All Products
Showing 61-80 of 100 products
Arduino RS232 to TTL Converter with DB9 (MAX202)
This converter uses MAX202-based level shifter for converting TTL (Transistor-Transistor Logic) -level serial to standard RS232 serial.RS232 is widely used in radio modifications,phone flash, XBOX360 flash, GPS, vehicle detection, DVD flash, hard disk repair set-top box upgrade. It can be used to...
Gravity: MOSFET Power Controller
In most Arduino projects, relays are the first choice to drive some large current device. It requires a certain amount of current to drive the internal coil to pick-up contact. But for some MCU, like Intel Edison, Intel joule, lilypad, Raspberry Pi and other microcontroller with limited amoun...
Adafruit Pro Trinket - 3V
·
Note: The Pro Trinket's bit-bang USB technique is a legacy approach that may not work reliably with modern operating systems. For new projects, consider an ItsyBitsy or Metro Mini board with native USB support at a comparable price. The Adafruit Pro Trinket 3V is a compact ATmega328P-based mic...
SparkFun FTDI Basic Breakout - 3.3V
The SparkFun FTDI Basic Breakout provides USB-to-serial conversion using the FTDI FT232RL IC, operating at 3.3V logic levels. Its 6-pin header matches the standard FTDI pinout, making it compatible with Arduino Pro, LilyPad, and other 3.3V boards that use the FTDI connector. The board brings out...
Adafruit Feather M0 Express - Designed for CircuitPython [ATSAMD21 Cortex M0]
·
The Feather M0 Express is Adafruit's CircuitPython-optimised Feather, built around the ATSAMD21G18 ARM Cortex M0+ processor. It combines the standard Feather M0 platform with 2 MB of SPI flash storage, a Mini NeoPixel, and a UF2 bootloader for drag-and-drop programming — no special tools or drive...
Adafruit Ultimate GPS Breakout - 66 channel w/10 Hz updates [Version 3]
·
The Adafruit Ultimate GPS Breakout (Version 3) is a high-performance GPS module built around the MTK3339 chipset. With 66 channels, -165 dBm tracking sensitivity, and up to 10 Hz position updates, it delivers accurate and responsive location data for a wide range of projects. Version 3 introduce...
Budget Pack for Arduino [Metro Uno w/328]
·
This budget pack is an optimized collection of parts and pieces to experiment with Adafruit Metro 328 and the Arduino IDE at home, school or work. Great for students and those that want to get their feet wet, no soldering required!Includes the Adafruit Metro 328 with thru-hole heade...
DFRduino Nano V3.1 (Arduino Nano Compatible)
The DFRduino Nano USB Microcontroller V3.1 (ATMega 328) is a breadboard ready version of the Arduino mini with integrated USB. The arduino Nano has everything that the Diecimila has (electronically) with more analog input pins and an on-board +5V AREF jumper. The arduino Nano automatically se...
Adafruit Feather M0 RFM69HCW Packet Radio - 868 or 915 MHz
·
The Feather M0 RFM69HCW Packet Radio (868/915 MHz) combines the ATSAMD21G18 ARM Cortex M0+ processor with an SX1231-based RFM69HCW radio transceiver for wireless data communication at 868 or 915 MHz. The exact radio frequency is software-configurable, allowing you to tune dynamically for your reg...
Adafruit Feather M0 RFM69HCW Packet Radio - 433MHz
·
The Feather M0 RFM69HCW Packet Radio (433 MHz) combines the ATSAMD21G18 ARM Cortex M0+ processor with an SX1231-based RFM69HCW radio transceiver for wireless data communication at 433 MHz. It includes built-in USB, LiPo battery charging, and the full Feather M0 pin set in a compact, portable form...
Adafruit Feather M0 RFM96 LoRa Radio - 433MHz
·
The Feather M0 RFM96 LoRa Radio (433 MHz) combines the ATSAMD21G18 ARM Cortex M0+ processor with an SX1276-based LoRa radio transceiver for long-range wireless communication at 433 MHz. LoRa modulation delivers significantly greater range than conventional packet radio — over 2 km line-of-sight w...
Adafruit Feather M0 with RFM95 LoRa Radio - 900MHz
·
The Feather M0 RFM95 LoRa Radio (900 MHz) combines the ATSAMD21G18 ARM Cortex M0+ processor with an SX1276-based LoRa radio transceiver for long-range wireless communication at 868 or 915 MHz. The exact frequency is software-configurable, allowing you to tune dynamically for your region's ISM ban...
Gravity: Arduino PIR (Motion) Sensor
A passive infrared (PIR) motion sensor from DFRobot's Gravity series. It detects infrared radiation from people and animals in motion and outputs a digital HIGH signal when movement is detected — ideal for security systems, occupancy sensing, and automated lighting projects. The sensor operates ...
Adafruit Feather 32u4 RFM95 LoRa Radio - 868 or 915 MHz
·
The Feather 32u4 RFM95 LoRa Radio (868/915 MHz) combines an ATmega32u4 microcontroller with an SX1276 LoRa radio transceiver, USB connectivity, and LiPo battery charging. LoRa modulation provides dramatically longer range than standard packet radio — over 2 km line-of-sight with default settings ...
SparkFun Beefy 3 - FTDI Basic Breakout
The SparkFun Beefy 3 is an FTDI Basic Breakout board based on the FT231X USB-to-serial IC. Unlike standard FTDI breakouts, it features an AP2112K voltage regulator capable of supplying up to 600mA at 3.3V — enough to power a 3.3V project directly from the board's USB connection. The 6-pin header...
Adafruit Feather 32u4 RFM96 LoRa Radio - 433MHz
·
The Feather 32u4 RFM96 LoRa Radio (433 MHz) combines an ATmega32u4 microcontroller with an SX1276 LoRa radio transceiver operating at 433 MHz, USB connectivity, and LiPo battery charging. LoRa modulation provides dramatically longer range than standard packet radio — over 2 km line-of-sight with ...
Adafruit Feather 32u4 RFM69HCW Packet Radio - 868 or 915 MHz
·
The Feather 32u4 RFM69HCW Packet Radio (868/915 MHz) combines an ATmega32u4 microcontroller with an SX1231-based packet radio transceiver, USB connectivity, and LiPo battery charging. It offers longer range than 2.4 GHz protocols (Bluetooth, Wi-Fi, ZigBee) with more flexibility than BLE, making i...
Adafruit Feather 32u4 with RFM69HCW Packet Radio - 433MHz
·
The Feather 32u4 RFM69HCW Packet Radio (433 MHz) combines an ATmega32u4 microcontroller with an SX1231-based packet radio transceiver operating at 433 MHz, USB connectivity, and LiPo battery charging. It offers longer range than 2.4 GHz protocols (Bluetooth, Wi-Fi, ZigBee) with more flexibility t...
Gravity:Analog Grayscale Sensor For Arduino
The Gravity Analogue Grayscale Sensor measures reflected light intensity, outputting an analogue value that ranges from black (low) to white (high). It uses a photocell paired with an integrated white LED to illuminate the surface being measured, making it effective for detecting surface brightne...
Adafruit Feather M0 WiFi with uFL - ATSAMD21 + ATWINC1500 [fw 19.4.4]
·
The Feather M0 WiFi with uFL pairs the ATSAMD21G18 ARM Cortex M0+ processor with an ATWINC1500 Wi-Fi module, featuring a uFL connector instead of an on-board antenna. This allows you to connect an external 2.4 GHz antenna for improved range or custom antenna placement in enclosures. The ATWINC15...