All Products

SKU: TB-XC4472

This versatile motor and servo controller shield for Arduino drives up to 4 bidirectional DC motors or 2 stepper motors, plus 2 servos — all from a single board. The 4 onboard H-bridges provide 0.6A per channel (1.2A peak) with thermal protection, and the dedicated servo ports use the Arduino's h...

SKU: AF-2941 · MPN: 2941

This tiny DC Motor in Micro Servo Body is an interesting motor - it's the same size and shape as our micro servo but it isn't a servo. It's more like a DC motor + plastic gear-train in a box. It's not a super powerful motor, it would do well as a little robot wheel. It's also a lot less e...

SKU: AF-2928 · MPN: 2928

The 8-Channel PWM or Servo FeatherWing adds 8 channels of 12-bit PWM output to any Adafruit Feather board via I2C. It uses an onboard PWM driver with a built-in clock, so it runs independently without tying up your microcontroller — unlike the TLC5940 family, no continuous signal is needed. The ...

SKU: AF-2744 · MPN: 2744

We're keepin' it wheel with this one! Need a great drive solution for your little robotic friends? This black plastic Micro Continuos Rotation Servo Wheel is equipped with a silicone tire and a press-fit design to make connecting to your F...

SKU: SF-ROB-09347

Here, for all your mechatronic needs, is a simple, high quality continuous continuous rotation servo motor. This servo is able to take in 6 volts and deliver 66.7 oz-in. of maximum torque at 70 r/min. A standard 3-pin power and control cable is attached and all hardware listed below is included...

SKU: AF-154 · MPN: 154

This servo rotates fully forward or backwards instead of moving to a position. You can use any servo code, hardware or library to control these servos. Good for making simple moving robots. Comes with four different horns, as shown.To control with an Arduino, we suggest connecting the contro...

SKU: AF-2307 · MPN: 2307

This high-powered micro servo packs nearly double the stall torque of standard micro servos into a compact metal-geared package. With approximately 180° of rotation, it works with any standard servo library, driver, or controller — including the Arduino Servo library, motor shields, and 16-channe...

SKU: AF-2327 · MPN: 2327

The Adafruit 16-Channel PWM/Servo HAT adds precision servo and PWM control to your Raspberry Pi. Using the PCA9685 I2C PWM controller, it drives up to 16 servos or PWM outputs simultaneously with 12-bit resolution — completely free-running with no Pi processing overhead. Up to 62 HATs can be sta...

SKU: AF-2201 · MPN: 2201

This is just about the cutest, tiniest little micro servo we could find, even smaller than the 9 gram micro servos we love so much.  It can rotate approximately 180 degrees (90 in each direction) and works just like the standard kind you're used to but much smaller.  You can use an...

SKU: TB-YM2758

A compact 9g micro servo motor ideal for small robotics, pan-and-tilt mechanisms, and Arduino projects. With 1.6 kg·cm of torque and a fast 500°/sec speed, it's well-suited for lightweight applications where space is limited. The servo connects directly to an Arduino digital pin and is controlle...

SKU: AF-1449 · MPN: 1449

A plastic-geared micro servo with an extra trick — a fourth wire brings out the internal potentiometer feedback signal, letting you read the servo's actual position via an analog input. This feedback capability enables motion recording, playback, and improved stability in robotics applications. ...

SKU: AF-1450 · MPN: 1450

A metal-geared micro servo with an extra trick — a fourth wire brings out the internal potentiometer feedback signal, letting you read the servo's actual position via an analog input. This feedback capability enables motion recording, playback, and improved stability in robotics applications. Th...

SKU: KI-5612

Take your robotics project to the next level with the (i2C) Kitronik 16 Servo Driver Board for the BBC micro:bit.Capable of controlling 16 servos which are powered directly from the board's power supply. The board can be powered either through the terminal blocks or the on-board header for radio ...

SKU: LB-LR0309-57

The servo tester and controller can be used as a signal generator for electronic speed controllers.   If you are looking for a low-cost way to get a servo up and running without any programming, you can plug directly into the servo tester.     There are 3 modes that can be use:...

SKU: PL-3551

This small gripper uses a rack and pinion design with a servo-driven pinion and opposing racks to keep the gripper paddles synchronized and parallel to each other throughout its 32 mm range of motion. It includes a special micro servo with an additional wire that gives access to its feedbac...

SKU: PI-COR-DS929-MG

The DS-929MG is a compact, metal-geared digital servo that delivers reliable performance at an excellent price point. With high-resolution positioning and fast response times, it's a versatile all-rounder for robotics, RC, and embedded projects. Key Features Metal Gearing – Durable metal gears...

SKU: AF-1143 · MPN: 1143

Add more power to your robot with this metal-geared MG90S servo. The tiny little servo can rotate approximately 90 degrees (45 in each direction), and works just like the standard kinds you're used to but smaller. You can use any servo code, hardware or library to control these servos. Good for b...

SKU: LB-BK-LR0259-10

A bulk pack of ten 9-gram micro servos — an affordable way to stock up for robotics, mechatronics, and RC projects. Each servo includes a ~25cm cable with a standard 3-pin female header, plus a full set of horn and screw accessories. These compact servos deliver 1.6 kg/cm of torque at 6.0V with ...

SKU: AF-1142 · MPN: 1142

This high-torque standard servo now comes in a metal-gear flavor, for extra-high torque (10 kg*cm!) and reliability! It can rotate at least 120 degrees (60 in each direction) with a classic 1.5-2.5ms pulse, but if you can extend your pulses it can go up to about 170 degrees - it varies a bit serv...

SKU: LB-PT7009-13

This High-Torque MG996R Digital Servo features metal gearing resulting in extra high 10kg stalling torque in a tiny package. The MG996R is essentially an upgraded version of the famous MG995 servo, and features upgraded shock-proofing and a redesigned PCB and IC control system that make it m...