD51J20 — a 32-bit ARM Cortex-M4F microcontroller with floating point unit, running at up to 120 MHz. It offers substantial processing power in a compact, Feather-compatible form factor. The board includes a Qwiic connect...
SparkFun ESP8266 Thing
The SparkFun ESP8266 Thing is a breakout and development board for the ESP8266 WiFi SoC — a popular platform for IoT and WiFi-connected projects. All module pins are broken out to breadboard-compatible rows, and on-board power management includes a LiPo charger, 3.3V regulator, and power switch. ...
SparkFun Qwiic Mini ToF Imager - VL53L5CX
The SparkFun Qwiic Mini ToF Imager is a 64-pixel Time-of-Flight ranging sensor built around the STMicroelectronics VL53L5CX. It provides multizone distance measurements up to 4000 mm across a 4×4 or 8×8 grid with a 63° diagonal field of view. The compact Mini version measures just 12.7 × 25.4 mm ...
SparkFun 6DoF IMU Breakout - BMI270 (Qwiic)
The SparkFun BMI270 6DoF IMU Breakout is a Qwiic-enabled board featuring the ultra-low-power BMI270 inertial measurement unit from Bosch. It combines a 16-bit tri-axial accelerometer and 16-bit tri-axial gyroscope with intelligent on-chip motion detection features optimised for wearable applicati...
